Process Data set: SLIM LINE D 1G6 R100/3000 (en)

Process Data set: SLIM LINE D 1G6 R100/3000 (en) en

Process information

Key Data Set Information
Location	EE
Geographical representativeness description	Denmark
Reference year	2025
Name	SLIM LINE D 1G6 R100/3000
Technical purpose of product or process	Halogen-free, fire retardant and UV-stabilized cable for fixed installation indoors in walls, trays, ducts or outdoors in pipes, air or directly in the ground. Not suitable for application in vibrated concrete. Outer sheath is UV-stabilized and the cable is CPR fire class Dca. Cable Shape: Round Conductor: solid annealed copper Conductor Insulation: XLPE Filler: Halogen free compound Outer Sheath: Halogen free compound, UV resistant. Cable shape: Round Nominal voltage: U0 300V Nominal voltage: U 500V
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. The data collection at the factory has been conducted during the following period: 01/2024-12/2024. This correspond to 12 months/ a year of production. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Prysmian Group Danmark A/S
Quantitative reference
Reference flow(s)	SLIM LINE D 1G6 R100/3000 - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 5.45283019E-4 kg Carbon content (biogenic) - packaging: 0.00308006262 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-10-20 - 2030-10-20
Publication date	2025-10-20
Technological representativeness
Technology description including background system	SAP no: 20474195 EAN code: 4741532912138 Adheres to: EN 50575 Cables in construction works subject to reaction to fire EN 60228 Conductor standard EN 50363 Standard for insulation, sheathing and covering materials EN 50399 Heat release and smoke production during flame propagation test EN 50267-2-1 Halogen-free: Fire test for emission of halogens (<0,5% halogen) EN 50267-2-2 Fire test for emission of acidity or corrosive gasses (pH = 4,3, Conductivity=1 REACH Regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. ROHS RoHS compliance - restriction of hazardous substances directive

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-12251-12276_SLIM-LINE-D-1G6-R100-3000.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-10-20T10:41:24
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	a1fcb49f-4683-4b7e-89c8-f06cd3189cc3
Date of last revision	2025-09-02T10:26:11.6427115Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-12251-12276
Owner of data set	Prysmian Group Danmark A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	0.7464	0.006772	0.1377	0.002215	0.007011	0.001064	0.0003037	0.001564	-0.3389
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.1196	0	0	0	-0.1048	0	-0.01412	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	0.866	0.006772	0.1377	0.002215	-0.09782	0.001064	-0.01382	0.001564	-0.3389
Use of non renewable primary energy (PENRE)	Input	MJ	3.854	0.4743	0.01548	0.1972	0.06618	0.07541	0.005822	0.01415	-0.277
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	1.523	0	0	0	-0.02374	0	-1.256	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	5.377	0.4743	0.01548	0.1972	0.04244	0.07541	-1.25	0.01415	-0.277
Use of secondary material (SM)	Input	kg	0.01611	0	0	0	0.0001658	0	0	0	0.007784
Use of renewable secondary fuels (RSF)	Input	MJ	0.01119	0.0002415	0.0002364	0.00007487	0.00008769	0.00003808	0.000006674	0.00003244	0.0006974
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.0002949	0.0008478	0.00004675	0.0002283	0.00003564	0.000136	0	0.0000233	-0.01284
Use of net fresh water (FW)	Input	m3	0.005393	0.00005113	0.001034	0.00001966	0.00006136	0.000007941	0.00004486	0.00001827	-0.0009441
Hazardous waste disposed (HWD)	Output	kg	0.002374	0.00002494	0.0001816	0.00001019	0.00003423	0.000003846	0	0.001186	-0.0003032
Non hazardous waste dispose (NHWD)	Output	kg	0.09237	0.02398	0.003024	0.01355	0.009859	0.003604	0	0.04905	-0.01375
Radioactive waste disposed (RWD)	Output	kg	0.00001268	0.00000323	7.455E-8	0.000001353	4.352E-7	5.141E-7	0	9.498E-8	-4.736E-7
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.005392	0	0.0007692	0	0.04216	0.000001743	-0.0003046
Materials for energy recovery (MER)	Output	kg	0	0	0.001321	0	0.007677	0	0.01944	4.264E-8	-0.00004011
Exported electrical energy (EEE)	Output	MJ	0	0	0.001257	0	0.005632	0	0.03145	0.000002766	-0.00009828
Exported thermal energy (EET)	Output	MJ	0	0	0.01902	0	0.0852	0	0.4757	0.00004185	-0.001487

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	5.332	0.4743	0.01429	0.1972	0.08797	0.0754	0.005822	0.01415	-0.2771
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00007661	8.569E-7	6.35E-9	1.922E-7	4.975E-7	1.355E-7	4.429E-9	4.696E-9	-0.00002505
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.01699	0.00009096	0.00001014	0.0001507	0.0001686	0.00002044	0.000009529	0.000004842	-0.00449
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.01022	0.00001302	0.0001313	0.000004942	0.01123	0.000002039	0.00173	0.001541	-0.0001294
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	0.2908	0.03126	0.002834	0.01327	0.004649	0.005001	0.04857	0.002644	-0.02936
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.2809	0.03129	0.002965	0.01328	0.01588	0.005004	0.0503	0.004185	-0.02961
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0002981	0.00001106	5.751E-7	0.000004973	0.000003163	0.000001748	1.628E-7	2.074E-7	-0.0001231
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.2927	0.03129	0.002946	0.01328	0.004689	0.005004	0.04856	0.00429	-0.01544
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0001428	2.512E-7	1.389E-8	8.856E-8	0.00000139	3.927E-8	7.985E-9	1.03E-8	-0.00003035
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0008183	0.00001824	0.000003935	0.00003973	0.000008893	0.000006062	0.00000456	0.000005993	-0.0001909
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.01191	0.000204	0.00004175	0.0004409	0.0001199	0.00006705	0.00004714	0.00001919	-0.002926
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.003451	0.00007785	0.00001134	0.0001227	0.0000373	0.00002053	0.00001135	0.000006328	-0.0007949
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000001065	7.1E-9	1.82E-10	2.964E-9	1.741E-8	1.14E-9	8.9E-11	1.76E-10	-0.0002009
Water (user) deprivation potential (WDP)	m3 world eqv.	14.18	0.4542	1.194	0.1269	0.1461	0.07193	0.03817	0.2903	0.9653

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.01406	0.002072	0.00005218	0.0008589	0.000857	0	0	0	0	0	0	0	0	0.0003296	0.000014	0.00008674	-0.0005472
Potential incidence of disease due to PM emissions (PM)²	disease incidence	3.834E-8	1.96E-9	2.3E-10	9.67E-10	4.21E-10	0	0	0	0	0	0	0	0	3.6E-10	4.1E-11	8.6E-11	-1.031E-8
Potential Soil quality index (SQP)²	unitless	3.516	0.3423	0.03725	0.1829	0.04422	0	0	0	0	0	0	0	0	0.05199	0.001015	0.03415	-0.7851
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	2.459E-7	3.82E-10	2.2E-11	1.39E-10	2.234E-9	0	0	0	0	0	0	0	0	6E-11	1.07E-10	2E-11	-4.991E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	3.013E-9	0	0	0	2.7E-11	0	0	0	0	0	0	0	0	0	2E-12	0	-5.84E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	155.5	0.3527	0.02249	0.1374	1.439	0	0	0	0	0	0	0	0	0.05554	0.07988	17.41	-41.31