Process Data set: Tysnes 66 Pro1500 4000K (en)

Process Data set: Tysnes 66 Pro1500 4000K (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Tysnes 66 Pro1500 4000K
Technical purpose of product or process	Tysnes 66 Pro is a very efficient, robust version in the Tysnes 66 family. With 171lm/W, very high light output (9430lm) and long lifetime (100.000h, L90/B10) it is the project winner for storage rooms, garages, and parking facilities. The luminaire is produced from impact-resistant UV stabilized polycarbonate (IK08), and the components can withstand vibrations and very low temperatures (-40°C). It can easily be mounted on ceilings with clips or suspended in wires. Sturdy steel clips attached to the luminaire holds the diffuser. It has cable entries in both ends and weakening for cabling from the back. 5-pole (On/Off) or 7-pole (DALI) terminal block with 5 x 2,5 mm² through wiring gives flexibility for larger installations. System Wattage: 55.0 W. Luminous flux: 9430lm lm. Efficacy: 171 lm/W. Colour temperature: 4000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L90/B10>100,000, L90>50,000. Light distribution: Direct. Control/Dimming: DALI-2. Luminiare class: Class I. Housing: UV-stabilized polycarbonate. Optics: UV-stabilized polycarbonate. Height: 80.0mm. Length: 1500.0 mm. Width: 85.0 mm. EAN: 7021981200534 The EPD also covers the following products: EAN: 7021981200510 - TYSNES 66 PRO 1500 4000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Tysnes 66 Pro1500 4000K - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.06455101328 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025 - 2030-11-14
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/int/en/pdf/article/120053/703335/specification_120053.pdf Link to CE Declaration: https://www.sg-as.com/file/techfile/0OLP/Tynes%2066%20Pro.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-14061-14383_Tysnes-66-Pro1500-4000K.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-11-18T17:39:46
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	953c5fc3-2ada-416c-9481-deb5033074f9
Date of last revision	2025-11-13T09:20:39.6957569Z
Data set version	00.02.002
Registration authority	EPD Norway
Registration number	NEPD-14061-14383
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	40.96	0.00382	9.526	0.1627	0.0005186	1.304E+4	0.0195	0.1778	0.1029	-9.69
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.9318	0	0	0	-0.9304	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	41.89	0.00382	9.526	0.1627	-0.9299	1.304E+4	0.0195	0.1778	0.1029	-9.69
Use of non renewable primary energy (PENRE)	Input	MJ	382.1	0.3375	0.7366	14.33	0.0315	1008	1.723	1.435	0.4472	-22.11
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	31.56	0	0	0	0	0	0	-33.35	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	413.7	0.3375	0.7366	14.33	0.0315	1008	1.723	-31.91	0.4472	-22.11
Use of secondary material (SM)	Input	kg	0.7587	0	0	0	0	0	0	0	0.002332	0.03775
Use of renewable secondary fuels (RSF)	Input	MJ	0.5374	0.00007471	0.007481	0.005258	0.0000172	10.24	0.0003815	0.003302	0.0004765	0.01601
Use of non renewable secondary fuels (NRSF)	Input	MJ	1.09	0.0006344	0.01864	0.02865	0.00007091	25.5	0.003239	-0.00007787	0.02047	-0.02932
Use of net fresh water (FW)	Input	m3	0.3118	0.00003774	0.07115	0.00125	0.00001486	97.36	0.0001927	0.002513	0.0003806	-0.02517
Hazardous waste disposed (HWD)	Output	kg	0.1492	0.0000305	0.0004723	0.0007273	0	0.6463	0.0001557	0.0000394	0.1147	-0.008215
Non hazardous waste dispose (NHWD)	Output	kg	4.782	0.0162	0.05666	0.4542	0.1392	77.54	0.08272	0.05431	0.7754	-0.4649
Radioactive waste disposed (RWD)	Output	kg	0.0009704	0.000002215	0.000006586	0.00009811	0	0.009012	0.00001131	0.000002026	0.0000013	-0.00005921
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0	0	0.1295	0	0	0.5446	0.00005496	-0.001477
Materials for energy recovery (MER)	Output	kg	0	0	0	0	0.0009929	0	0	0.6133	0.000001344	-0.0001945
Exported electrical energy (EEE)	Output	MJ	0	0	0	0	0.007962	0	0	0.9418	0.0000872	-0.0004766
Exported thermal energy (EET)	Output	MJ	0	0	0	0	0.1205	0	0	14.25	0.001319	-0.007211

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	413.2	0.3375	0.7355	14.33	0.0315	1006	1.723	1.435	0.4468	-22.11
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.01058	6.127E-7	0.000004018	0.00001966	5.481E-8	0.005498	0.000003128	8.82E-7	1.968E-7	-0.002021
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.2994	0.00006833	0.000421	0.01503	0.00001066	0.5761	0.0003489	0.0008072	0.000173	-0.107
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.08206	0.000008894	0.00149	0.0003607	0.2345	2.038	0.00004541	0.001229	0.0004809	-0.004611
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	33.84	0.02284	0.05388	1.012	0.002252	73.73	0.1166	1.568	0.09532	-1.861
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	33.8	0.02286	0.05559	1.013	0.2367	76.07	0.1167	1.569	0.09601	-1.871
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.04828	0.000008351	0.0002223	0.000498	7.447E-7	0.3041	0.00004264	0.0002648	0.0002058	-0.005009
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	34.03	0.02286	0.05548	1.013	0.002253	75.92	0.1167	1.569	0.09601	-1.801
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.004288	2.143E-7	0.000003875	0.0000066	1.849E-8	0.005303	0.000001094	0.000004651	0.000001135	-0.0006407
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.03678	0.00001345	0.00004627	0.003609	0.000003527	0.06332	0.00006869	0.0002387	0.0001186	-0.00568
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.4704	0.0001504	0.0006023	0.04019	0.00003818	0.8242	0.0007681	0.002538	0.0004933	-0.07799
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1391	0.00005633	0.000162	0.01089	0.00001097	0.2216	0.0002876	0.0006485	0.0002034	-0.02273
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00001672	4.974E-9	3.695E-9	2.229E-7	4.76E-10	0.000005056	2.536E-8	9.68E-9	3.722E-9	-0.006068
Water (user) deprivation potential (WDP)	m3 world eqv.	837.4	0.11	2.868	9.256	0.03992	3925	0.5619	11.09	2.74	-25.46

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.228	0.001403	0.01334	0.06198	0.0001348	18.26	0	0.007162	0.006629	0.001408	-0.06879
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002056	1.474E-9	3.018E-9	3.715E-8	1.57E-10	0.00000413	0	7.54E-9	4.814E-9	3.229E-9	-2.801E-7
Potential Soil quality index (SQP)²	unitless	121.4	0.2312	0.3704	7.052	0.02113	506.9	0	1.181	0.3001	1.269	-23.13
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000002076	2.7E-10	3.768E-9	7.357E-9	5.2E-11	0.000005156	0	1.371E-9	8.434E-8	9.08E-10	-4.348E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	5.548E-8	0	1.6E-10	0	1E-12	2.189E-7	0	0	1.45E-9	1.08E-10	-7.885E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2.49E+3	0.2736	3.351	9.85	0.04201	4585	0	1.397	5.124	99.03	-823.9