Process Data set: Langfoss Maxi 27000 (en)

Process Data set: Langfoss Maxi 27000 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Langfoss Maxi 27000
Technical purpose of product or process	Langfoss Maxi is a powerful floodlight luminaire suitable for lighting large spaces, transport and storage areas, playgrounds, courts and car parks. Can also be used as facade lighting. Nordic design for Nordic conditions.The sloping top allows snow to slide off, and the bracket can withstand heavy loads. Asymmetrical optics send the light where it is needed, and the mounting bracket can be angled as required. Super simple installation with two-piece mounting bracket with hooks. Die-cast powder-coated aluminium with tempered glass front. Accessories for flexible installation: bracket for side mounting on post, corner bracket and extension cable. System Wattage: 192.0 W. Luminous flux: 24980lm. Efficacy: 130 lm/W. Colour temperature: 3000K. Colour rendering: Ra>70. MacAdams factor: SDCM: 3. Lifetime: L90/B50>50,000, . Light distribution: Asymmetric. Control/Dimming: On/Off. Luminiare class: Class I. Housing: Die-cast aluminium. Optics: Tempered glass. Height: 85.0mm. Length: 552.0 mm. Width: 443.0 mm. EAN: 7021986419207 The EPD also covers the following product: EAN: 7021986419436 - LANGFOSS MAXI 27000 4000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Langfoss Maxi 27000 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.940193920409 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-01-13 - 2030-01-13
Publication date	2025-01-13
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/langfoss-maxi/641920/pdf/specification_641920.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/701269_Langfoss%20Maxi/50/701269_Langfoss%20Maxi.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8680-8353_Langfoss-Maxi-27000.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-12T11:09:17
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	a0758002-c58e-4264-9c80-ef7ee1c639d9
Date of last revision	2025-01-10T13:22:17.0831753Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8680-8353
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	322.1	0.02228	5.16	1.017	0.007566	1.461E+4	0.128	0.5416	0.6154	-6.741
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	11.93	0	0	0	-11.93	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	334.1	0.02228	5.16	1.017	-11.92	1.461E+4	0.128	0.5416	0.6154	-6.741
Use of non renewable primary energy (PENRE)	Input	MJ	2336	1.969	51.27	89.49	0.4596	1.13E+3	11.31	3.371	2.494	-77.49
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	30.02	0	0	0	0	0	0	-36.21	0	0.006556
Total use of non renewable primary energy resource (PENRT)	Input	MJ	2366	1.969	51.27	89.49	0.4596	1.13E+3	11.31	-32.84	2.494	-77.48
Use of secondary material (SM)	Input	kg	8.026	0	0	0	0	0	0	0	0.013	0.04432
Use of renewable secondary fuels (RSF)	Input	MJ	1.81	0.0004358	0.004536	0.0335	0.0002509	11.47	0.002503	0.007708	0.003516	0.07303
Use of non renewable secondary fuels (NRSF)	Input	MJ	3.397	0.003701	0.0427	0.1795	0.001034	28.58	0.02125	-0.000329	0.1132	1.669
Use of net fresh water (FW)	Input	m3	1.891	0.0002202	0.1398	0.007694	0.0002168	109.1	0.001264	0.003315	0.002125	-0.03202
Hazardous waste disposed (HWD)	Output	kg	1.372	0.0001779	0.007083	0.004364	0	0.7243	0.001022	0.0001552	0.6967	-0.04064
Non hazardous waste dispose (NHWD)	Output	kg	39.71	0.09451	0.479	2.763	2.031	86.89	0.5428	0.211	3.65	-1.367
Radioactive waste disposed (RWD)	Output	kg	0.006324	0.00001292	0.00003921	0.0006141	0	0.0101	0.00007421	0.000007952	0.000006138	-0.0001752
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.1527	0	1.889	0	0	7.847	0.00002681	-0.001752
Materials for energy recovery (MER)	Output	kg	0	0	0.03294	0	0.0004432	0	0	0.2989	6.557E-7	-0.0002301
Exported electrical energy (EEE)	Output	MJ	0	0	0.04962	0	0.1161	0	0	0.4907	0.00004254	-0.0005705
Exported thermal energy (EET)	Output	MJ	0	0	0.7507	0	1.757	0	0	7.424	0.0006435	-0.008631

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	2366	1.969	51.27	89.48	0.4596	1128	11.31	3.37	2.492	-77.47
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.04471	0.000003574	0.00001791	0.0001208	7.995E-7	0.006162	0.00002053	0.000002577	0.000001121	-0.007637
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	1.794	0.0003986	0.03026	0.09768	0.0001556	0.6456	0.002289	0.001456	0.0009702	-0.3602
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-2.078	0.00005189	0.001442	0.002247	3.446	2.284	0.000298	0.0006704	0.0001736	-0.02167
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	201	0.1332	5.793	6.337	0.03285	82.63	0.7653	1.096	0.2057	-6.838
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	199.3	0.1333	5.795	6.339	3.479	85.25	0.7659	1.097	0.2071	-6.842
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.4077	0.00004872	0.000913	0.003156	0.00001086	0.3409	0.0002798	0.0009744	0.001151	0.01722
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	202.6	0.1333	5.473	6.339	0.03286	85.08	0.7658	1.097	0.2148	-7.747
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.02667	0.00000125	0.0001286	0.00004044	2.697E-7	0.005943	0.000007179	0.00001063	0.000006496	-0.002059
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.2236	0.00007848	0.00625	0.0235	0.00005145	0.07096	0.0004507	0.0003059	0.0002884	-0.02023
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	2.584	0.0008776	0.06887	0.2617	0.000557	0.9237	0.00504	0.003397	0.002773	-0.2745
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.7965	0.0003286	0.01814	0.07072	0.0001601	0.2484	0.001887	0.0009319	0.001063	-0.07968
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00002001	2.898E-8	8.49E-8	0.000001396	6.934E-9	0.000005666	1.664E-7	2.178E-8	2.006E-8	-0.003878
Water (user) deprivation potential (WDP)	m3 world eqv.	7546	0.642	8.356	59.26	0.5824	1.966E+5	3.687	32.72	22.73	768

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	7.987	0.008183	0.04435	0.3879	0.001966	20.46	0	0.04699	0.01733	0.008641	-0.1904
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.00001163	8.616E-9	4.086E-7	2.24E-7	2.295E-9	0.000004629	0	4.948E-8	9.675E-9	1.759E-8	-9.023E-7
Potential Soil quality index (SQP)²	unitless	680.8	1.349	10.86	43.18	0.3083	568.1	0	7.747	0.7743	5.761	-63.84
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.00001055	1.56E-9	7.104E-8	4.468E-8	7.7E-10	0.000005778	0	8.996E-9	3.13E-7	5.379E-9	-9.448E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	4.506E-7	0	1.629E-9	0	1.8E-11	2.453E-7	0	0	5.32E-9	6.48E-10	-2.11E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1.317E+4	1.596	150.3	60.96	0.6129	5139	0	9.166	7.014	1522	-2666