Process Data set: Inspire 1500 Prism Sensor (en)

Process Data set: Inspire 1500 Prism Sensor (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2024
Name	Inspire 1500 Prism Sensor
Technical purpose of product or process	Inspire Prism 1500 has a slim, modern design with powder-coated white or black outer surface. Direct light with prismatic, glare-free optics made of PMMA, combined with indirect light with a wide beam angle, gives an efficient light perfectly suited for offices and above desks. 2,5m cable and wireset for ceiling/T-profile fixing is included. Different control options are available; phase cut, pull-dim, Dali or SG Connect. If you want to position several luminaires in a row, the luminaires can easily be connected together with the supplied coupling piece or the flexible corner (accessory). Wattage: 34W. System Voltage: 220-240V Luminous flux: 4510lm. Efficacy: 133 lm/W. Colour temperature: 3000K. Colour rendering (CRI): Ra>80. MacAdams factor: SDCM: 3. Lifetime: L90/B10>100,000, L96>50,000. Light distribution: Direct/Indirect. Optic: Prism Optic. Control/Dimming type: PIR Sensor. Luminaire class: Class I. IP Class: IP20. Contains light source of energy class: D. Housing: Aluminium. Optics: Polycarbonat (PC). Length (mm): 1465. Width (mm): 38. Height (mm): 67. EAN: 7021982128691. The EPD also covers the following products: EAN: 7021982128714 - INSPIRE 1500 BLACK PRISM 3000K PIR EAN: 7021982128738 - INSPIRE 1500 WHITE PRISM 4000K PIR EAN: 7021982128752 - INSPIRE 1500 BLACK PRISM 4000K PIR Please note that the above has been calculated with the Norwegian energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Inspire 1500 Prism Sensor - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.19444444446 kg
Time representativeness
Data set valid until	2029
Time representativeness description	2024-11-26 - 2029-11-26
Publication date	2024-11-26
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/inspire-prism/212869/pdf/specification_212869.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8230-7901_Inspire-1500-Prism-Sensor.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-01-23T23:32:30
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	884b0638-2270-4aea-9e37-dd9a6abe8810
Date of last revision	2024-11-22T14:08:18.1056998Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8230-7901
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	74.57	0.01198	0.9632	0.2579	0.001565	4784	0.03841	0.1774	0.1405	-15.54
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	2.457	0	0	0	-2.457	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	77.02	0.01198	0.9632	0.2579	-2.455	4784	0.03841	0.1774	0.1405	-15.54
Use of non renewable primary energy (PENRE)	Input	MJ	632.4	1.058	11.84	22.71	0.09505	369.9	2.683	1.298	0.5709	-54.77
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	13.32	0	0	0	0	0	0	-15.09	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	645.7	1.058	11.84	22.71	0.09505	369.9	2.683	-13.79	0.5709	-54.77
Use of secondary material (SM)	Input	kg	1.242	0	0	0	0	0	0	0	0.002824	0.06665
Use of renewable secondary fuels (RSF)	Input	MJ	0.3772	0.0002342	0.0005331	0.008333	0.0000519	3.757	0.001374	0.003116	0.0009063	0.03863
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.2075	0.001989	0.005812	0.0454	0.000214	9.359	0.004913	-0.00007889	0.02452	0.9476
Use of net fresh water (FW)	Input	m3	0.488	0.0001183	0.007383	0.00198	0.00004485	35.73	0.0002869	0.001403	0.0005079	-0.07713
Hazardous waste disposed (HWD)	Output	kg	0.375	0.00009562	0.0009867	0.001153	0	0.2372	0.0001384	0.00004059	0.1557	-0.003816
Non hazardous waste dispose (NHWD)	Output	kg	9.049	0.05079	0.1232	0.7198	0.42	28.46	0.1305	0.0567	0.8678	-1.382
Radioactive waste disposed (RWD)	Output	kg	0.001512	0.000006944	0.000023	0.0001555	0	0.003308	0.00001828	0.000002134	0.000001829	-0.0001653
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.06084	0	0.3907	0	0	1.885	0.00001767	-0.002608
Materials for energy recovery (MER)	Output	kg	0	0	0.005734	0	5.718E-7	0	0	0.197	4.321E-7	-0.0003434
Exported electrical energy (EEE)	Output	MJ	0	0	0.008809	0	0.02402	0	0	0.3026	0.00002803	-0.0008415
Exported thermal energy (EET)	Output	MJ	0	0	0.1333	0	0.3634	0	0	4.579	0.0004241	-0.01273

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	641.2	1.058	11.84	22.7	0.09505	369.4	2.683	1.297	0.5705	-54.77
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.006888	0.000001921	0.000003039	0.00003115	1.654E-7	0.002018	0.000004902	7.857E-7	2.48E-7	-0.002118
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.5094	0.0002142	0.006673	0.02381	0.00003217	0.2114	0.00051	0.0005907	0.0002193	-0.1429
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.1488	0.00002789	0.0002023	0.0005716	0.713	0.7481	0.00007345	0.0002604	0.00002645	-0.01519
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	55.69	0.07161	1.303	1.604	0.006794	27.06	0.1774	0.5842	0.05984	-4.686
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	55.66	0.07167	1.303	1.605	0.7198	27.92	0.1776	0.5847	0.06012	-4.745
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.1185	0.00002618	0.000142	0.0007892	0.000002247	0.1116	0.00006316	0.0002823	0.0002505	-0.04401
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	56.34	0.07167	1.242	1.605	0.006796	27.86	0.1776	0.5846	0.06259	-5.03
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.007015	6.718E-7	0.00002363	0.00001046	5.578E-8	0.001946	0.000001418	0.000004407	0.000001436	-0.0008893
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.06155	0.00004218	0.001555	0.00572	0.00001064	0.02324	0.0001009	0.0001355	0.00008156	-0.008788
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.7064	0.0004716	0.01714	0.06369	0.0001152	0.3025	0.001129	0.001481	0.0006395	-0.1152
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.2231	0.0001766	0.006461	0.01726	0.00003311	0.08135	0.0004324	0.0003941	0.0002444	-0.03551
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000003471	1.557E-8	4.791E-8	3.533E-7	1.434E-9	0.000001856	4.019E-8	7.647E-9	4.679E-9	-0.002088
Water (user) deprivation potential (WDP)	m3 world eqv.	2343	0.345	1.105	14.67	0.1205	6.439E+4	2.595	10.45	6.276	-1198

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.834	0.004398	0.0171	0.09824	0.0004067	6.701	0	0.01173	0.006351	0.002138	-0.1806
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000003591	4.63E-9	7.828E-8	5.888E-8	4.75E-10	0.000001516	0	1.086E-8	3.86E-9	3.953E-9	-4.927E-7
Potential Soil quality index (SQP)²	unitless	179.3	0.725	2.304	11.18	0.06376	186	0	1.877	0.2754	1.33	-20.79
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000004078	8.4E-10	5.686E-8	1.166E-8	1.59E-10	0.000001892	0	2.173E-9	8.522E-8	1.234E-9	-6.452E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.087E-7	0	3.6E-10	0	4E-12	8.032E-8	0	0	1.45E-9	1.42E-10	-1.882E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	3946	0.8578	29.48	15.61	0.1268	1683	0	1.989	3.053	4.1E+2	-1064