Process Data set: AXLJ-TTCL TSLF 1x185/35 AFR 36kV (en)

Process Data set: AXLJ-TTCL TSLF 1x185/35 AFR 36kV (en) en

Process information

Key Data Set Information
Location	SE
Geographical representativeness description	Scandinavia (B6 calculations done with Danish el.mix)
Reference year	2024
Name	AXLJ-TTCL TSLF 1x185/35 AFR 36kV
Technical purpose of product or process	Single-core, distribution cable for outdoor use in 3-phase formation. Installation in pipes and ground/water. Both radial and longitudinal water sealed. Can be ploughed down. The outer sheath has a conductive layer that greatly extends the possibilities to do a sheath testing before, during and after installation. Ripcords for easier and safer stripping of the outer sheath. Conductor design: Round, stranded aluminum conductor, class 2 Conductor material: Aluminium Core insulation material: XLPE Screen construction: Aluminium tape and copper wire Material outer sheath: MDPE Laminated sheath: Yes Longitudinal water blocking screen: Yes Rip cord: Yes UV resistant: Yes
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Prysmian Group Danmark A/S
Quantitative reference
Reference flow(s)	AXLJ-TTCL TSLF 1x185/35 AFR 36kV - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-09-06" - "2029-09-06"
Publication date	2024-09-06
Technological representativeness
Technology description including background system	AXLJ-TTCL TSLF 18/30(36) KV SAPcode 20102189 STANDARDS, CERTIFICATIONS AND APPROVALS: SS 424 14 16 Construction standard 12-36 kV CENELEC HD 620 Part 10 Section K Harmonized construction standard CENELEC HD 620 Part 10 Section M Harmonized construction and testing standard

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

NEPD-7449-6834_AXLJ-TTCL-TSLF-1x185-35-AFR-36kV.pdf

Original EPDs

NEPD-7449-6834

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-09-14T12:34:08
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	aa86a057-d3a9-49bc-a034-a188745ff02e
Date of last revision	2024-09-03T11:45:37.0629454Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-7449-6834
Owner of data set	Prysmian Group Danmark A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	24.11	0.05687	4.036	0.0302	0.5655	0.2139	0.01806	0.002866	0.01679	-19.19
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	24.11	0.05687	4.036	0.0302	0.5655	0.2139	0.01806	0.002865	0.01679	-19.19
Use of non renewable primary energy (PENRE)	Input	MJ	154.9	3.658	8.528	2.4	3.422	0.2491	1.28	0.09459	0.1974	-34.57
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	41.28	0	0	0	0.03054	0	0	-39.75	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	196.2	3.658	8.528	2.4	3.453	0.2491	1.28	-39.65	0.1974	-34.57
Use of secondary material (SM)	Input	kg	0.1377	0	0	0	0.002779	0	0	0	0.001217	0.01107
Use of renewable secondary fuels (RSF)	Input	MJ	0.2343	0.001673	0.01584	0.001056	0.005079	0.008042	0.0006465	0.00007955	0.0003501	-0.005079
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.05063	0.008657	0.05099	0.003541	0.002359	0.00004257	0.002308	0	0.00183	-0.3994
Use of net fresh water (FW)	Input	m3	0.1632	0.0004319	0.009868	0.0002732	0.003489	0.0007936	0.0001348	0.0002855	0.0002486	-0.07487
Hazardous waste disposed (HWD)	Output	kg	0.09006	0.0002199	0.04071	0.0001314	0.003083	0.00003293	0.00006528	0	0.02296	0.01049
Non hazardous waste dispose (NHWD)	Output	kg	2.662	0.1907	0.06208	0.2087	0.07826	0.00152	0.06117	0	0.7283	-0.8015
Radioactive waste disposed (RWD)	Output	kg	0.0003808	0.00002458	0.0001268	0.00001638	0.00001117	7.845E-7	0.000008727	0	0.000001329	-0.0001417
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.002675	0	0.01015	0	0	0.5047	0.00004469	-0.0004333
Materials for energy recovery (MER)	Output	kg	0	0	0.1526	0	0.01251	0	0	0.4729	0.00003183	-0.00005705
Exported electrical energy (EEE)	Output	MJ	0	0	0.08888	0	0.02004	0	0	0.9129	0.0003407	-0.0001398
Exported thermal energy (EET)	Output	MJ	0	0	1.345	0	0.3032	0	0	13.81	0.005154	-0.002115

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	193.7	3.657	8.509	2.399	4.198	0.249	1.28	0.09458	0.1974	-34.57
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0005742	0.000004052	0.000003012	0.000002634	0.00001173	1.711E-7	0.000002299	5.146E-8	6.732E-8	-0.00003239
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1193	0.002304	0.0005433	0.0006485	0.002468	0.00007704	0.000347	0.00018	0.00006692	-0.02464
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.1133	0.0001107	0.01867	0.00006331	0.002643	0.0001991	0.00003461	0.00001181	0.00000529	-0.0123
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	13.74	0.2515	0.1618	0.1543	0.3175	0.01921	0.08488	1.42	0.0584	-2.72
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	13.93	0.2517	0.1852	0.1544	0.3216	0.01943	0.08494	1.42	0.05841	-2.784
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.06922	0.0001025	0.004654	0.00004504	0.001481	0.00002587	0.00002967	0.000001754	0.000002553	-0.05223
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	13.85	0.2517	0.1812	0.1544	0.32	0.02688	0.08494	1.42	0.05917	-2.641
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0007759	0.000002197	0.000005292	0.000001176	0.00001571	0.000001572	6.666E-7	1.116E-7	1.242E-7	-0.0001506
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01454	0.0007104	0.0001347	0.000195	0.000317	0.00001296	0.0001029	0.00008641	0.00007999	-0.0027
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.1706	0.007852	0.001334	0.002156	0.003685	0.000185	0.001138	0.0009333	0.0002664	-0.03085
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.05241	0.00219	0.0003216	0.0006934	0.001125	0.00003943	0.0003484	0.0002235	0.00008708	-0.009994
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	6.809E-7	5.422E-8	3.719E-8	3.564E-8	1.662E-8	6.53E-10	1.935E-8	1.12E-9	2.549E-9	-0.005834
Water (user) deprivation potential (WDP)	m3 world eqv.	2085	2.784	849.4	1.841	58.87	3.87	1.221	0.2303	3.094	-1504

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.3906	0.0158	0.2873	0.01049	0.01422	0	0	0	0	0	0.001218	0	0	0.005595	0.0001626	0.001104	-0.1517
Potential incidence of disease due to PM emissions (PM)²	disease incidence	9.626E-7	1.96E-8	4.254E-9	1.358E-8	2.016E-8	0	0	0	0	0	3.77E-10	0	0	6.111E-9	7.09E-10	1.248E-9	-2.345E-7
Potential Soil quality index (SQP)²	unitless	33.52	2.95	3.839	2.752	0.8906	0	0	0	0	0	0.4094	0	0	0.8824	0.01168	0.5733	-8.68
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	9.933E-7	2.946E-9	3.983E-9	1.697E-9	2.009E-8	0	0	0	0	0	2.9E-10	0	0	1.018E-9	1.233E-9	2.31E-10	-1.534E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.686E-8	0	1.64E-10	0	5.41E-10	0	0	0	0	0	9E-12	0	0	0	3.3E-11	1E-11	-7.526E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	813	2.798	5.037	1.755	19.5	0	0	0	0	0	0.4432	0	0	0.9427	0.3227	151.1	-104