Close Go back Collapse all sections
Process Data set: Fenomastic Hygiene Emulsion Silk, El-Mohandes Jotun S.A.E. (Egypt) (en) en

Key Data Set Information
Location EG
Geographical representativeness description Global. Transport to market is not included in this EPD.
Reference year 2020
Name
Fenomastic Hygiene Emulsion Silk, El-Mohandes Jotun S.A.E. (Egypt)
Use advice for data set The flowchart in the figure below illustrates the system boundaries for the analysis, in accordance with the modular principle of EN 15804. The analysis is a cradle-to-gate (A1 - A3) study.
Technical purpose of product or process Fenomastic Hygiene Emulsion Silk is a superior quality emulsion paint, designed for interior surfaces. It is based on 100 % pure acrylic emulsion giving an eggshell finish. The declared product is specially designed to offer resistance against 22 different varieties of bacteria and fungus. It offers good flow, hiding power, incan anti bacterial and colour retention properties. In addition, it has very good opacity, outstanding washability and leveling, thereby creating a high-class finish. This product provides smooth durable and washable silk finish. It is strongly recommended for interiors of Hospitals, Hotels, Schools, Wash rooms, Kitchens, living rooms etc. The declared product is free from harmful chemicals like APEO, formaldehyde, heavy metals are not used as active ingredients, and has low VOC, which ensures good indoor air quality. This product is equipped with advance HCT formula which can withstand hairline cracks upto 1 mm. For information on Green Building Standard credits, see "Additional Information" on page 4. The material composition of the declared mixed product is given below:
Classification
Class name : Hierarchy level
  • EPDNorge: Construction / Paint
General comment on data set Data quality: The CEPE database is used as basis for the raw material composition. Specific data for the product composition and raw material amounts has been provided by the manufacturer and represents the production of the declared product. Production site data was collected in 2015. Representative data from ecoinvent v3.2 was used for other processes. The data quality for the material input in A1 is presented in tabular form. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy, water and waste production in-house is primarily allocated equally among all products through mass allocation. Specific allocation was performed for certain waste flows according to information provided by the site manager. VOC emissions have been allocated entirely to the production of solvent based paints. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and essential energy is included. The production process for raw materials and energy flows with very small amounts (less than 0.1 % dry matter) are not included. In total, more than 99% of the material input is included. These cut-off criteria do not apply for non-energy related emissions (such as wastes, hazardous materials and substances).
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Data set valid until 2025
Time representativeness description "25.05.2020" - "25.05.2025"
Technological representativeness
Technology description including background system TDS Specific gravity: 1.26 SDS Density: 1.143 to 1.26 g/cm³ Solids by volume: 37 ± 2 volume% Film thickness per coat: Dry film thickness: 40 - 60 µm Wet film thickness: 108 - 162 µm Theoretical spreading rate: 9.25 - 6.2 m²/l The most representative and worst case formulation produced at the manufacturing site is chosen for this EPD. For products with a selection of colours, this will be the formulation with the highest content of titanium dioxide. The product packaging is based on an average sized metal packaging, including secondary packaging such as pallets and plastic wrapping. For safety, health and environmental conditions, see the Safety Data Sheet for the declared product on www.jotun.com. For information on technical data, application and use of the product, see the Technical Data Sheet for the declared product on www.jotun.com.

Indicators of life cycle

IndicatorDirectionUnit Production
A1-A3
Input
  • 2.706
Input
  • 0.6272
Input
  • 3.334
Input
  • 45.6
Input
  • 0
Input
  • 45.6
Input
  • 0
Input
  • 0
Input
  • 0
Input
  • 0.04661
Output
  • 0.0002298
Output
  • 1.935
Output
  • 7.455E-7
Output
  • 0
Output
  • 0.00001126
Output
  • 0.00002814
Output
  • 0
Output
  • 0

IndicatorUnit Production
A1-A3
  • 42.05
  • 0.00003149
  • 0.01826
  • 2.823
  • 0.004096
  • 0.002159
  • 2.896E-7