Process information
| Key Data Set Information | |
| Location | NO |
| Geographical representativeness description | Worldwide |
| Reference year | 2024 |
| Name |
|
| Technical purpose of product or process | BUD is the playful chair for the meeting rooms, dining area or as a visual element in informal social zones. BUD was created to give playful and modern environments a chair that differs from the traditional. BUD brings FUN back into zones and spaces where different people come together to create. It has a low back that makes it easy to communicate, while its round and open design makes it stand out in the crowd. With BUD, you get a playful friend who makes it easy to enjoy yourself. The chair is assembled in Ørsta, Norway. Steel parts contains between 15-36% recycled scrap steel Backrest and seat is made of flexible molded polyurethane foam. Cold cured. Plywood’s formaldehyde emission level is significantly below EN 13986 Class E1 and it is complying to EPA TSCA Title VI and CARB Phase 2. Powder coating consists of prime-cured polyester pre-treatment with biological degreasing for high quality adhesion Chair variants: BUD Stack: Four leg stacking w/plastic gliders (stacks 3 chairs, not to be stacked over time) BUD Rotate: Four leg with auto return swivel and plastic glides BUD Unite: Star base with 360 degres swivel, tilt mechanism and wheels with soft rolling BUD Meet: Star base with 360 degres swivel, tilt mechanism and plastic glides |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | "2024-04-30" - "2029-04-30" |
| Technological representativeness | |
| Technology description including background system | Width 68cm Height 77cm Depth 58cm Seat height 48 cm Weight 7,81 kg The seating furniture is tested and meets the requirements for strength and safety according to: EN 16139:2013 / EN 1022:2023 / EN 16139:2013 Test level 1 |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-09-28T19:28:52 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | d36686b4-1323-4a7b-ab81-54cae3320cab |
| Date of last revision | 2024-04-24T07:33:47.1158448Z |
| Data set version | 00.06.000 |
| Registration authority | |
| Registration number | NEPD-6491-5680 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle