Process Data set: IFSI-EMC Pure 1kV 4x4/4mm² ER (en)

Process Data set: IFSI-EMC Pure 1kV 4x4/4mm² ER (en) en

Process information

Key Data Set Information
Location	FI
Geographical representativeness description	Norway
Reference year	2024
Name	IFSI-EMC Pure 1kV 4x4/4mm² ER
Technical purpose of product or process	IFSI-EMC PURE 1KV CU Power cable with up to 1 kV operating voltage. Allowed indoors, outdoors and as a ground cable without extra protection. The Cu screen is 100% tight, has low coupling impedance and meets the EMC directive. The 3-conductor is symmetrically constructed and has a CU screen from 1.5mm². Halogen-free cable is recommended used when it is important to avoid the formation of dense smoke and corrosive gases in the event of an overheating or fire. Cables with AAL screen has a construction with an AL-foil in contact with a massive CU wire. The AL foil has an longitudinal slit and is not 100% covering (slit does not exceed 4mm). When applied to installation with highly sensitive equipment use IFSI-EMC Pure with CU screen. Conductor: Class 1 Round, solid copper Conductor surface Bare Core insulation material: XLPE Armouring/reinforcement material: Copper, bare Screen construction: Metallized foil Screen: Yes Screen material Copper, bare Concentric conductor: Copper Material inner sheath: Halogen-free polymer Material outer sheath: Halogen-free polymer Cable shape: Round Core colours 4X: Blue, brown, black, grey
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Prysmian Group Norge AS
Quantitative reference
Reference flow(s)	IFSI-EMC Pure 1kV 4x4/4mm² ER - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 6.94056603E-4 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-06-19" - "2029-06-19"
Publication date	2024-06-19
Technological representativeness
Technology description including background system	IFSI-EMC Pure 1kV 4x4/4mm² ER SAP code 20216059 El no. 1003827 STANDARDS APPLIED: IEC 60502-1 EN 50575:2014+A1:2016 EN 13501-6, class Cca-s1,d1,a1

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-6925-6312_IFSI-EMC-Pure-1kV-4x4-4mm--ER%281%29.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-12-07T15:05:25
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	8a911e18-70e4-4a3a-a472-fd302d7bf08f
Date of last revision	2024-06-18T10:41:06.2770993Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-6925-6312
Owner of data set	Prysmian Group Norge AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	3.159	0.01615	0.3503	0.0232	0.0711	26.35	0	0.003989	0.001698	0.004224	-1.405
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.02078	0	0	0	0.00002016	0	0	0	-0.01977	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	3.18	0.01615	0.3503	0.0232	0.07112	26.35	0	0.003989	-0.01807	0.004224	-1.405
Use of non renewable primary energy (PENRE)	Input	MJ	15.09	1.458	4.474	1.644	0.455	2.038	0	0.2827	0.03173	0.04589	-0.59
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	3.935	0	0	0	0.008458	0	-0.02826	0	-3.484	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	19.03	1.458	4.474	1.644	0.4634	2.038	-0.02826	0.2827	-3.452	0.04589	-0.59
Use of secondary material (SM)	Input	kg	0.03681	0	0.0007112	0	0.0007503	0	0	0	0	0	0.0127
Use of renewable secondary fuels (RSF)	Input	MJ	0.07011	0.0005402	0.0002907	0.0008305	0.001438	0.0207	0	0.0001428	0.00003693	0.00008766	0.000989
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.004981	0.001607	0.0003458	0.002965	0.0001998	0.05156	0	0.0005097	0	0.00008974	-0.07146
Use of net fresh water (FW)	Input	m3	0.06247	0.0001211	0.001585	0.0001732	0.001293	0.1968	0	0.00002977	0.000253	0.00005848	-0.002567
Hazardous waste disposed (HWD)	Output	kg	0.007748	0.00006839	0.004156	0.00008386	0.0003919	0.001307	0	0.00001442	0	0.007537	-0.0005013
Non hazardous waste dispose (NHWD)	Output	kg	0.3526	0.04387	0.02254	0.07859	0.01334	0.1568	0	0.01351	0	0.1694	-0.0257
Radioactive waste disposed (RWD)	Output	kg	0.00005584	0.00001003	0.00007608	0.00001121	0.00000307	0.00001822	0	0.000001928	0	3.146E-7	-0.000001495
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.02217	0	0.002433	0	0	0	0.09949	0.000008929	-0.0004972
Materials for energy recovery (MER)	Output	kg	0	0	0.01865	0	0.00245	0	0	0	0.1039	2.184E-7	-0.00006546
Exported electrical energy (EEE)	Output	MJ	0	0	0.01247	0	0.003475	0	0	0	0.1613	0.00001417	-0.0001604
Exported thermal energy (EET)	Output	MJ	0	0	0.1886	0	0.05258	0	0	0	2.44	0.0002143	-0.002427

