Process Data set: NA2XS(FL)2Y 1x1000 RM/35 12/20kV (en)

Process Data set: NA2XS(FL)2Y 1x1000 RM/35 12/20kV (en) en

Process information

Key Data Set Information
Location	CZ
Geographical representativeness description	DACH
Reference year	2025
Name	NA2XS(FL)2Y 1x1000 RM/35 12/20kV
Technical purpose of product or process	Cables in this standard workmanship are destined for fixed installation in the ground, in the air, into building blocks and into pipes made of non-magnetic material. Aluminium conductor Inner semiconducting layer XLPE insulation Outer semiconducting layer Semiconducting water-blocking tape Concentric copper conductor with counterhelix Semiconducting water-blocking tape Al foil PE sheath
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	NKT headquarter Denmark A/S
Quantitative reference
Reference flow(s)	NA2XS(FL)2Y 1x1000 RM/35 12/20kV - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-05-13 - 2030-05-13
Publication date	2025-05-13
Technological representativeness
Technology description including background system	Norm (standard): DIN VDE 0276 Rated voltage Uo/U: 12/20 kV Maximal voltage: 24 kV Maximal operating conductor temperature: 90 °C Maximal short-circuit conductor temperature: 250 °C Test voltage: 42 kV Temperature range: from -35 up to 90 °C Minimal storage temperature: -35 °C Minimal temperature for laying and manipulation: -20 °C Colour of insulation: natural Colour of sheath: black Self-extinguishing of one cable: - Packaging: drum Certificate: VDE, EZÚ, BBJ Declaration of Conformity EU (CE): yes UV stability: yes Declaration of conformity : yes CPR-Classification: Fca RoHS: yes REACH: yes Maximum pulling force: 30 N/mm2

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11036-9982_NA2XS-FL-2Y-1x1000-RM-35-12-20kV.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-08-22T13:38:08
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	e1970710-e715-4a30-b697-41bf1a957e47
Date of last revision	2025-05-12T11:42:57.0760442Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11036-9982
Owner of data set	NKT headquarter Denmark A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	155.1	0.4438	36.21	0.1124	3.839	0.01455	0.05187	0.004798	0.05736	-80.17
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	155.1	0.4438	36.21	0.1124	3.839	0.01455	0.05187	0.004798	0.05736	-80.17
Use of non renewable primary energy (PENRE)	Input	MJ	599.9	31.81	3.405	7.851	12.87	0.07983	3.623	0.1542	0.5345	-191.5
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	66.46	0	0	0	0.0633	0	0	-63.3	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	666.4	31.81	3.405	7.851	12.94	0.07983	3.623	-63.14	0.5345	-191.5
Use of secondary material (SM)	Input	kg	0.5695	0	0	0	0.01139	0	0	0	0	0.09929
Use of renewable secondary fuels (RSF)	Input	MJ	0.8562	0.01574	0.001608	0.00402	0.01758	0.004535	0.001856	0.0001315	0.001192	-0.02015
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.2157	0.05909	0.008497	0.01438	0.00601	0.00001466	0.006635	0	0.002896	-0.5525
Use of net fresh water (FW)	Input	m3	0.9341	0.003319	0.002415	0.0008396	0.01884	0.00003632	0.0003875	0.0004924	0.0006845	-0.3911
Hazardous waste disposed (HWD)	Output	kg	0.3753	0.001629	0.0135	0.0004049	0.009039	0.00000796	0.0001869	0	0.06108	0.05796
Non hazardous waste dispose (NHWD)	Output	kg	11.52	1.472	0.0731	0.3818	0.3058	0.0003358	0.1762	0	1.837	-4.473
Radioactive waste disposed (RWD)	Output	kg	0.002155	0.0002169	0.00001353	0.00005348	0.00004886	3.221E-7	0.00002468	0	0.000003654	-0.0007762
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.001292	0	0.04643	0	0	2.32	0.0000683	-0.003886
Materials for energy recovery (MER)	Output	kg	0	0	0.0274	0	0.01578	0	0	0.7614	0.00000167	-0.0005116
Exported electrical energy (EEE)	Output	MJ	0	0	0.0154	0	0.02959	0	0	1.464	0.0001084	-0.001254
Exported thermal energy (EET)	Output	MJ	0	0	0.2329	0	0.4477	0	0	22.15	0.001639	-0.01897

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	661	31.81	3.403	7.85	14.09	0.07983	3.623	0.1542	0.5345	-191.5
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.001849	0.0000562	0.000002069	0.00001434	0.00003844	4.881E-8	0.000006619	8.515E-8	1.798E-7	-0.0002979
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.6147	0.0095	0.004565	0.001492	0.01262	0.00001705	0.0006887	0.000292	0.0001807	-0.1575
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.4678	0.0008634	0.009979	0.0002149	0.009578	0.00009895	0.00009918	0.00001941	0.000008504	-0.06932
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	47.92	2.123	0.2653	0.5192	1.064	0.00587	0.2396	2.277	0.1034	-15.15
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	48.95	2.125	0.2768	0.5196	1.085	0.005976	0.2398	2.277	0.1034	-15.5
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.5611	0.0008073	0.001528	0.0001848	0.01127	0.000007113	0.00008529	0.000002914	0.000007765	-0.2837
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	48.75	2.125	0.2737	0.5196	1.081	0.006425	0.2398	2.276	0.1066	-14.63
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.004992	0.00001651	0.00001396	0.000004148	0.0001005	8.901E-7	0.000001915	1.831E-7	3.701E-7	-0.0009631
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.05052	0.002011	0.001361	0.0002953	0.00109	0.000002639	0.0001363	0.0001401	0.0001549	-0.01523
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.591	0.02245	0.02173	0.003303	0.01281	0.00004177	0.001524	0.001511	0.0007232	-0.1781
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.192	0.007424	0.003942	0.001265	0.004105	0.000007922	0.0005839	0.000362	0.0002235	-0.05744
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000003545	4.855E-7	5.686E-8	1.176E-7	8.427E-8	2.3E-10	5.428E-8	1.847E-9	6.73E-9	-0.009356
Water (user) deprivation potential (WDP)	m3 world eqv.	1.729E+4	29.54	986.6	7.593	366.5	0.8058	3.505	0.3992	10.6	-8419

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	2.271	0.1389	0.008864	0.03431	0.04913	0	0	0	0	0	0.0002514	0	0	0.01584	0.000269	0.003231	-0.8277
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000003413	1.224E-7	6.301E-8	3.179E-8	7.268E-8	0	0	0	0	0	6.6E-11	0	0	1.467E-8	1.151E-9	3.27E-9	-0.000001204
Potential Soil quality index (SQP)²	unitless	120.5	21.34	163.4	5.491	6.241	0	0	0	0	0	0.01892	0	0	2.534	0.01933	1.298	-20.52
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000006476	2.45E-8	1.356E-8	6.357E-9	1.305E-7	0	0	0	0	0	6.8E-11	0	0	2.934E-9	2.04E-9	7.03E-10	-0.000001077
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.46E-7	0	5.11E-10	0	2.933E-9	0	0	0	0	0	2E-12	0	0	0	5.4E-11	3.5E-11	-4.475E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	3368	23.34	40.44	5.819	81.73	0	0	0	0	0	0.06822	0	0	2.686	0.5855	648.6	-755.8