Process Data set: Sense Line 120x600 DALI (en)

Process Data set: Sense Line 120x600 DALI (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Sense Line 120x600 DALI
Technical purpose of product or process	Create your own design in T-profile ceilings with Sense Line 600. Sense Line is also available in 1200mm length. The luminaire has a light steel housing and a 3-layer optical system for low glare with UGR<19. Sense Line is delivered complete with driver and connection box, including Linect connection. Sense Line is available in both phase cut and Dali/Push-dim. The driver has dip switches for flexible light output, and twist connection that enables use of the independent Emergency kit or the Sensor Dim box. Fixing springs are available as accessories for use in plate ceilings. System Wattage: 10.0 W. Luminous flux: 1160 lm. Efficacy: 116 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, . Light distribution: Direct. Control/Dimming: DALI-2. Luminiare class: Class II SELV. Housing: Sheet steel. Optics: Acrylic (PMMA). Height: 35.0mm. Length: 595.0 mm. Width: 118.0 mm. EAN: 7021982126918 The EPD also covers the following product: EPD: 7021982126932 - SENSE LINE 120X600 4000K DALI LINECT Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Sense Line 120x600 DALI - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.378443396256 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-03-03 - 2030-03-03
Publication date	2025-03-03
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/sense-line/212691/pdf/specification_212691.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/703060_Sense%20Line/50/703060_Sense%20Line.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-9256-8846_Sense-Line-120x600-DALI.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-03-20T10:33:17
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	a283a62a-9cf0-498c-89e3-bcb02390eb42
Date of last revision	2025-02-26T19:55:44.4949496Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-9256-8846
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	41.6	0.007822	0.4187	0.1121	0.003045	1709	0.01343	0.08432	0.0992	-3.009
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	4.918	0	0	0	-4.918	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	46.52	0.007822	0.4187	0.1121	-4.915	1709	0.01343	0.08432	0.0992	-3.009
Use of non renewable primary energy (PENRE)	Input	MJ	301.2	0.6911	5.147	9.869	0.185	132.2	1.187	0.4672	0.3182	-10.84
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	8.014	0	0	0	0	0	0	-8.909	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	309.2	0.6911	5.147	9.869	0.185	132.2	1.187	-8.442	0.3182	-10.84
Use of secondary material (SM)	Input	kg	1.095	0	0	0	0	0	0	0	0.002494	0.004027
Use of renewable secondary fuels (RSF)	Input	MJ	0.2396	0.000153	0.0002317	0.003622	0.000101	1.342	0.0002628	0.0009755	0.0002841	0.00599
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.4864	0.001299	0.002526	0.01974	0.0004164	3.344	0.002231	-0.00004389	0.02164	0.06574
Use of net fresh water (FW)	Input	m3	0.2525	0.00007728	0.003209	0.0008608	0.00008727	12.77	0.0001327	0.0007415	0.0002054	-0.01053
Hazardous waste disposed (HWD)	Output	kg	0.1156	0.00006245	0.0004289	0.000501	0	0.08474	0.0001073	0.00002393	0.1178	-0.004008
Non hazardous waste dispose (NHWD)	Output	kg	3.243	0.03318	0.05354	0.3129	0.8173	10.17	0.05698	0.0349	0.1815	-0.2175
Radioactive waste disposed (RWD)	Output	kg	0.0008152	0.000004536	0.000009997	0.00006758	0	0.001182	0.00000779	0.00000135	3.204E-7	-0.00002959
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.02645	0	0.7602	0	0	0.2227	0.00001098	-0.0001576
Materials for energy recovery (MER)	Output	kg	0	0	0.002492	0	0.00121	0	0	0.1224	2.685E-7	-0.00002075
Exported electrical energy (EEE)	Output	MJ	0	0	0.003829	0	0.04675	0	0	0.1881	0.00001742	-0.00005084
Exported thermal energy (EET)	Output	MJ	0	0	0.05793	0	0.7072	0	0	2.845	0.0002635	-0.0007692

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	306.3	0.6911	5.146	9.869	0.185	132	1.187	0.4671	0.3179	-10.83
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00853	0.000001255	0.000001321	0.00001354	3.218E-7	0.0007209	0.000002155	3.91E-7	1.577E-7	-0.001011
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.217	0.0001399	0.002901	0.01035	0.00006261	0.07553	0.0002403	0.0002347	0.0001311	-0.05287
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-1.249	0.00001821	0.00008791	0.0002484	1.386	0.2673	0.00003128	0.00009099	0.00002284	-0.00233
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	24.93	0.04678	0.5664	0.6974	0.01322	9.667	0.08034	0.3364	0.03941	-0.9038
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	23.74	0.04681	0.5666	0.6977	1.4	9.974	0.0804	0.3366	0.03965	-0.9079
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.05219	0.0000171	0.00006171	0.000343	0.000004373	0.03988	0.00002937	0.0001624	0.0002182	-0.001788
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	25.11	0.04681	0.5398	0.6977	0.01323	9.954	0.0804	0.3366	0.04017	-0.9817
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.004277	4.388E-7	0.00001027	0.000004547	1.086E-7	0.0006953	7.536E-7	0.000001288	0.000001126	-0.0003246
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02829	0.00002755	0.000676	0.002486	0.00002071	0.008302	0.00004732	0.00006181	0.00004348	-0.002782
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.342	0.0003081	0.00745	0.02768	0.0002242	0.1081	0.0005291	0.0006673	0.0003124	-0.03838
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.09876	0.0001154	0.002809	0.007504	0.00006444	0.02906	0.0001981	0.0001774	0.0001432	-0.01111
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000007599	1.018E-8	2.083E-8	1.536E-7	2.792E-9	6.629E-7	1.747E-8	3.646E-9	1.86E-9	-0.001497
Water (user) deprivation potential (WDP)	m3 world eqv.	786.8	0.2254	0.4805	6.376	0.2344	514.6	0.3871	5.493	0.9314	-12.88

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.074	0.002872	0.007433	0.0427	0.0007914	2.394	0	0.004934	0.002512	0.0006635	-0.03419
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001269	3.021E-9	3.403E-8	2.559E-8	9.24E-10	5.415E-7	0	5.194E-9	1.441E-9	2.402E-9	-1.279E-7
Potential Soil quality index (SQP)²	unitless	77.87	0.4735	1.001	4.858	0.1241	66.46	0	0.8133	0.113	0.8276	-9.717
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001446	5.46E-10	2.471E-8	5.069E-9	3.1E-10	6.76E-7	0	9.44E-10	5.219E-8	8.21E-10	-2.169E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	3.111E-8	0	1.55E-10	0	8E-12	2.87E-8	0	0	8.81E-10	1.12E-10	-3.788E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1857	0.5603	12.82	6.785	0.2467	601.2	0	0.9623	1.418	36.68	-410.4