Process Data set: EQLQ Tube Pure 5G2,5 (en)

Process Data set: EQLQ Tube Pure 5G2,5 (en) en

Process information

Key Data Set Information
Location	FI
Geographical representativeness description	Scandinavia (El.mix during use stage (B6) is Swedish)
Reference year	2024
Name	EQLQ Tube Pure 5G2,5
Technical purpose of product or process	Halogen-free, flame retardant and self-extinguishing cable. Smoke in the event of fire is limited, transparent (to facilitate evacuation) and not harmful to electronic equipment. Suitable for fixed installation indoors and outdoors, in pipes, duct, in or under plaster, also suspended in catenary system. The cable is not approved for EX classified areas, instead we recommend a filled cable, for example EQLQ Filled Pure. Can be installed in ground if the cable is provided with additional protection against mechanical damage. UV protected for outdoor use in the Nordic countries. The conductor insulation shall be protected against UV light in lighting fixtures and light signs. Conductor material: Copper Core insulation material: XLPE Screen material: Aluminium Material outer sheath: Halogen-free polymer Cable shape: Round
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Prysmian Group Sverige AB
Quantitative reference
Reference flow(s)	EQLQ Tube Pure 5G2,5 - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-07-11" - "2029-07-11"
Publication date	2024-07-11
Technological representativeness
Technology description including background system	EQLQ Tube Pure 5G2,5 SAP code 20314605 E no. 0461350 STANDARDS APPLIED: SS 424 02 19-6 Construction standard

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

NEPD-7104-6499_EQLQ-Tube-Pure-5G2-5.pdf

Original EPDs

NEPD-7104-6499

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-09-30T11:44:01
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	e3fc09d6-8f1e-4345-9ffc-cabc79372528
Date of last revision	2024-07-08T05:41:46.6102511Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-7104-6499
Owner of data set	Prysmian Group Sverige AB
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	1.933	0.009593	0.62	0.01407	0.05166	15.32	0.002344	0.0006816	0.002832	-0.8841
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	1.933	0.009593	0.62	0.01407	0.05166	15.32	0.002344	0.0006816	0.002832	-0.8841
Use of non renewable primary energy (PENRE)	Input	MJ	10.74	0.8232	2.078	0.9967	0.2968	31.93	0.1661	0.01326	0.0273	-0.9348
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	1.965	0	0	0	0.002374	0	0	-1.846	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	12.7	0.8232	2.078	0.9967	0.2992	31.93	0.1661	-1.833	0.0273	-0.9348
Use of secondary material (SM)	Input	kg	0.02588	0	0	0	0.0005176	0	0	0	0	0.007594
Use of renewable secondary fuels (RSF)	Input	MJ	0.04283	0.0003275	0.007256	0.0005034	0.001021	0.05936	0.0000839	0.00001506	0.00005875	0.0005319
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.0007752	0.001029	0.02322	0.001797	0.0005436	0.1875	0.0002995	0	0.00005946	-0.0319
Use of net fresh water (FW)	Input	m3	0.01374	0.00008136	0.002318	0.000105	0.000328	0.03479	0.00001749	0.0001	0.00003503	-0.002529
Hazardous waste disposed (HWD)	Output	kg	0.006367	0.00004204	0.005273	0.00005083	0.0002799	0.001667	0.000008472	0	0.002251	-0.00009583
Non hazardous waste dispose (NHWD)	Output	kg	0.2949	0.05065	0.01048	0.04764	0.01016	0.1052	0.007939	0	0.09654	-0.02865
Radioactive waste disposed (RWD)	Output	kg	0.0000371	0.000005643	0.00002247	0.000006796	0.000001467	0.0004804	0.000001133	0	1.864E-7	-0.000003241
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.0001311	0	0.001594	0	0	0.07959	0.000004039	-0.0002972
Materials for energy recovery (MER)	Output	kg	0	0	0.02194	0	0.001339	0	0	0.04503	9.878E-8	-0.00003913
Exported electrical energy (EEE)	Output	MJ	0	0	0.01295	0	0.00173	0	0	0.07357	0.000006408	-0.00009587
Exported thermal energy (EET)	Output	MJ	0	0	0.1959	0	0.02618	0	0	1.113	0.00009695	-0.00145

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	12.61	0.8231	2.007	0.9967	0.3329	31.86	0.1661	0.01326	0.02729	-0.9349
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0002327	9.331E-7	5.501E-7	0.00000179	0.000004726	0.00001088	2.984E-7	9.987E-9	9.058E-9	-0.0000244
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.02818	0.0006006	0.0002985	0.0002702	0.0005885	0.00177	0.00004503	0.00002182	0.000009203	-0.004737
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.01089	0.00002082	0.002861	0.00002695	0.0002761	0.005526	0.000004492	0.000002021	4.712E-7	-0.0003548
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	0.8499	0.05557	0.07793	0.0661	0.0236	0.2719	0.01102	0.1137	0.005892	-0.08043
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.8622	0.05561	0.08151	0.06615	0.02392	0.2951	0.01102	0.1137	0.005893	-0.08195
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.001443	0.00002117	0.0007216	0.00002311	0.00004426	0.01766	0.000003851	3.666E-7	3.864E-7	-0.001162
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.859	0.05561	0.102	0.06615	0.02427	0.2947	0.01102	0.1137	0.006137	-0.06582
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0002369	3.774E-7	0.000002937	5.191E-7	0.000004818	0.00001839	8.651E-8	1.81E-8	1.81E-8	-0.0000318
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.00198	0.0001587	0.00005339	0.00008013	0.00004609	0.0003016	0.00001336	0.00001045	0.000008641	-0.0002374
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.02821	0.001761	0.0006124	0.0008862	0.0006353	0.00397	0.0001477	0.0001082	0.0000369	-0.003415
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.007314	0.0004901	0.0001567	0.0002713	0.0001663	0.0009042	0.00004522	0.00002605	0.00001156	-0.000958
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	6.136E-8	1.241E-8	9.294E-9	1.507E-8	2.024E-9	1.333E-7	2.511E-9	2.01E-10	3.45E-10	-0.0004701
Water (user) deprivation potential (WDP)	m3 world eqv.	58.94	0.57	110.6	0.9508	3.437	3234	0.1585	0.08504	0.5232	-27.26

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.03901	0.003586	0.04901	0.004357	0.001938	0	0	0	0	0	1.092	0	0	0.0007261	0.00003158	0.0001632	-0.003535
Potential incidence of disease due to PM emissions (PM)²	disease incidence	9.058E-8	3.92E-9	1.399E-9	4.758E-9	2.034E-9	0	0	0	0	0	1.275E-8	0	0	7.93E-10	9.3E-11	1.69E-10	-1.529E-8
Potential Soil quality index (SQP)²	unitless	6.529	0.6947	1.226	0.6872	0.1865	0	0	0	0	0	14.11	0	0	0.1145	0.002289	0.06877	-1.131
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	4.5E-7	5.98E-10	1.031E-9	7.93E-10	9.057E-9	0	0	0	0	0	1.165E-8	0	0	1.32E-10	2.42E-10	3.4E-11	-5.039E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	6.252E-9	0	3.9E-11	0	1.26E-10	0	0	0	0	0	4.83E-10	0	0	0	6E-12	1E-12	-6.95E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	321.4	0.5762	1.473	0.7341	7.116	0	0	0	0	0	16.82	0	0	0.1223	0.1772	31.29	-41.31