Process Data set: Rax Soft 200 2200 RA>90 (en)

Process Data set: Rax Soft 200 2200 RA>90 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Rax Soft 200 2200 RA>90
Technical purpose of product or process	Rax Soft 200 is a high-performance downlight for lighting in public buildings, offices, corridors etc with an excellent light control by a combination of optimized lens and reflector optics. Available with satin matt reflector for high efficiency. Rax Soft 200 is installed easily with springs that fit ceiling panels with a thickness of 1–50 mm. System Wattage: 22.0 W. Luminous flux: 2160lm. Efficacy: 98 lm/W. Colour temperature: 3000K. Colour rendering: Ra>90. MacAdams factor: SDCM: 2. Lifetime: L90/B10>100,000, . Light distribution: Direct. Control/Dimming: Trailing edge dimming. Luminiare class: Class II SELV. Housing: Flame retardant polycarbonate. Optics: Polycarbonat (PC). Height: 93.0mm. Diameter: 216,0mm. Cut-out: 200,0mm. EAN: 7021982125201 The EPD also covers the following products: EAN: 7021982125720 - RAX SOFT 200 SATIN 2200 4000K RA>90 EAN: 7021982126000 - RAX SOFT 200 BLACK 2200 4000K RA>90 Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Rax Soft 200 2200 RA>90 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.117263277437 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-02-04 - 2030-02-04
Publication date	2025-02-04
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/rax-soft-200/212520/pdf/specification_212520.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/701462_Rax%20Soft%20200/50/701462_Rax%20Soft%20200.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8948-8610_Rax-Soft-200-2200-RA-90.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-10T14:31:01
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	b3d28caa-3179-419f-8604-81f0facba24e
Date of last revision	2025-01-31T14:10:04.5196541Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8948-8610
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	20.34	0.001251	0.424	0.08354	0.0009433	3.13E+3	0.01052	0.05898	0.04165	-2.922
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	1.52	0	0	0	-1.52	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	21.86	0.001251	0.424	0.08354	-1.519	3.13E+3	0.01052	0.05898	0.04165	-2.922
Use of non renewable primary energy (PENRE)	Input	MJ	172.8	0.1105	4.213	7.353	0.0573	242	0.9291	0.4739	0.1878	-7.829
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	10.9	0	0	0	0	0	0	-11.85	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	183.7	0.1105	4.213	7.353	0.0573	242	0.9291	-11.38	0.1878	-7.829
Use of secondary material (SM)	Input	kg	0.6759	0	0	0	0	0	0	0	0.0008617	0.002018
Use of renewable secondary fuels (RSF)	Input	MJ	0.2297	0.00002447	0.0003727	0.002753	0.00003129	2.458	0.0002057	0.001013	0.0002512	-0.0004583
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.0241	0.0002078	0.003509	0.01475	0.000129	6.123	0.001746	-0.00004035	0.007553	-0.1628
Use of net fresh water (FW)	Input	m3	0.1419	0.00001236	0.01149	0.0006322	0.00002704	23.38	0.0001039	0.0008375	0.0001706	-0.006974
Hazardous waste disposed (HWD)	Output	kg	0.07546	0.000009988	0.000582	0.0003586	0	0.1552	0.00008396	0.00001991	0.04542	-0.002804
Non hazardous waste dispose (NHWD)	Output	kg	1.58	0.005306	0.03936	0.227	0.2532	18.62	0.0446	0.02688	0.3495	-0.09032
Radioactive waste disposed (RWD)	Output	kg	0.0003781	7.254E-7	0.000003222	0.00005046	0	0.002164	0.000006098	9.888E-7	6.402E-7	-0.00002493
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.01255	0	0.2355	0	0	0.3464	0.0000184	-0.00007896
Materials for energy recovery (MER)	Output	kg	0	0	0.002707	0	0.0003289	0	0	0.2051	4.499E-7	-0.0000104
Exported electrical energy (EEE)	Output	MJ	0	0	0.004077	0	0.01448	0	0	0.3151	0.00002919	-0.00002547
Exported thermal energy (EET)	Output	MJ	0	0	0.06169	0	0.2191	0	0	4.767	0.0004416	-0.0003854

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	183.6	0.1105	4.213	7.353	0.0573	241.7	0.9291	0.4738	0.1877	-7.827
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.003995	2.007E-7	0.000001471	0.000009924	9.969E-8	0.00132	0.000001687	3.672E-7	8.018E-8	-0.001008
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.104	0.00002238	0.002487	0.008027	0.0000194	0.1383	0.0001881	0.0002695	0.00007153	-0.04268
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.3501	0.000002913	0.0001185	0.0001847	0.4291	0.4894	0.00002449	0.00008714	0.000009556	-0.001494
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	15.41	0.007481	0.476	0.5207	0.004096	17.7	0.06288	0.5278	0.03397	-0.5886
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	15.08	0.007487	0.4762	0.5209	0.4332	18.27	0.06293	0.528	0.03406	-0.5902
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.02461	0.000002735	0.00007502	0.0002593	0.000001355	0.07303	0.00002299	0.00008787	0.00007644	-0.0001168
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	15.51	0.007486	0.4497	0.5209	0.004097	18.23	0.06293	0.5279	0.03506	-0.5852
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001302	7.018E-8	0.00001057	0.000003323	3.363E-8	0.001273	5.899E-7	0.000001391	4.377E-7	-0.0002359
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01649	0.000004406	0.0005136	0.001931	0.000006415	0.0152	0.00003704	0.00008042	0.00004376	-0.002163
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.1844	0.00004927	0.005659	0.0215	0.00006945	0.1979	0.0004142	0.0008555	0.0002131	-0.02989
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.05993	0.00001845	0.00149	0.005811	0.00001996	0.05322	0.0001551	0.0002206	0.00008328	-0.008434
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000002682	1.629E-9	6.975E-9	1.147E-7	8.65E-10	0.000001214	1.368E-8	3.624E-9	1.642E-9	-0.002106
Water (user) deprivation potential (WDP)	m3 world eqv.	481.9	0.03604	0.6866	4.87	0.07262	4.213E+4	0.303	4.458	1.685	30.18

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.4698	0.0004594	0.003645	0.03188	0.0002452	4.384	0	0.003862	0.002248	0.0006811	-0.02954
Potential incidence of disease due to PM emissions (PM)²	disease incidence	9.337E-7	4.83E-10	3.358E-8	1.841E-8	2.86E-10	9.917E-7	0	4.066E-9	1.589E-9	1.317E-9	-9.181E-8
Potential Soil quality index (SQP)²	unitless	48.73	0.07573	0.8927	3.548	0.03844	121.7	0	0.6366	0.1135	0.4979	-9.192
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	5.756E-7	8.7E-11	5.838E-9	3.672E-9	9.6E-11	0.000001238	0	7.39E-10	4.1E-8	3.72E-10	-1.078E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.525E-8	0	1.34E-10	0	2E-12	5.255E-8	0	0	7.01E-10	4.3E-11	-1.248E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	889.7	0.0896	12.35	5.01	0.07642	1101	0	0.7532	1.759	88.17	-307.8