Process Data set: Prelude Square 1200 (en)

Process Data set: Prelude Square 1200 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Prelude Square 1200
Technical purpose of product or process	Prelude Square is a mirror luminaire with a sharp design. The luminaire provides a very homogen light generated by a specific LED lens technology, which makes it the obvious choice next to a mirror. Therefore, it’s the ideal choice for bathrooms and similar environments. Prelude Square is available with or without an outlet behind a lift-up lid. The luminaire can be dimmed by trailing edge or DALI dimming. PIR versions with daylight and movement detection are also available. The light output can be adjusted by dipswitch on the driver. For the version without outlet, a cover available as an accessory. This directs the light up and down, making it ideal for settings where more indirect lighting is desired. System Wattage: 22.0 W. Luminous flux: 2860 lm. Efficacy: 130 lm/W. Colour temperature: 3000K. Colour rendering: Ra>90. MacAdams factor: SDCM: 3. Lifetime: L90/B10>, L80/B10>100,000. Light distribution: Direct. Control/Dimming: Trailing edge dimming. Luminiare class: Class II. Housing: Aluminium. Optics: Acrylic (PMMA). Height: 60.0mm. Length: null mm. Width: 1196.0 mm. EAN: 7021981114114 The EPD also covers the following product: EAN: 7021981114107 - PRELUDE SQUARE 1200 WHITE KL II 2700K EAN: 7021981114176 - PRELUDE SQUARE 1200 HVIT KL I 4000K DALI EAN: 7021981114190 - PRELUDE SQUARE 1200 HVIT KL II 4000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Prelude Square 1200 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.138235587011 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025 - 2030-05-31
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/int/en/pdf/article/111411/701402/specification_111411.pdf Link to CE Declaration: https://www.sg-as.com/int/en/file/techfile/AI65/Prelude%20Square.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-9518-9179_Prelude-Square-1200.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-11-17T11:00:15
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	a1a29129-a2fd-4117-9b23-e65522104483
Date of last revision	2025-11-14T15:22:01.0614588Z
Data set version	00.02.001
Registration authority	EPD Norway
Registration number	NEPD-9518-9179
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	57.46	0.0129	0.7262	0.1431	0.001112	3.13E+3	0.01801	0.08171	0.1066	-19.09
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	1.798	0	0	0	-1.798	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	59.26	0.0129	0.7262	0.1431	-1.797	3.13E+3	0.01801	0.08171	0.1066	-19.09
Use of non renewable primary energy (PENRE)	Input	MJ	487.3	1.14	7.216	12.59	0.06755	242	1.591	0.479	0.4068	-52.78
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	11.61	0	0	0	0	0	0	-12.55	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	498.9	1.14	7.216	12.59	0.06755	242	1.591	-12.07	0.4068	-52.78
Use of secondary material (SM)	Input	kg	1.032	0	0	0	0	0	0	0	0.002331	0.006286
Use of renewable secondary fuels (RSF)	Input	MJ	0.2298	0.0002524	0.0006384	0.004715	0.00003688	2.458	0.0003523	0.001022	0.000553	-0.008328
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.03827	0.002143	0.006009	0.02526	0.000152	6.123	0.002991	-0.00004777	0.02025	-0.17
Use of net fresh water (FW)	Input	m3	0.3806	0.0001275	0.01968	0.001083	0.00003187	23.38	0.0001779	0.0008879	0.0003344	-0.09662
Hazardous waste disposed (HWD)	Output	kg	0.2379	0.000103	0.0009968	0.0006141	0	0.1552	0.0001438	0.000022	0.1208	0.01195
Non hazardous waste dispose (NHWD)	Output	kg	5.97	0.05473	0.06741	0.3888	0.2985	18.62	0.07639	0.03004	0.5243	-1.119
Radioactive waste disposed (RWD)	Output	kg	0.001164	0.000007483	0.000005518	0.00008642	0	0.002164	0.00001044	0.000001146	0.000001057	-0.0002096
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.02149	0	0.2776	0	0	0.8958	0.00001623	-0.0002573
Materials for energy recovery (MER)	Output	kg	0	0	0.004635	0	0.0004408	0	0	0.1809	3.968E-7	-0.00003378
Exported electrical energy (EEE)	Output	MJ	0	0	0.006983	0	0.01707	0	0	0.2779	0.00002574	-0.00008683
Exported thermal energy (EET)	Output	MJ	0	0	0.1056	0	0.2583	0	0	4.205	0.0003895	-0.001314

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	498.8	1.14	7.216	12.59	0.06754	241.7	1.591	0.4789	0.4065	-52.78
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.004874	0.00000207	0.00000252	0.000017	1.175E-7	0.00132	0.000002889	3.95E-7	1.834E-7	-0.001024
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.3348	0.0002309	0.004259	0.01375	0.00002286	0.1383	0.0003222	0.0002621	0.0001594	-0.07202
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.2097	0.00003005	0.000203	0.0003163	0.5057	0.4894	0.00004194	0.00009518	0.00002203	-0.01794
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	43.79	0.07717	0.8152	0.8918	0.004828	17.7	0.1077	0.4726	0.04851	-4.119
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	43.69	0.07723	0.8156	0.8921	0.5106	18.27	0.1078	0.4728	0.04874	-4.204
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.1029	0.00002822	0.0001285	0.0004441	0.000001597	0.07303	0.00003938	0.0001554	0.0002057	-0.06735
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	44.17	0.07723	0.7702	0.8921	0.00483	18.23	0.1078	0.4727	0.05024	-4.003
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.005253	7.239E-7	0.0000181	0.000005691	3.964E-8	0.001273	0.00000101	0.000001373	0.000001133	-0.0004133
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0452	0.00004545	0.0008796	0.003307	0.000007562	0.0152	0.00006343	0.0000755	0.00006173	-0.005376
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.5072	0.0005082	0.009692	0.03683	0.00008187	0.1979	0.0007093	0.0008068	0.0004403	-0.06639
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1573	0.0001903	0.002553	0.009953	0.00002353	0.05322	0.0002656	0.0002097	0.0001774	-0.02041
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00001849	1.678E-8	1.195E-8	1.965E-7	1.019E-9	0.000001214	2.342E-8	3.689E-9	3.085E-9	-0.001885
Water (user) deprivation potential (WDP)	m3 world eqv.	2112	0.3718	1.176	8.34	0.0856	942.3	0.5189	4.887	3.436	-2001

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.446	0.004739	0.006242	0.05459	0.000289	4.384	0	0.006614	0.002404	0.001325	-0.2261
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002576	4.993E-9	5.751E-8	3.152E-8	3.37E-10	9.917E-7	0	6.963E-9	1.565E-9	2.894E-9	-3.458E-7
Potential Soil quality index (SQP)²	unitless	115.3	0.7812	1.529	6.076	0.04531	121.7	0	1.09	0.1078	0.9945	-9.987
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000002039	8.98E-10	9.997E-9	6.288E-9	1.14E-10	0.000001238	0	1.266E-9	4.538E-8	9.13E-10	-2.874E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	5.568E-8	0	2.28E-10	0	3E-12	5.255E-8	0	0	7.72E-10	1.13E-10	-1.082E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2345	0.9243	21.16	8.58	0.09008	1101	0	1.29	1.674	210.1	-413.8