Process Data set: Densit Coat Q series (en)

Process Data set: Densit Coat Q series (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Global.
Reference year	2024
Name	Densit Coat Q series
Use advice for data set	The system includes the extraction and production of raw materials (module A1), the transport of these materials by truck and ship (module A2), the manufacturing of Densit Coat Q series (module A3), and its distribution to clients (module A4). It also includes the waste treatment of packaging and the material loss during installation. The product is assumed to be treated as a cement-based technical-chemical product at end-of-life.
Technical purpose of product or process	Shrinkage compensated high performance spraying mortar with extreme capability to bind to old as well as new concrete surfaces. This EPD covers two products: Densit Coat Q5 and Densit Coat Q25. For product specification, see https://itwperformancepolymers.com/products/densit
Classification	Class name : Hierarchy level EPDNorge: Construction / Technical-chemical building materials products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	ITW Performance Polymers
Quantitative reference
Reference flow(s)	Densit Coat Q series - 1.0 * 1.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	2024-11-12 - 2029-11-12
Publication date	2024-11-12
Technological representativeness
Technology description including background system	For technical datasheets, see https://itwperformancepolymers.com/products/densit

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 009:2021 Part B for Technical - Chemical products for building and construction industry

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 009:2021 Part B for Technical - Chemical products for building and construction industry

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8045-7720_Densit-Coat-Q-series.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Linda Høibye

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-09-01T01:43:27
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	a41abc6f-73b4-42d0-9f3f-cddb0d87eb40
Date of last revision	2024-11-18T09:40:35.0505994Z
Data set version	00.09.000
Registration authority	EPD Norway
Registration number	NEPD-8045-7720
Owner of data set	ITW Performance Polymers
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	0.4841	0.01706	0.02538	0.0003	0.001812	0.001135	0.001914	-0.006139
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.2913	0	-0.2913	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	0.777	0.01706	-0.2659	0.0003	0.001812	0.001135	0.001914	-0.006139
Use of non renewable primary energy (PENRE)	Input	MJ	4.164	1.233	0.2877	0.05507	0.1266	0.002206	0.1244	-0.004935
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	0.2882	0	-0.2882	0	0	0	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	4.444	1.233	-0.0008646	0.05507	0.1266	0.002206	0.1244	-0.004935
Use of secondary material (SM)	Input	kg	0.06791	0	0.003395	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.005694	0.0006044	0.0003218	0	0.00006482	0	0.00003954	-0.00001946
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.001231	0.002293	0.0001993	0	0.0002318	0	0.0001137	-0.0003292
Use of net fresh water (FW)	Input	m3	0.001854	0.0001276	0.0001088	0.000002834	0.00001354	0.000003778	0.0001481	-0.0001486
Hazardous waste disposed (HWD)	Output	kg	0.0115	0.00006288	0.0005787	0.000001621	0.000006528	2.203E-7	0	-9.734E-7
Non hazardous waste dispose (NHWD)	Output	kg	0.5094	0.05636	0.08154	0.00006521	0.006156	0.000006959	0.9	-0.00004833
Radioactive waste disposed (RWD)	Output	kg	0.000006788	0.000008409	8.233E-7	3.824E-7	8.622E-7	2.332E-8	0	-3.515E-8
Components for re-use (CRU)	Output	kg	0	0	0.0171	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.000695	0	0.009021	0	0	0.1	0	0
Materials for energy recovery (MER)	Output	kg	0.0008968	0	0.0009378	0	0	0	0	0
Exported electrical energy (EEE)	Output	MJ	0.0006585	0	0.0007083	0	0	0	0	0
Exported thermal energy (EET)	Output	MJ	0.009963	0	0.01072	0	0	0	0	0

Core environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	2.572	1.233	0.2082	0.05507	0.1266	0.002205	0.1244	-0.00472
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.3926	0.000002155	0.01963	6.14E-9	2.312E-7	9.01E-10	3.411E-8	-2.092E-8
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.001447	0.0004171	0.00009925	0.00004186	0.00002406	5.748E-7	0.00003761	-0.000002549
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.02862	0.00003329	0.02894	7.502E-7	0.000003465	6.134E-7	0.000003278	-0.00000469
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	0.2989	0.08248	0.02041	0.004	0.008371	0.000071	0.003854	-0.0002882
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.2703	0.08254	0.04935	0.004	0.008378	0.000072	0.003858	-0.0002951
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.00008493	0.00003139	0.000006072	3.154E-7	0.00000298	9.826E-8	7.558E-7	-0.000002195
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.3029	0.08253	0.02061	0.004	0.008377	0.0000711	0.003858	-0.0003054
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.00001085	6.355E-7	5.814E-7	1.457E-8	6.688E-8	4.487E-9	2.876E-8	-1.135E-8
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0002102	0.00009198	0.00001764	0.00001848	0.00000476	1.684E-7	0.0000141	-8.743E-7
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.002369	0.001026	0.0001936	0.0002	0.00005325	0.00000194	0.0001554	-0.00001012
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.001089	0.0003262	0.00007781	0.00005574	0.0000204	5.195E-7	0.00004446	-0.000002693
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	1.67E-8	1.86E-8	2.035E-9	8.64E-10	1.896E-9	1.4E-11	1.877E-9	-0.000004316
Water (user) deprivation potential (WDP)	m3 world eqv.	3.936	1.133	0.2931	0.0117	0.1224	0.2434	0.2618	-0.1922

Additional environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.008526	0.005382	0.0007748	0.00024	0.0005532	0.000037	0.0005398	-0.00004096
Potential incidence of disease due to PM emissions (PM)²	disease incidence	2.255E-8	4.677E-9	1.695E-9	5.066E-9	5.13E-10	9E-12	8.01E-10	-7.3E-11
Potential Soil quality index (SQP)²	unitless	2.216	0.8184	0.183	0.00669	0.08854	0.001247	0.4533	0.003127
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	2.908E-9	9.35E-10	2.05E-10	2.8E-11	1.03E-10	1E-12	3.6E-11	-9E-12
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.039E-9	0	5.2E-11	1E-12	0	0	2E-12	0
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	6.648	0.9015	0.3894	0.0301	0.09383	0.001563	0.06151	-0.008595