Process Data set: Hurdal 600 (en) - EPD Global Digi Node

Process Data set: Hurdal 600 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Hurdal 600
Technical purpose of product or process	Hurdal is a highly efficient surface mounted luminaire for a wide variety of applications. It is easily installed directly in the ceiling or on the wall and has cable entrance in both ends in addition to two in the center. The luminaire is IP44 with steel base and aluminium end caps. Hurdal is available in three lengths. Dip switches makes it possible to adjust the light level. System Wattage: 12.0 W. Luminous flux: 1590lm lm. Efficacy: 133 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, L90>50,000. Light distribution: Direct. Control/Dimming: DALI-2. Luminiare class: Class I. Housing: Steel. Optics: UV-stabilized polycarbonate. Height: 76.0mm. Length: 600.0 mm. Width: 72.0 mm. EAN: 7021981131128 The EPD also covers the following products: EAN: 7021981131159 - HURDAL 600 3000K DALI EAN: 7021981131005 - HURDAL 600 3000K EAN: 7021981131036 - HURDAL 600 4000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Hurdal 600 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.147628281881 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-01-13 - 2030-01-13
Publication date	2025-01-13
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/hurdal/113112/pdf/specification_113112.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/703030_Hurdal/50/703030_Hurdal.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8677-8357_Hurdal-600.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-12T11:12:42
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	ddbd2b89-91a5-4699-afc3-cb909b0dc727
Date of last revision	2025-01-10T13:11:16.7600107Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8677-8357
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	17.29	0.004604	0.3344	0.08954	0.001173	1981	0.01073	0.1064	0.04316	-2.741
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	3.623	0	0	0	-3.618	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	20.91	0.004604	0.3344	0.08954	-3.617	1981	0.01073	0.1064	0.04316	-2.741
Use of non renewable primary energy (PENRE)	Input	MJ	142.7	0.4068	4.11	7.882	0.07125	153.2	0.9481	0.7018	0.1807	-9.921
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	7.136	0	0	0	0	0	0	-7.852	0	0.0004917
Total use of non renewable primary energy resource (PENRT)	Input	MJ	149.8	0.4068	4.11	7.882	0.07125	153.2	0.9481	-7.15	0.1807	-9.921
Use of secondary material (SM)	Input	kg	0.5666	0	0	0	0	0	0	0	0.0009146	0.00865
Use of renewable secondary fuels (RSF)	Input	MJ	1.168	0.00009006	0.0001851	0.002893	0.0000389	1.556	0.0002099	0.00206	0.0002412	0.01225
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.9284	0.0007647	0.002018	0.01576	0.0001604	3.876	0.001782	-0.00003115	0.008233	0.2386
Use of net fresh water (FW)	Input	m3	0.1282	0.00004549	0.002563	0.0006875	0.00003361	14.8	0.000106	0.0008998	0.0001633	-0.00847
Hazardous waste disposed (HWD)	Output	kg	0.05923	0.00003676	0.0003425	0.0004002	0	0.09822	0.00008567	0.00001573	0.04722	-0.003923
Non hazardous waste dispose (NHWD)	Output	kg	1.897	0.01953	0.04276	0.2499	0.3148	11.78	0.04551	0.05166	0.2603	-0.2415
Radioactive waste disposed (RWD)	Output	kg	0.0003673	0.00000267	0.000007984	0.00005398	0	0.00137	0.000006222	8.072E-7	4.767E-7	-0.00002201
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.02112	0	0.2928	0	0	0.4368	0.0000122	-0.0003385
Materials for energy recovery (MER)	Output	kg	0	0	0.00199	0	0.01502	0	0	0.1681	2.985E-7	-0.00004454
Exported electrical energy (EEE)	Output	MJ	0	0	0.003058	0	0.01801	0	0	0.2108	0.00001936	-0.0001091
Exported thermal energy (EET)	Output	MJ	0	0	0.04627	0	0.2724	0	0	3.189	0.0002929	-0.001651

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	149.7	0.4068	4.11	7.882	0.07124	153	0.948	0.7016	0.1806	-9.921
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.004084	7.386E-7	0.000001055	0.00001081	1.239E-7	0.0008356	0.000001721	5.289E-7	7.937E-8	-0.0007917
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1094	0.00008237	0.002317	0.008267	0.00002411	0.08756	0.0001919	0.0003195	0.00007074	-0.03979
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.4546	0.00001072	0.00007021	0.0001984	0.5026	0.3098	0.00002499	0.003564	0.001601	-0.001808
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	12.24	0.02754	0.4524	0.557	0.005092	11.21	0.06417	0.4265	0.0288	-0.8825
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	11.82	0.02756	0.4525	0.5572	0.5077	11.56	0.06421	0.4302	0.03048	-0.8859
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.03477	0.00001007	0.00004929	0.000274	0.000001684	0.04623	0.00002346	0.0001045	0.00008099	-0.001602
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	12.36	0.02756	0.4312	0.5572	0.005094	11.54	0.06421	0.4294	0.0312	-1.031
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001503	2.583E-7	0.000008203	0.000003631	4.181E-8	0.0008059	6.019E-7	0.000002914	4.812E-7	-0.0002403
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0143	0.00001622	0.0005399	0.001986	0.000007976	0.009624	0.00003779	0.00008122	0.00003696	-0.002261
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.2073	0.0001813	0.00595	0.02211	0.00008634	0.1253	0.0004226	0.0008817	0.0002005	-0.03024
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.06883	0.00006791	0.002243	0.005993	0.00002482	0.03369	0.0001582	0.0002339	0.00007946	-0.009206
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000004612	5.989E-9	1.663E-8	1.227E-7	1.076E-9	7.684E-7	1.395E-8	1.056E-8	1.465E-9	-0.001461
Water (user) deprivation potential (WDP)	m3 world eqv.	318.5	0.1327	0.3837	5.092	0.09029	2.667E+4	0.3091	4.793	1.63	-0.08568

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.4656	0.001691	0.005936	0.0341	0.0003048	2.775	0	0.00394	0.003309	0.0006202	-0.02546
Potential incidence of disease due to PM emissions (PM)²	disease incidence	7.912E-7	1.776E-9	2.718E-8	2.044E-8	3.57E-10	6.277E-7	0	4.148E-9	2.853E-9	1.244E-9	-1.123E-7
Potential Soil quality index (SQP)²	unitless	45.96	0.2788	0.7998	3.88	0.04779	77.04	0	0.6496	0.2058	0.4712	-7.656
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	6.974E-7	3.17E-10	1.974E-8	4.048E-9	1.19E-10	7.836E-7	0	7.54E-10	3.327E-8	4.28E-10	-1.124E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.379E-8	0	1.24E-10	0	3E-12	3.326E-8	0	0	6.26E-10	4.6E-11	-3.469E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1105	0.3298	10.24	5.419	0.09501	696.9	0	0.7686	2.698	71.23	-303.5