Close Go back Collapse all sections
Process Data set: DIESELPOWER LUBRICITY 25 LTR (en) en

Key Data Set Information
Location NO
Geographical representativeness description Global maritime market
Reference year 2025
Name
DIESELPOWER LUBRICITY 25 LTR
Use advice for data set This EPD covers the life cycle modules A1–A3 (raw material extraction, transport to factory, and production), module A4 (transport to storage and further to Norwegian port and Rotterdam). In addition, it includes module A5 (waste treatment of packaging), module C3 (product waste processing/biogenic carbon) and module D (reuse, recovery, recycling of potential of waste). In cases where the product does not contain biogenic carbon, the data in module C3 will be zero. The system boundaries are defined according to EN 15804+A2.
Technical purpose of product or process Unitor DieselPower Lubricity is an additive designed to restore lubricating properties in diesel and gas oils. It reduces friction-related wear in fuel injection equipment and can be used either as a stand-alone treatment or as a component in blended fuel-treatment packages. The product is compatible with conventional distillate fuel formulations and does not significantly affect water-separation characteristics as assessed by ASTM D1094. • Improves lubricity of low- and ultra-low-sulphur distillate fuels • Usable alone or in multi-component fuel-treatment packages • Effective at typical treat rates of 50–150 ppm to meet HFRR lubricity limits • Does not adversely affect fuel stability or water-separation characteristics
General comment on data set Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Biogenic carbon content
  • Carbon content (biogenic): 1.0 kg
  • Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until 2030
Time representativeness description 2025 - 2030-12-02
Technological representativeness
Technology description including background system Appearance: Yellow Density(kg/dm3): 0,895 Flash Point (C): > 61 Form: Liquid

Indicators of life cycle

IndicatorDirectionUnit Production
A1-A3
 Transport
A4
 Installation
A5
 Waste processing
C3
 Recycling Potential
D
Input
  • 4.094
  • 0.02208
  • 0.0006082
  • 0
  • -0.8177
Input
  • 0.4532
  • 0
  • -0.4532
  • 0
  • -0.2941
Input
  • 4.547
  • 0.02208
  • -0.4526
  • 0
  • -1.112
Input
  • 47.88
  • 0.8171
  • 0.03274
  • 0
  • -0.1281
Input
  • 0.09566
  • 0
  • -0.1257
  • 0
  • -0.03205
Input
  • 47.98
  • 0.8171
  • -0.09292
  • 0
  • -0.1602
Input
  • 0.06275
  • 0
  • 0
  • 0
  • -0.02399
Input
  • 0.01555
  • 0.00000206
  • 2.037E-7
  • 0
  • -0.009871
Input
  • 0.000453
  • 0
  • 0
  • 0
  • -5.533E-8
Input
  • 0.01845
  • 0.0001494
  • 0.000009855
  • 0
  • -0.002666
Output
  • 0.7233
  • 0.001582
  • 0.00008199
  • 0
  • -0.2139
Output
  • 22.03
  • 0.03353
  • 0.01494
  • 0
  • -0.5523
Output
  • 0.00003886
  • 0.00005535
  • 9.841E-9
  • 0
  • -0.000004643
Output
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0.002483
  • 0
  • 0.1218
  • 0
  • 0
Output
  • 5.6E-11
  • 0
  • 2.7E-11
  • 0
  • 0
Output
  • 7.725E-7
  • 0
  • 8.159E-7
  • 0
  • 0
Output
  • 0.000001318
  • 0
  • 0.000001844
  • 0
  • 0

IndicatorUnit Production
A1-A3
 Transport
A4
 Installation
A5
 Waste processing
C3
 Recycling Potential
D
Abiotic depletion potential - fossil resources (ADPF)
  • 67.04
  • 0.817
  • 0.03274
  • 0
  • -0.1792
Abiotic depletion potential - non-fossil resources (ADPE)
  • 0.0000391
  • 1.101E-7
  • 7.72E-9
  • 0
  • -0.000007829
Acidification potential, Accumulated Exceedance (AP)
  • 0.01461
  • 0.0004818
  • 0.000009276
  • 0
  • -0.001339
Global Warming Potential - biogenic (GWP-biogenic)
  • -0.03693
  • 0.0001057
  • 0.05177
  • 0
  • 0.02802
Global Warming Potential - fossil fuels (GWP-fossil)
  • 3.506
  • 0.06475
  • 0.00535
  • 0
  • -0.2438
Global Warming Potential - total (GWP-total)
  • 3.471
  • 0.06491
  • 0.05713
  • 0
  • -0.2161
Global Warming Potential - land use and land use change (GWP-luluc)
  • 0.002017
  • 0.00005985
  • 8.206E-7
  • 0
  • -0.0002827
  • 3.511
  • 0.06483
  • 0.005352
  • 0
  • -0.2445
Eutrophication potential - freshwater (EP-freshwater)
  • 0.0008656
  • 0.000005321
  • 2.068E-7
  • 0
  • -0.00008296
Eutrophication potential - marine (EP-marine)
  • 0.003139
  • 0.0002135
  • 0.000004139
  • 0
  • -0.0002458
Eutrophication potential - terrestrial (EP-terrestrial)
  • 0.0299
  • 0.002333
  • 0.00003755
  • 0
  • -0.002649
Photochemical Ozone Creation Potential (POCP)
  • 0.01433
  • 0.0006824
  • 0.0000139
  • 0
  • -0.0008646
Depletion potential of the stratospheric ozone layer (ODP)
  • 1.181E-7
  • 1.293E-9
  • 4.7E-11
  • 0
  • -2.947E-9
Water (user) deprivation potential (WDP)
  • 1.791
  • 0.00496
  • 0.000715
  • 0
  • -0.09049

IndicatorUnit Production
A1-A3
 Transport
A4
 Installation
A5
 Waste processing
C3
 Recycling Potential
D
1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
2The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP) 1
  • 0.1571
  • 0.002026
  • 0.00004359
  • 0
  • -0.01863
Potential incidence of disease due to PM emissions (PM) 2
  • 1.905E-7
  • 1.939E-9
  • 1.94E-10
  • 0
  • -1.952E-8
Potential Soil quality index (SQP) 2
  • 20.12
  • 0.5358
  • 0.01903
  • 0
  • -3.878
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc) 2
  • 4.108E-8
  • 1.29E-10
  • 4.8E-11
  • 0
  • -4.527E-9
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c) 2
  • 3.76E-8
  • 0
  • 0
  • 0
  • -3.27E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw) 2
  • 35.6
  • 0.08432
  • 0.01167
  • 0
  • -0.9959