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	18.9	1.458	4.474	1.644	0.5312	2.035	0.2827	0.03161	0.04589	-0.5901
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0003353	0.000001898	6.196E-7	0.000002954	0.000006817	0.00001112	5.078E-7	2.454E-8	1.536E-8	-0.00004098
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.04348	0.001751	0.0001543	0.0004458	0.000918	0.001165	0.00007663	0.0000511	0.00001556	-0.007408
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.01322	0.00003557	0.001877	0.00004446	0.0005317	0.004121	0.000007644	0.009248	0.002158	-0.0002311
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	1.201	0.103	0.02059	0.109	0.0338	0.1491	0.01875	0.2435	0.01238	-0.05756
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	1.216	0.103	0.02249	0.1091	0.03436	0.1538	0.01876	0.2528	0.01454	-0.05833
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.001263	0.00004827	0.00002825	0.00003812	0.00002759	0.0006149	0.000006553	9.074E-7	6.096E-7	-0.0005331
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	1.214	0.103	0.02212	0.1091	0.03425	0.1535	0.01876	0.2488	0.01503	-0.03505
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0003719	6.338E-7	7.135E-7	8.563E-7	0.000007483	0.00001072	1.472E-7	4.401E-8	2.926E-8	-0.00005039
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.002889	0.000464	0.00004831	0.0001322	0.00007157	0.000128	0.00002273	0.00002441	0.00002012	-0.0003375
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.04185	0.005148	0.000539	0.001462	0.0009863	0.001666	0.0002514	0.0002514	0.00006194	-0.005055
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.01097	0.001361	0.0001282	0.0004476	0.0002597	0.0004481	0.00007696	0.00006059	0.00002059	-0.001375
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	7.783E-8	2.236E-8	1.878E-8	2.486E-8	2.898E-9	1.022E-8	4.274E-9	4.9E-10	5.9E-10	-0.001031
Water (user) deprivation potential (WDP)	m3 world eqv.	65.61	0.9601	2.15	1.569	1.425	354.7	0.2697	0.2066	0.7806	-0.142

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.06336	0.006333	0.1975	0.007188	0.005493	0	0	0	0	0	0.03692	0	0	0.001236	0.00007762	0.0002638	-0.001774
Potential incidence of disease due to PM emissions (PM)²	disease incidence	1.272E-7	5.469E-9	2.283E-9	7.85E-9	2.866E-9	0	0	0	0	0	8.35E-9	0	0	1.35E-9	2.26E-10	2.89E-10	-2.164E-8
Potential Soil quality index (SQP)²	unitless	10.4	0.6868	1.655	1.134	0.2802	0	0	0	0	0	1.025	0	0	0.1949	0.005629	0.1272	-2.204
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	6.89E-7	1.114E-9	8.32E-10	1.308E-9	1.386E-8	0	0	0	0	0	1.042E-8	0	0	2.25E-10	5.9E-10	5.3E-11	-8.217E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	9.462E-9	0	3.3E-11	0	1.9E-10	0	0	0	0	0	4.42E-10	0	0	0	1.3E-11	3E-12	-9.65E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	500.8	0.9793	1.6	1.211	10.92	0	0	0	0	0	9.27	0	0	0.2082	0.4543	41.1	-68.16