Process Data set: ArcelorMittal Construction Cofraplus 80 - Cofraplus 220 (en) en
Process information
| Key Data Set Information | |
| Location | FR |
| Geographical representativeness description | The main market areas are the Nordic countries. |
| Reference year | 2024 |
| Name |
|
| Use advice for data set | Type of EPD: cradle to gate - with options. All relevant life cycle stages are covered. Modules A1-A5, C2-C4 and module D were considered. The product stages A1-A3 include the following: • Transporting and Receiving the raw material to the fabrication plant • All relevant production processes in the plant including energy inputs, emissions and the electricity consumptions • Waste processing until end of waste state or disposal of any waste residues during the production of Cofraplus 80 • Production and recycling of packaging • Manufacturing of the Long span decking |
| Technical purpose of product or process | Cofraplus® 80: Cofraplus® 80 is the lightweight and green alternative to concrete precast slabs. It offers economic advantages, optimized logistics and thus provide a solution in a green and environmentally aware package. Proposed with its accessories to facilitate the installation, compatible with all structural materials, Cofraplus® 80 meets the requirements of modern construction projects. Cofraplus® 220: The additive floor Cofraplus® 220 combines the high strength of the patented deep-rolled steel floor decking with that of the reinforced concrete slab. An ease & fast installation, lightness & especially large spans are the characteristics of this process providing great characteristics at freedom for any application. Cofraplus® 80: The nominal thickness of the profiled sheet varies from 0,88 to 1,25 mm. The height is 80 mm. The pitch covering is 270mm, while the covering width is 810mm. Cofraplus 80 is colled formed at the production facility and has a ZM175 coating (175 g/m² total for both sides), which allows the product to be suitable in enviroments with higher levels of corrovisity (C4) due to its 3% magnesium content, it offers self-healing on cut edges and corrosion resistance in chloride and ammonia atmospheres. Cofraplus® 220: The nominal thickness of the profiled sheet varies from 1.13 to 1,25 mm. The height is 220mm. The covering width is 750mm. Cofraplus® 220 is colled formed at the production facility and has a Magnelis® coating ZM175 coating (175 g/m² total for both sides), which allows the product to be suitable in enviroments with higher levels of corrovisity (C4) due to its 3% magnesium content, it offers self-healing on cut edges and corrosion resistance in chloride and ammonia atmospheres. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | 2024-06-24 - 2029-06-24 |
| Technological representativeness | |
| Technology description including background system | ArcelorMittal Construction Cofraplus® 80 and Cofraplus® 220 fulfills the requirement of the harmonized standard of EN 1090, EXC1 - EXC3, and is CE certified (Certification number: 0679-CPR-1020). Performance data of the product in accordance with the declaration of performance EN 14782 with respect to its essential characteristics according to EN 1090. |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-02-10T09:53:17 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | e223e172-2d0c-4669-9dd6-bf319e936e89 |
| Date of last revision | 2024-06-21T10:12:55.5591503Z |
| Data set version | 00.04.000 |
| Registration authority | |
| Registration number | NEPD-6974-6364 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle