Process Data set: ArcelorMittal Construction organic coated low profiles (en) en
Process information
| Key Data Set Information | |
| Location | SE |
| Geographical representativeness description | The main market areas are the Nordic countries. |
| Reference year | 2024 |
| Name |
|
| Use advice for data set | Type of EPD: cradle to gate - with options. All relevant life cycle stages are covered. Modules A1-A5, C2-C4 and module D were considered. The product stages A1-A3 include the following: • Transporting and Receiving the raw material to the fabrication plant • All relevant production processes in the plant including energy inputs, emissions and the electricity consumptions • Waste processing until end of waste state or disposal of any waste residues during the production of the low profile • Production and recycling of packaging • Manufacturing of the low profile |
| Technical purpose of product or process | This Environmental Product Declaration refers to organic coated steel profile produced by ArcelorMittal Construction Sweden. These products are made of cold-rolled steel profiles for roof, wall, facades and floors applications. The targeted applications are as follow: - Roof & Decking - Traditional wall - Facade architectural - Sidings - Cassettes - Wall liner trays - Floors These profiles are available in different thicknesses from 0.5 to 1.25 mm. They can be covered with different metallic coating with masses from 60 to 350 g/m². They are also constituted of an organic coating with thicknesses from 12 to 205 µm. This EPD covers the following organic coated steel profiles produced by ArcelorMittal Construction Sweden: - AM Galant 510, TP16, TP17, TP20 LS, TP20 OL, TP32, TP32R, TP45, Sinus 27 T, VP16, VP16v, VP17, VP20 LS, VP32, VP45, Sinus 27 V, Ambassador, Solstad, Original, Cofraplus 45 The steel grade used for these organic coated steel profiles varies from S280 to 350GD, Z275 or equivalent in Zinc Magnesium (ZM) with an organic coated surface. Type of coating surface and the required nominal thickness of the steel sheet is depending on the specific application and environmental conditions. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | 2024-01-25 - 2029-01-25 |
| Technological representativeness | |
| Technology description including background system | ArcelorMittal Construction organic coated low profiles fulfill the requirement of the harmonized standard of EN 1090 and all products are CE certified. Performance data of the product in accordance with the declaration of performance EN 14782 with respect to its essential characteristics according to EN 1090. |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-02-10T09:50:37 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | d2933c28-c4df-43a5-bb5d-884caff9d2fa |
| Date of last revision | 2023-10-26T13:28:15.8855224Z |
| Data set version | 00.05.000 |
| Registration authority | |
| Registration number | NEPD-5885-4611 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle