Process Data set: StoCryl V 100 (en)

Process Data set: StoCryl V 100 (en) en

Process information

Key Data Set Information
Location	DE
Geographical representativeness description	The main market for StoCryl V 100 is Europe.
Reference year	2025
Name	StoCryl V 100
Use advice for data set	The scope of this EPD is cradle to gate with options, modules C1-C4 and module D. No actions are necessary during User stage.
Technical purpose of product or process	StoCryl V 100 is a rigid coating for the protection and coloured decoration of concrete structures (concrete and reinforced concrete). It has a mid sheen (G2) appearance in accordance with EN 1062-1. The main components of the product are mineral fillers, an acrylic dispersion based binder, water, pigments, solvent and small amount of additives. StoCryl V 100 can be used for the coloured decoration of concrete areas as part of the StoCretec concrete repair system in building structures or as a part of the surface protection systems in accordance with EN 1504-2. The product is ready to use after stirring and can be applied manually with a paint brush or roller or by machine. For the use and application of the product the respective national provisions at the place of use apply, in Germany for example the building codes of the federal states and the corresponding national specifications. The following data is required by the corresponding PCR B. Further information can be found on the Safety Data Sheet on www.sto.de. 1) This product contains substances listed in the candidate list (date: 28.07.2025) exceeding 0.1 percentage by mass: no. 2) This product contains other CMR substances in categories 1A or 1B which are not on the candidate list, exceeding 0.1 percentage by mass: yes titanium dioxide, pigment, >= 10 - < 20 CAS-nr: 13463-67-7 3) Biocide products were added to this construction product or it has been treated with biocide products (this then concerns a treated product as defined by the (EU) Ordinance on Biocide Products No. 528/2012): yes 1,2-Benzisothiazol-3(2H)-on; in-can preservative; CAS-nr: 2634-33-5 reaction mass of 5-Chlor-2-methyl-4-isothiazolin-3-on and 2-Methyl-2Hisothiazol-3-on (3:1) in-can preservative; CAS-nr: 55965-84-9 The composition of the product is as stated in the following table:
Classification	Class name : Hierarchy level EPDNorge: Construction / Paint
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Sto SE & Co. KGaA
Quantitative reference
Reference flow(s)	StoCryl V 100 - 1.0 * 1.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-09-16 - 2030-09-16
Publication date	2025-09-16
Technological representativeness
Technology description including background system	The technical data stated here is relevant for the use of the declared product. Further information regarding the technical properties can be found in the Technical Data Sheet on www.sto.de.

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR Part B for coatings with organic binders

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR Part B for coatings with organic binders

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-12334-12390_StoCryl-V-100.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-10-24T15:57:51
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	bbb95c04-2cba-460c-af35-d67146e450a6
Date of last revision	2025-09-12T06:45:17.4362855Z
Data set version	00.02.001
Registration authority	EPD Norway
Registration number	NEPD-12334-12390
Owner of data set	Sto SE & Co. KGaA
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	1.414	0.06714	0.0856	0.003772	0.04806	0.001989	0.003772	0.008082	-0.01419
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.694	0	0	0	-0.6711	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	2.108	0.06714	0.0856	0.003772	-0.6231	0.001989	0.003772	0.008082	-0.01419
Use of non renewable primary energy (PENRE)	Input	MJ	36.35	3.542	0.06183	0.2635	1.212	0.3678	0.2635	0.2257	-0.002298
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	0.722	0	0	0	-0.7003	0	0	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	37.07	3.542	0.06183	0.2635	0.5121	0.3678	0.2635	0.2257	-0.002298
Use of secondary material (SM)	Input	kg	0.0001778	0	0	0	0.000005335	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.004581	0.003412	0.00001797	0.000135	0.0002488	0.00004894	0.000135	0.0001677	-0.000002486
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.0008756	0.003874	0.00002379	0.0004825	0.0001719	0.0007201	0.0004825	0.0003621	-0.0008414
Use of net fresh water (FW)	Input	m3	0.1781	0.0004223	0.0006656	0.00002818	0.005379	0.00001893	0.00002818	0.0002777	-0.00001709
Hazardous waste disposed (HWD)	Output	kg	0.01233	0.0001974	0.001041	0.00001359	0.0004073	0.00001083	0.00001359	0	-1.08E-7
Non hazardous waste dispose (NHWD)	Output	kg	0.8882	0.05737	0.001553	0.01282	0.04828	0.0004354	0.01282	1	-0.00005429
Radioactive waste disposed (RWD)	Output	kg	0.00007164	0.00002415	5.928E-8	0.000001795	0.000002927	0.000002554	0.000001795	0	-1.203E-8
Components for re-use (CRU)	Output	kg	0	0	0	0	0.0475	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.0006193	0	0.008698	0	0	0	0
Materials for energy recovery (MER)	Output	kg	0	0	0.004805	0	0.002624	0	0	0	0
Exported electrical energy (EEE)	Output	MJ	0	0	0.00293	0	0.00192	0	0	0	0
Exported thermal energy (EET)	Output	MJ	0	0	0.04433	0	0.02905	0	0	0	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	34.02	3.541	0.06183	0.2635	1.143	0.3678	0.2635	0.2257	-0.002298
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.000009403	0.000003116	4.101E-8	4.814E-7	3.989E-7	4.1E-8	4.814E-7	7.388E-8	-1.598E-9
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.01465	0.00588	0.000008121	0.00005009	0.0006198	0.0002795	0.00005009	0.00007296	-0.000001324
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.07313	0.0001467	0.0007167	0.000007214	0.0734	0.00000501	0.000007214	0.000009577	-3.318E-7
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	2.066	0.2607	0.006569	0.01743	0.07192	0.02672	0.01743	0.008204	-0.0001607
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	1.993	0.261	0.008162	0.01744	0.1454	0.02673	0.01744	0.008215	-0.0001665
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.00004725	0.0001632	0.0008757	0.000006203	0.00003291	0.000002106	0.000006203	0.000002016	-0.000005535
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	2.066	0.261	0.008005	0.01744	0.07197	0.02673	0.01744	0.008206	-0.0001641
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.000482	0.000002476	3.649E-8	1.392E-7	0.00001454	9.728E-8	1.392E-7	9.298E-8	-1.428E-8
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.002048	0.001484	0.000002768	0.000009911	0.0001081	0.0001234	0.000009911	0.00002711	-4.328E-7
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.0212	0.0165	0.00002088	0.0001109	0.001143	0.001354	0.0001109	0.0002991	-0.000004679
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.00753	0.00433	0.00000647	0.00004247	0.0003598	0.0003722	0.00004247	0.00008564	-0.000001291
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	2.393E-7	5.158E-8	5.58E-10	3.948E-9	8.949E-9	5.771E-9	3.948E-9	3.105E-9	-0.00001171
Water (user) deprivation potential (WDP)	m3 world eqv.	11.48	3.897	7.59	0.2549	0.7175	0.07813	0.2549	1.392	-0.02861

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	253.5	0.01589	0.0000429	0.001152	7.605	0.001576	0.001152	0	0.00103	-0.00001468
Potential incidence of disease due to PM emissions (PM)²	disease incidence	2.243E-7	1.11E-8	5.4E-11	1.067E-9	7.133E-9	7.394E-9	1.067E-9	0	1.557E-9	-8.1E-11
Potential Soil quality index (SQP)²	unitless	6.784	1.255	-0.01944	0.1843	0.2615	0.04667	0.1843	0	0.869	-0.01536
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	5.073E-7	2.958E-9	6.2E-11	2.13E-10	1.533E-8	1.85E-10	2.13E-10	0	8.9E-11	-1.2E-11
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	8.749E-9	0	2E-12	0	2.63E-10	8E-12	0	0	5E-12	0
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	15.1	2.401	0.04427	0.1953	0.5383	0.201	0.1953	0	0.1232	-0.0125