Process Data set: Zip Pro 3-T Dali (en)

Process Data set: Zip Pro 3-T Dali (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Zip Pro 3-T Dali
Technical purpose of product or process	DALI three-phase rail spot with integrated powerful LED chip and driver. Mounted using DALI global multi-adapter, which is ideal for SG’s DALI three-phase rail system (Shopline DALI) as well as other systems where Global DALI can be used.Zip Pro DALI is made of powder-coated aluminium, flexible and able to be pointed in almost all directions, making it the obvious choice for shops and exhibitions. System Wattage: 40.0 W. Luminous flux: 3470lm. Efficacy: 87 lm/W. Colour temperature: 3000K. Colour rendering: Ra>90. MacAdams factor: SDCM: 2. Lifetime: L90/B10>100,000, . Light distribution: Direct. Control/Dimming: DALI-2. Luminiare class: Class I. Housing: Aluminium. Optics: Tempered glass. Height: 148.0mm. Length: 218.0 mm. Width: 100.0 mm. EAN: 7021983207302 The EPD also covers the following products: EAN: 7021983207319 - ZIP PRO 3-T WHITE 4000K DALI EAN: 7021983207326 - ZIP PRO 3-T BLACK 3000K DALI EAN: 7021983207333 - ZIP PRO 3-T BLACK 4000K DALI Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Zip Pro 3-T Dali - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.151080974855 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-06-24 - 2030-06-24
Publication date	2025-06-24
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/zip-pro-dali/320730/pdf/specification_320730.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/702765_Zip%20Pro%20DALI/50/702765_Zip%20Pro.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11531-11449_Zip-Pro-3-T-Dali.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-09-09T13:59:45
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	bc6e06b5-7fc7-458b-84bd-b24d7b7debe7
Date of last revision	2025-06-23T09:00:11.4000366Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11531-11449
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	31.91	0.002197	0.6075	0.1032	0.001215	4.26E+3	0.01299	0.07828	0.06453	-1.189
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	1.946	0	0	0	-1.946	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	33.85	0.002197	0.6075	0.1032	-1.945	4.26E+3	0.01299	0.07828	0.06453	-1.189
Use of non renewable primary energy (PENRE)	Input	MJ	232.9	0.1941	6.058	9.084	0.07384	329.4	1.148	0.5714	0.251	-11.88
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	2.446	0	0	0	0	0	0	-3.917	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	235.4	0.1941	6.058	9.084	0.07384	329.4	1.148	-3.346	0.251	-11.88
Use of secondary material (SM)	Input	kg	1.089	0	0	0	0	0	0	0	0.001324	0.001827
Use of renewable secondary fuels (RSF)	Input	MJ	0.3344	0.00004297	0.0005259	0.003401	0.00004031	3.346	0.0002541	0.00126	0.0003972	0.0002896
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.03034	0.0003649	0.004974	0.01822	0.0001662	8.335	0.002158	-0.00006198	0.01147	-0.03485
Use of net fresh water (FW)	Input	m3	0.1918	0.00002171	0.01594	0.000781	0.00003484	31.82	0.0001284	0.0004789	0.0002167	-0.007001
Hazardous waste disposed (HWD)	Output	kg	0.1345	0.00001754	0.0008297	0.000443	0	0.2112	0.0001037	0.00003058	0.07234	-0.004301
Non hazardous waste dispose (NHWD)	Output	kg	2.579	0.009319	0.05666	0.2805	0.3262	25.34	0.0551	0.04129	0.3413	-0.1348
Radioactive waste disposed (RWD)	Output	kg	0.0005956	0.000001274	0.000004751	0.00006234	0	0.002946	0.000007533	0.000001519	7.329E-7	-0.00003652
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.03926	0	0.3035	0	0	0.7013	0.000003121	-0.00007151
Materials for energy recovery (MER)	Output	kg	0	0	0.006439	0	0.000315	0	0	0.03479	7.632E-8	-0.000009416
Exported electrical energy (EEE)	Output	MJ	0	0	0.005973	0	0.01866	0	0	0.05346	0.000004951	-0.00002307
Exported thermal energy (EET)	Output	MJ	0	0	0.09036	0	0.2823	0	0	0.8088	0.00007491	-0.000349

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	235.3	0.1941	6.058	9.084	0.07383	328.9	1.148	0.5713	0.2508	-11.88
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.007087	3.525E-7	0.000002104	0.00001226	1.285E-7	0.001797	0.000002084	4.758E-7	1.11E-7	-0.001546
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1481	0.0000393	0.003573	0.009916	0.00002499	0.1883	0.0002324	0.0002433	0.00009726	-0.06483
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.4369	0.000005116	0.001045	0.0002281	0.5531	0.6662	0.00003025	0.0001049	0.00001238	-0.002389
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	20.29	0.01314	0.6777	0.6432	0.005278	24.1	0.07769	0.1421	0.02132	-0.9033
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	19.9	0.01315	0.6789	0.6435	0.5584	24.86	0.07775	0.1424	0.02145	-0.9048
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.04313	0.000004804	0.0001067	0.0003203	0.000001745	0.09941	0.0000284	0.0001231	0.0001172	0.0008676
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	20.45	0.01315	0.6409	0.6435	0.005279	24.81	0.07774	0.1424	0.02145	-0.9075
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0019	1.233E-7	0.00001513	0.000004105	4.333E-8	0.001733	7.287E-7	0.00000173	6.639E-7	-0.0003557
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02324	0.000007739	0.0007401	0.002386	0.000008266	0.0207	0.00004576	0.00004972	0.00002941	-0.003238
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.2633	0.00008653	0.008147	0.02657	0.00008948	0.2694	0.0005116	0.0005531	0.0002775	-0.0449
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.08495	0.0000324	0.00216	0.007179	0.00002572	0.07244	0.0001916	0.0001541	0.0001069	-0.01271
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000008168	2.857E-9	1.02E-8	1.417E-7	1.113E-9	0.000001652	1.689E-8	3.917E-9	1.978E-9	-0.0004609
Water (user) deprivation potential (WDP)	m3 world eqv.	903	0.0633	0.9724	6.016	0.09357	1283	0.3743	5.961	2.693	45.76

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.7364	0.0008068	0.005284	0.03938	0.0003159	5.968	0	0.004771	0.002931	0.0009102	-0.04288
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.00000119	8.47E-10	4.818E-8	2.274E-8	3.68E-10	0.00000135	0	5.023E-9	1.623E-9	1.748E-9	-1.241E-7
Potential Soil quality index (SQP)²	unitless	73.83	0.133	1.285	4.383	0.04953	165.7	0	0.7865	0.1476	0.5688	-10.47
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	7.797E-7	1.54E-10	8.662E-9	4.536E-9	1.24E-10	0.000001685	0	9.13E-10	6.119E-8	5.6E-10	-1.536E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.398E-8	0	1.92E-10	0	2E-12	7.153E-8	0	0	1.041E-9	6.6E-11	-1.881E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1228	0.1574	17.72	6.189	0.09846	1499	0	0.9305	1.209	182.3	-464.5