| Key Data Set Information | |
| Location | DE |
| Geographical representativeness description | Europe. |
| Reference year | 2024 |
| Name |
|
| Technical purpose of product or process | For industrial zones with air polluting processes. Displacement flow diffusers with bell-shaped, low turbulence air discharge in cooling mode. For more information see: https://www.trox.de/en/industrial-diffusers/qsh-9ac93b508a3ca7df. Type QSH displacement flow diffusers are used primarily for industrial zones with air polluting work processes. Bell-shaped air discharge in cooling mode, vertical air discharge in heating mode. Low-turbulence displacement of polluted or contaminated air in the occupied zone. For variable and constant volume flows. For supply air to room air temperature differences from –8 to +12 K. Installation at heights between 3.5 m and 10 m, either free hanging or on walls or pillars. Installation preferably outside of occupied zones, e.g. in corridors. Ideal for use with TDC temperature difference control module. This EPD includes the environmental data of the product series QSH. The following represents a representative dataset of the most sold variant in the declared sales year (QSH-B-250-W00). |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Energy, water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | "2024-11-19" - "2029-11-19" |
| Technological representativeness | |
| Technology description including background system | Nominal sizes: 250, 355, 450, 560 mm. Minimum volume flow rate: 205 – 785 l/s or 738 – 2826 m³/h. Maximum volume flow rate, with LWA = 55 dB(A): 410 – 1570 l/s or 1476 – 5652 m³/h. Supply air to room air temperature difference: –8 to +12 K. The distribution of materials in the products is approximately the same; only the total weight varies. The EPD is created for QSH-B-250-W00. The factors in the table below can be used to scale LCA data for a new dimension. |
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-11-22T12:27:32 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 99701a32-30f6-488e-b757-318bb08e6f1d |
| Date of last revision | 2024-11-12T10:29:48.9242437Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-8075-7774 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Indicators of life cycle