Process information
| Key Data Set Information | |
| Location | DE |
| Geographical representativeness description | The main market is Europe. |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | The scope of this EPD is cradle to gate with options, modules C1-C4 and module D. No actions are necessary during User stage. |
| Technical purpose of product or process | StoColor Dryonic® is a facade paint with Dryonic® Technology, biomimetic principle for dry facades after rain or dew formation which prevents algae and fungal attacks, without the use of biocide film protection. The main components of the product are mineral fillers, a polymer dispersion based binder, pigments, water and small amounts of additives. StoColor Dryonic® can be applied on various substrates by paint brush, by roller, by airless sprayer or by machine. StoColor Dryonic® has the following properties: - biomimetic principle for fastest drying after rain or dew formation - available with X-black Technology: heat shield against solar heating - CO2 diffusion: class C1 in accordance with EN 1062-1 - high level of colour shade variety and stability - minimum extender material breakdown (not easily scuffed) - high level of resistance to mechanical stress - texture-retaining For the use and application of the product the respective national provisions at the place of use apply, in Germany for example the building codes of the federal states and the corresponding national specifications. 1)This product contains substances listed in the candidate list (date: 20.05.2025) exceeding 0.1 percentage by mass: no. 2)This product contains other CMR substances in categories 1A or 1B which are not on the candidate list, exceeding 0.1 percentage by mass: yes. titanium dioxide; pigment; >= 10 - < 20 CAS-nr.: 13463-67-7 3) Biocide products were added to this construction product or it has been treated with biocide products (this then concerns a treated product as defined by the (EU) Ordinance on Biocide Products No.528/2012): yes. 1,2-Benzisothiazol-3(2H)-on; in-can preservative; CAS-nr.: 2634-33-5 Reaction mass of: 5-Chlor-2-methyl-4-isothiazolin-3-on and 2-Methyl-2H;-isothiazol-3-on (3:1);in-can preservative; CAS-nr.: 55965-84-9 The composition of the product is described in the following table: |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-05-22 - 2030-05-22 |
| Technological representativeness | |
| Technology description including background system | The technical data stated here is relevant for the use of the declared product. Further information regarding the technical properties can be found in the Technical Data Sheet on www.sto.de. Performance data of the product with respect to its characteristics in accordance with the relevant technical provision (no CE-marking). |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-08-13T11:44:36 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | dc926675-a83a-4b67-b493-deb23486b8c4 |
| Date of last revision | 2025-05-21T12:33:43.1428134Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-11161-11110 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle