Process Data set: Lamp socket 5-pole (en)

Process Data set: Lamp socket 5-pole (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe.
Reference year	2025
Name	Lamp socket 5-pole
Technical purpose of product or process	The lamp socket is equipped with screw terminals for 5 poles marked with N-L-Earth-M1-M2. All screw terminals are insulated against accidental contact. It can be used for both residential, office, and other common installations. 100% compatible with both new and old boxes and frames. Quick installation with fixation in the box via clips that do not fall off unless intended, as well as Torx 10 screws for the box. The front plastic is included and made of color-resistant and antibacterial plastic that does not fade in color and helps keep touch surfaces clean and free of bacteria. Voltage: 250V. Current: 16A. IP Class: IP20. Material: Anti-bacterial UV Resistant PC. Colour: White RAL 9016. Indoor. Length (mm): 45. Width (mm): 45. Height (mm): 30. EAN: 7021985800013. The EPD also covers the following products: EAN: 7021985800112 LAMPEUDTAG 5-POLET 1M ANTRACIT EAN: 7021985300018 LAMPEUDTAG +S 5-POLET 1M HVID EAN: 7021985300117 LAMPEUDTAG +S 5-POLET 1M ANTRACIT EAN: 7021985801010 LAMPEUDTAG Ø83 5-POLET 16A HVID EAN: 7021985801119 LAMPEUDTAG Ø83 5-POLET 16A ANTRACIT
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Lamp socket 5-pole - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.028947409406 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-01-23 - 2030-01-23
Publication date	2025-01-23
Technological representativeness
Technology description including background system	Declaration data: Standards: EN 60884-1:2013 (applies to plugs and fixed or portable socket-outlets for AC only, with or without earthing contact for household and similar purposes, either indoors or outdoors) Link to product data on our website: https://www.sg-as.com/da/produkter/lampeudtag/7021985800013/pdf/specifikation_7021985800013.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

PCR EPD Italy 012 - Electronic and electrical products and systems - Switches

Data sources, treatment and representativeness

Documentation of data quality management

PCR EPD Italy 012 - Electronic and electrical products and systems - Switches

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8788-8450_Lamp-socket-5-pole.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-11T09:18:44
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	cfee39a5-20d0-4316-ba5f-5f69106077cf
Date of last revision	2025-01-20T08:26:15.9541716Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8788-8450
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	1.188	0.0001315	0.2114	0.007786	0.0002325	0.001155	0.0001739	0.0005267	-0.1741
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.3999	0	0	0	-0.3999	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	1.588	0.0001315	0.2114	0.007786	-0.3997	0.001155	0.0001739	0.0005267	-0.1741
Use of non renewable primary energy (PENRE)	Input	MJ	3.491	0.01162	2.084	0.6872	0.01413	0.08069	0.003125	0.005247	-0.108
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	0.49	0	0	0	0	0	-0.49	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	3.981	0.01162	2.084	0.6872	0.01413	0.08069	-0.4868	0.005247	-0.108
Use of secondary material (SM)	Input	kg	0.07982	0	0	0	0	0	0	0	0.001768
Use of renewable secondary fuels (RSF)	Input	MJ	0.004512	0.000002572	0.0001018	0.0002513	0.000007712	0.00004132	0.000003735	0.00001092	0.00002207
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.002626	0.00002184	0.001225	0.001375	0.00003179	0.0001477	0	0.000004641	-0.009978
Use of net fresh water (FW)	Input	m3	0.003737	0.000001299	0.001968	0.00005978	0.000006664	0.000008629	0.00002642	0.000006733	-0.0004145
Hazardous waste disposed (HWD)	Output	kg	0.001793	0.00000105	0.0003602	0.00003485	0	0.000004161	0	0.0003524	-0.0001034
Non hazardous waste dispose (NHWD)	Output	kg	0.04922	0.0005576	0.02512	0.02166	0.06241	0.003924	0	0.01891	-0.004269
Radioactive waste disposed (RWD)	Output	kg	0.000006744	7.624E-8	0.00000132	0.000004706	0	5.496E-7	0	3.579E-8	-3.298E-7
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.03761	0	0.05805	0	0.01814	8.611E-7	-0.0001143
Materials for energy recovery (MER)	Output	kg	0	0	0.007074	0	0.0002945	0	0.0096	2.106E-8	-0.00001467
Exported electrical energy (EEE)	Output	MJ	0	0	0.01074	0	0.00357	0	0.01475	0.000001366	-0.00005216
Exported thermal energy (EET)	Output	MJ	0	0	0.1625	0	0.05401	0	0.2231	0.00002067	-0.0007892

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	3.98	0.01162	2.084	0.6871	0.01412	0.08068	0.003124	0.005247	-0.108
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00008861	2.109E-8	6.392E-7	9.393E-7	2.457E-8	1.474E-7	2.485E-9	1.732E-9	-0.00002709
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.009912	0.000002352	0.00124	0.0007271	0.000004781	0.00001534	0.00000498	0.000001767	-0.001487
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.09716	3.062E-7	0.0000723	0.00001728	0.106	0.000002209	4.937E-7	9.818E-8	-0.00005362
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	0.3322	0.0007862	0.251	0.04859	0.00101	0.005336	0.02273	0.001229	-0.01004
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.2357	0.0007868	0.2511	0.04861	0.107	0.00534	0.02273	0.001229	-0.01016
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0006376	2.875E-7	0.00003043	0.00002397	3.339E-7	0.000001899	9.211E-8	7.271E-8	-0.00006669
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.3412	0.0007868	0.2375	0.04861	0.00101	0.00534	0.02273	0.001283	-0.005487
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.00009327	7.375E-9	0.00000515	3.16E-7	8.29E-9	4.263E-8	4.381E-9	3.381E-9	-0.00001044
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0005544	4.631E-7	0.0002543	0.0001747	0.000001581	0.000003035	0.000002382	0.000001773	-0.00006611
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.006969	0.000005178	0.0028	0.001945	0.00001712	0.00003394	0.00002441	0.000007088	-0.001004
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.002095	0.000001939	0.0007266	0.000527	0.000004921	0.000013	0.000005887	0.000002245	-0.0002672
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	1.725E-8	1.71E-10	2.151E-9	1.07E-8	2.13E-10	1.209E-9	5E-11	6.5E-11	-0.0001157
Water (user) deprivation potential (WDP)	m3 world eqv.	1.064	0.003788	0.2009	0.442	0.0179	0.07804	0.02254	0.09729	-0.032

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.007057	0.00004828	0.001497	0.002973	0.00006043	0	0.0003527	0.000007858	0.00003103	-0.0003939
Potential incidence of disease due to PM emissions (PM)²	disease incidence	3.249E-8	5.1E-11	1.669E-8	1.771E-9	7.1E-11	0	3.27E-10	2.2E-11	3.3E-11	-3.657E-9
Potential Soil quality index (SQP)²	unitless	2.523	0.007959	0.4471	0.3367	0.009475	0	0.05644	0.0005703	0.01363	-0.324
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	1.432E-7	7E-12	2.669E-9	3.51E-10	2.3E-11	0	6.5E-11	5.9E-11	5E-12	-1.699E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.807E-9	0	6E-11	0	1E-12	0	0	1E-12	0	-1.89E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	88.36	0.009417	6.26	0.472	0.01884	0	0.05981	0.04802	5.673	-13.81