Process information
| Key Data Set Information | |
| Location | NO |
| Geographical representativeness description | Global maritime market |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | This EPD covers the life cycle modules A1–A3 (raw material extraction, transport to factory, and production), module A4 (transport to storage and further to Norwegian port). In addition it includes module A5 (waste treatment of packaging), module C3 (product waste processing/biogenic carbon) and module D (reuse, recovery, recycling of potential of waste). In cases where the product does not contain biogenic carbon, the data in module C3 will be zero. The system boundaries are defined according to EN 15804+A2. |
| Technical purpose of product or process | Unitor Enviroclean is a heavy-duty, highly concentrated microemulsion water-based cleaner formulated for marine applications. The product uses a blend of surfactants and other organic components and is designed to provide effective cleaning and degreasing performance in demanding environments such as engine rooms and on decks. • Highly concentrated, enabling efficient cleaning and economical in-use dosage. • Low toxicity and biodegradable; see the safety data sheet for detailed safety and environmental information. • Supports a good working environment when used as directed and is designed for compatibility with marine oily water separators, provided these are operated in accordance with MARPOL and local discharge requirements. • Primary applications include engine room and deck cleaning, along with the removal of grease, oil, sludge, polymer compounds, carbon deposits, dirt and grime in marine environments. |
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Technological representativeness | |
| Technology description including background system | Appearance: Pale yellow to orange liquid Density: 1,01 - 1,02 g/cm3 pH: 10,0 - 11,0 |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-12-05T16:09:08 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | c39f560a-7517-44dc-8fe6-ebec4361eb90 |
| Date of last revision | 2025-11-25T11:31:46.6862716Z |
| Data set version | 00.03.001 |
| Registration authority | |
| Registration number | NEPD-14367-14573 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle