Process Data set: Uniled Isosafe Dimtowarm (en)

Process Data set: Uniled Isosafe Dimtowarm (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Uniled Isosafe Dimtowarm
Technical purpose of product or process	Attractive downlight for indoor and outdoor use. Mounted directly in concrete via the special blade spring system. Well integrated LED chip, dimmable via phase-dimming or DALI driver (not IsoSafe). Made of die-cast powder-coated aluminium or brushed steel (only indoors), glass diffuser. 42-degree scattering angle via reflector. 35 mm in total height, Flexible hole dimensions Ø76–Ø83. Tool-free mounting in mounting box for direct 230 V with loopable quick clips and automatic strain relief. IP54, KL II System Wattage: 7.3 W. Luminous flux: 560lm lm. Efficacy: 77 lm/W. Colour temperature: 2000-2800K. Colour rendering: Ra>95. MacAdams factor: SDCM: 3. Lifetime: L90/B10>50,000, . Light distribution: Direct. Control/Dimming: Trailing edge dimming. Luminiare class: Class II SELV. Housing: Aluminium. Optics: Tempered glass. Height: 37.0mm. Diameter: 94 mm. EAN: 7021989042112 The EPD also covers the following products: EAN: 7021989043089 - UNILED ISOSAFE DIMTOWARM WHITE LED DALI Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Uniled Isosafe Dimtowarm - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.029622641511 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-10-10 - 2030-10-10
Publication date	2025-10-10
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/uniled-isosafe-dimtowarm/904211/pdf/specification_904211.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/701850_Uniled%20Isosafe%20Dimtowarm/50/701850_UniLED%20IsoSafe%20DimToWarm.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-12404-12469_Uniled-Isosafe-Dimtowarm.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-10-10T16:00:35
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	af3206ac-7df3-44b4-81b2-a77a021fd2de
Date of last revision	2025-09-22T06:48:50.6424333Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-12404-12469
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	8.912	0.000459	0.1554	0.0264	0.0002381	1187	0.003323	0.0306	0.0211	-0.6986
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.411	0	0	0	-0.411	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	9.323	0.000459	0.1554	0.0264	-0.4108	1187	0.003323	0.0306	0.0211	-0.6986
Use of non renewable primary energy (PENRE)	Input	MJ	73.3	0.04055	1.549	2.324	0.01446	91.74	0.2936	0.2318	0.07979	-4.418
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	2.109	0	0	0	0	0	0	-2.628	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	75.41	0.04055	1.549	2.324	0.01446	91.74	0.2936	-2.396	0.07979	-4.418
Use of secondary material (SM)	Input	kg	0.2351	0	0	0	0	0	0	0	0.0004675	0.003059
Use of renewable secondary fuels (RSF)	Input	MJ	0.132	0.000008977	0.0001345	0.0008698	0.000007896	0.9318	0.00006499	0.0005195	0.0001053	0.000541
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.01921	0.00007623	0.001272	0.004661	0.00003255	2.321	0.0005519	-0.00002189	0.004063	-0.01759
Use of net fresh water (FW)	Input	m3	0.06441	0.000004535	0.004077	0.0001998	0.000006823	8.862	0.00003283	0.0002379	0.00006461	-0.003063
Hazardous waste disposed (HWD)	Output	kg	0.03625	0.000003665	0.0002122	0.0001133	0	0.05882	0.00002653	0.0000108	0.02404	-0.001643
Non hazardous waste dispose (NHWD)	Output	kg	0.7887	0.001947	0.01449	0.07174	0.0639	7.057	0.01409	0.01458	0.09957	-0.05664
Radioactive waste disposed (RWD)	Output	kg	0.0001847	2.661E-7	0.000001215	0.00001594	0	0.0008203	0.000001927	5.364E-7	1.951E-7	-0.00001335
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.01004	0	0.05944	0	0	0.1504	0.000002965	-0.0001254
Materials for energy recovery (MER)	Output	kg	0	0	0.001647	0	0.0003147	0	0	0.03306	7.253E-8	-0.00001646
Exported electrical energy (EEE)	Output	MJ	0	0	0.001528	0	0.003655	0	0	0.05104	0.000004705	-0.00004236
Exported thermal energy (EET)	Output	MJ	0	0	0.02311	0	0.05529	0	0	0.7722	0.00007118	-0.0006408

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	75.4	0.04055	1.549	2.323	0.01446	91.61	0.2936	0.2317	0.07973	-4.417
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.002024	7.362E-8	5.382E-7	0.000003136	2.516E-8	0.0005005	5.33E-7	1.789E-7	3.628E-8	-0.0005564
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.04949	0.000008211	0.0009138	0.002536	0.000004895	0.05244	0.00005944	0.0001057	0.00003137	-0.02442
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.07792	0.000001069	0.0002673	0.00005835	0.1078	0.1855	0.000007738	0.00004328	0.000004585	-0.0009104
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	6.417	0.002745	0.1734	0.1645	0.001034	6.711	0.01987	0.1016	0.009314	-0.3411
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	6.351	0.002747	0.1736	0.1646	0.1088	6.924	0.01989	0.1017	0.00936	-0.3419
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.01179	0.000001004	0.00002729	0.00008194	3.419E-7	0.02768	0.000007265	0.00004695	0.00004122	0.000139
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	6.457	0.002747	0.1639	0.1646	0.001034	6.91	0.01989	0.1017	0.00936	-0.3382
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0006594	2.575E-8	0.00000387	0.00000105	8.488E-9	0.0004827	1.864E-7	7.196E-7	2.259E-7	-0.0001362
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.007511	0.000001617	0.0001893	0.0006102	0.000001619	0.005764	0.0000117	0.0000242	0.00001179	-0.001221
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.08348	0.00001808	0.002084	0.006795	0.00001753	0.07502	0.0001309	0.0002651	0.00008591	-0.01696
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.02751	0.000006769	0.0005524	0.001836	0.000005038	0.02017	0.00004901	0.00007166	0.00003483	-0.004806
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000006146	5.99E-10	2.608E-9	3.626E-8	2.18E-10	4.602E-7	4.321E-9	1.562E-9	5.97E-10	-0.0003495
Water (user) deprivation potential (WDP)	m3 world eqv.	239.8	0.01322	0.2487	1.539	0.01833	357.2	0.09574	2.234	0.6381	14.53

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.2317	0.0001685	0.001351	0.01007	0.00006187	1.662	0	0.00122	0.001156	0.0002531	-0.01566
Potential incidence of disease due to PM emissions (PM)²	disease incidence	3.592E-7	1.74E-10	1.232E-8	5.816E-9	7.2E-11	3.759E-7	0	1.285E-9	6.85E-10	5.68E-10	-4.885E-8
Potential Soil quality index (SQP)²	unitless	22.64	0.02779	0.3286	1.121	0.009701	46.14	0	0.2012	0.05692	0.1954	-4.116
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	2.966E-7	3.1E-11	2.216E-9	1.16E-9	2.5E-11	4.693E-7	0	2.34E-10	2.175E-8	1.78E-10	-6.986E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	8.16E-9	0	4.8E-11	0	0	1.992E-8	0	0	3.69E-10	2.1E-11	-8.97E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	424.5	0.03288	4.531	1.583	0.01928	417.4	0	0.238	0.5609	38.87	-178