Process Data set: Haplast PE preassureless water tanks (en)

Process Data set: Haplast PE preassureless water tanks (en) en

Process information

Key Data Set Information
Location	NO
Geographical representativeness description	Nordic countries.
Reference year	2024
Name	Haplast PE preassureless water tanks
Use advice for data set	The system boundaries for this EPD is module A1-A5 and C2. A1: Packaging is not included due to different packaging scenarios.
Technical purpose of product or process	Haplast PE tanks are used as pressureless water reservoirs/water tanks, tanks in sedimentation or treatment plants, reservoirs for equalizing the load for sewage systems and for other purposes where liquid is to be stored in buried tanks. Further information can be found at https://haplast.no/ This EPD applies only to the water tanks produced at Haplast, and does not include technical installations (pump, valve, ladder, filter, etc.). Calculations for this EPD is done based on an average water tank with size: - Di 2.500 mm - L 10.000 mm Project specific EPD can be delivered on request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Piping
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Haplast AS
Quantitative reference
Reference flow(s)	Haplast PE preassureless water tanks - 1.0 * 1.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	2024-09-04 - 2029-09-04
Publication date	2024-09-04
Technological representativeness
Technology description including background system	www.haplast.no

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 019:2018 Part B for Piping systems use in sewage and storm water systems (under gravity)

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 019:2018 Part B for Piping systems use in sewage and storm water systems (under gravity)

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-7405-6792_Haplast-PE-preassureless-water-tanks.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-03-04T10:44:30
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	a925cff8-2dfe-433b-ba1e-545fd7d51cfa
Date of last revision	2024-08-29T10:07:04.1761553Z
Data set version	00.05.000
Registration authority	EPD Norway
Registration number	NEPD-7405-6792
Owner of data set	Haplast AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Production A1-A3	Transport A4	Transport C2	Waste processing C3
Use of renewable primary energy (PERE)	Input	MJ	5.506	0.01061	0.003005	0
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	5.506	0.01061	0.003005	0
Use of non renewable primary energy (PENRE)	Input	MJ	25.81	0.741	0.2099	0
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	41.47	0	0	-41.47
Total use of non renewable primary energy resource (PENRT)	Input	MJ	67.27	0.741	0.2099	-41.47
Use of secondary material (SM)	Input	kg	0.178	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.0839	0.0003795	0.0001075	0
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.0254	0.001357	0.0003844	0
Use of net fresh water (FW)	Input	m3	0.05185	0.00007924	0.00002245	0
Hazardous waste disposed (HWD)	Output	kg	0.00888	0.00003821	0.00001083	0
Non hazardous waste dispose (NHWD)	Output	kg	0.2547	0.03603	0.01021	0
Radioactive waste disposed (RWD)	Output	kg	0.00008323	0.000005047	0.00000143	0
Components for re-use (CRU)	Output	kg	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.00007875	0	0	0
Materials for energy recovery (MER)	Output	kg	0.01843	0	0	0
Exported electrical energy (EEE)	Output	MJ	0.01096	0	0	0
Exported thermal energy (EET)	Output	MJ	0.1659	0	0	0

Core environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Transport C2
Abiotic depletion potential - fossil resources (ADPF)	MJ	65.19	0.7409	0.2099
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00002439	0.000001354	3.835E-7
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.007612	0.0001408	0.0000399
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.01117	0.00002028	0.000005747
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	2.107	0.049	0.01388
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	2.12	0.04904	0.01389
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.001064	0.00001744	0.000004942
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	2.04	0.04904	0.01389
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0000389	3.915E-7	1.109E-7
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.001371	0.00002787	0.000007895
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.01528	0.0003117	0.00008831
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.006738	0.0001194	0.00003383
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	1.114E-7	1.11E-8	3.145E-9
Water (user) deprivation potential (WDP)	m3 world eqv.	261.1	0.7166	0.203

Additional environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.09476	0.003238	0	0	0.0009176	0	0	0
Potential incidence of disease due to PM emissions (PM)²	disease incidence	7.369E-8	3E-9	0	0	8.5E-10	0	0	0
Potential Soil quality index (SQP)²	unitless	6.356	0.5183	0	0	0.1468	0	0	0
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	1.707E-8	6E-10	0	0	1.7E-10	0	0	0
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	6.27E-10	0	0	0	0	0	0	0
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	15.29	0.5492	0	0	0.1556	0	0	0