Process Data set: Front mount box airtight (en)

Process Data set: Front mount box airtight (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe.
Reference year	2025
Name	Front mount box airtight
Technical purpose of product or process	Box for installation in plaster/fermacell and other types of cavity walls and ceilings. The boxes can be installed with DESIGN+C frames. The boxes can be installed in wall thicknesses from 9 to 40 mm via the attached claw pieces. A 57 mm hole saw must be used. Auxiliary tools for mounting the SG Install front box are used. The boxes are windproof IP40. All SG install units can be installed in the boxes, and are 100% compatible with all inserts from LK Fuga installation equipment. IP Class: IP40. Material: PP/TPV. Colour: Grey. Modul: 2.5M. Length (mm): 134. Width (mm): 56. Height (mm): 50. EAN: 7021985939812. The EPD also covers the following products: EAN: 7021985939515 - FRONT MOUNT BOX AIRTIGHT 1M EAN: 7021985939614 - FRONT MOUNT BOX AIRTIGHT 1.5M EAN: 7021985939713 - FRONT MOUNT BOX AIRTIGHT 2M
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Front mount box airtight - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.004490740741 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-04-11 - 2030-04-11
Publication date	2025-04-11
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/da/produkter/forfradaser/7021985939812/pdf/specifikation_7021985939812.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

PCR EPD Italy 007 - Electronic and electrical products and systems - Other electronics

Data sources, treatment and representativeness

Documentation of data quality management

PCR EPD Italy 007 - Electronic and electrical products and systems - Other electronics

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-9747-9685_Front-mount-box-airtight.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-05-19T10:20:14
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	cefc6cff-70f5-4a22-a43c-746b6a7e1d40
Date of last revision	2025-04-10T15:08:06.3943996Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-9747-9685
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	0.2918	0.001786	0.1148	0.004225	0.00003614	0.0006268	0.00008998	0.0002575	-0.2177
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.05674	0	0	0	-0.05674	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	0.3486	0.001786	0.1148	0.004225	-0.05671	0.0006268	0.00008998	0.0002575	-0.2177
Use of non renewable primary energy (PENRE)	Input	MJ	2.329	0.1578	1.131	0.3729	0.002195	0.04379	0.002963	0.004626	0.06621
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	1.407	0	0	0	0	0	-1.407	0	0.07035
Total use of non renewable primary energy resource (PENRT)	Input	MJ	3.736	0.1578	1.131	0.3729	0.002195	0.04379	-1.404	0.004626	0.1366
Use of secondary material (SM)	Input	kg	0.02693	0	0	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.00004338	0.00003494	0.00005524	0.0001364	0.000001199	0.00002243	0.000002476	0.000005398	0.00002993
Use of non renewable secondary fuels (NRSF)	Input	MJ	0	0.0002967	0.0006648	0.0007464	0.000004941	0.00008018	0	0.00006752	-0.01458
Use of net fresh water (FW)	Input	m3	0.001541	0.00001765	0.001068	0.00003244	0.000001036	0.000004683	0.000008182	0.000005709	-0.0002185
Hazardous waste disposed (HWD)	Output	kg	0.0006117	0.00001426	0.0001955	0.00001891	0	0.000002258	0	0.0004814	0.000008261
Non hazardous waste dispose (NHWD)	Output	kg	0.01579	0.007576	0.01363	0.01175	0.0097	0.00213	0	0.01874	-0.0001325
Radioactive waste disposed (RWD)	Output	kg	0.000003977	0.000001036	7.163E-7	0.000002554	0	2.983E-7	0	3.054E-8	-1.259E-7
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.02041	0	0.009023	0	0.01378	0.00000154	0.000001195
Materials for energy recovery (MER)	Output	kg	0	0	0.003839	0	1.321E-8	0	0.01717	3.766E-8	0.000005174
Exported electrical energy (EEE)	Output	MJ	0	0	0.005827	0	0.0005548	0	0.02795	0.000002443	0.000009034
Exported thermal energy (EET)	Output	MJ	0	0	0.08816	0	0.008394	0	0.4228	0.00003697	0.0001367

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	3.736	0.1578	1.131	0.3729	0.002195	0.04379	0.002963	0.004626	0.1305
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.000001689	2.865E-7	3.469E-7	5.098E-7	3.819E-9	8E-8	1.604E-9	1.594E-9	3.652E-8
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.0007873	0.00003195	0.0006729	0.0003946	7.431E-7	0.000008323	0.000005515	0.000001572	0.000001272
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.01376	0.00000416	0.00003924	0.000009379	0.01647	0.000001199	3.612E-7	1.897E-7	0.00001486
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	0.1762	0.01068	0.1362	0.02637	0.0001569	0.002896	0.04374	0.002007	0.00319
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.1626	0.01069	0.1363	0.02638	0.01662	0.002898	0.04374	0.002008	0.00312
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0002063	0.000003906	0.00001651	0.00001301	5.19E-8	0.000001031	5.521E-8	4.979E-8	-0.00008443
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.1789	0.01069	0.1289	0.02638	0.000157	0.002898	0.04374	0.002012	0.003592
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.000006144	1.002E-7	0.000002795	1.715E-7	1.288E-9	2.314E-8	3.672E-9	2.484E-9	-7.416E-8
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0001487	0.000006292	0.000138	0.00009482	2.458E-7	0.000001647	0.000002638	0.000002598	-0.0000028
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.001601	0.00007035	0.001519	0.001056	0.000002661	0.00001842	0.00002853	0.000006221	-0.00003048
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.0005384	0.00002634	0.0003944	0.000286	7.648E-7	0.000007057	0.000006862	0.000002185	1.408E-7
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	8.891E-9	2.323E-9	1.168E-9	5.806E-9	3.3E-11	6.56E-10	3.4E-11	6.2E-11	-0.0001821
Water (user) deprivation potential (WDP)	m3 world eqv.	0.7823	0.05147	0.109	0.2399	0.002782	0.04235	0.006892	0.0471	-0.3934

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.004557	0.000656	0.0008123	0.001613	0.000009392	0	0.0001914	0.00000516	0.00002313	-0.0001576
Potential incidence of disease due to PM emissions (PM)²	disease incidence	7.63E-9	6.9E-10	9.058E-9	9.61E-10	1.1E-11	0	1.77E-10	2.6E-11	3.1E-11	-1E-9
Potential Soil quality index (SQP)²	unitless	0.6714	0.1081	0.2427	0.1827	0.001473	0	0.03063	0.0003739	0.01638	-0.2341
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	3.845E-9	1.26E-10	1.448E-9	1.9E-10	4E-12	0	3.5E-11	3.6E-11	4E-12	-3.09E-10
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.6E-10	0	3.4E-11	0	0	0	0	1E-12	0	5E-12
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	5.057	0.1279	3.397	0.2561	0.002927	0	0.03246	0.008766	0.81	-0.09489