Process Data set: Mapetard R (en) - EPD Global Digi Node

Process Data set: Mapetard R (en) en

Process information

Key Data Set Information
Location	NO
Geographical representativeness description	Nordic & Baltic countries
Reference year	2025
Name	Mapetard R
Use advice for data set	The approach is “cradle to gate” (A1–A3) with module A4. The product is exempt from declaring modules C and D according to the PCR. The production process starts from raw materials, that are purchased from external and intercompany suppliers and stored in the plant. Bulk raw materials are stored in specific silos and added automatically in the production mixer, according to the formula of the product. Other raw materials, supplied in bags, big bags or tanks, are stored in the warehouse and added automatically or manually in the mixer. The production is a discontinuous process, in which all the components are mechanically mixed in batches. The quality of final products is controlled before the sale.
Technical purpose of product or process	Mapetard R is a set retarding admixture based on sodium gluconate, used to control the setting of concrete. It is normally used in combination with other admixtures, e.g. Dynamon or Mapeplast. Mapetard R is used for concrete subjected to longer transportation times, for complicated casting procedures, or where a cast without joints is desirable despite interruptions in the casting work. Mapetard R is available in 25 liter cans, 200 liter drums, 1000 liter IBC containers and in tank. For more information see the TDS (Technical Data Sheet) on Mapei website (www.mapei.com).
Classification	Class name : Hierarchy level EPDNorge: Construction / Technical-chemical building materials products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Mapei S.p.A
Quantitative reference
Reference flow(s)	Mapetard R - 1.0 * 1.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-03-31 - 2030-03-31
Publication date	2025-03-31
Technological representativeness
Technology description including background system	The product is compliant with EN 934-2 “Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling”.

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 009:2021 Part B for Technical - Chemical products for building and construction industry

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 009:2021 Part B for Technical - Chemical products for building and construction industry

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-9028-9028-1_Mapetard-R.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-05-07T12:32:58
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	84935217-007f-4457-b4fa-45bcb5467b84
Date of last revision	2025-03-27T16:13:50.7781288Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-9028-9028-1
Owner of data set	Mapei S.p.A
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	3.442	0.01061	0.005297	0.008778	0.005443	0.007945	0.0006379	-0.006349
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	-0.06354	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	3.442	0.01061	-0.05824	0.008778	0.005443	0.007945	0.0006379	-0.006349
Use of non renewable primary energy (PENRE)	Input	MJ	4.033	0.741	0.02772	0.09889	0.3197	0.01544	0.04145	-0.02862
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	0.384	0	0	0	0	0	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	4.417	0.741	0.02772	0.09889	0.3197	0.01544	0.04145	-0.02862
Use of secondary material (SM)	Input	kg	0	0	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.01435	0.0003795	0.0003757	0.000618	0.0001964	0	0.00001318	-0.0001298
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.006405	0.001357	0.00009295	0.0001468	0.0007135	0	0.0000379	-0.0001334
Use of net fresh water (FW)	Input	m3	0.007905	0.00007924	0.0001634	0.00003998	0.00003809	0.00002644	0.00004938	-0.0009959
Hazardous waste disposed (HWD)	Output	kg	0.02197	0.00003821	0.000004076	0.000008209	0.0000177	0.000001542	0	-0.000006535
Non hazardous waste dispose (NHWD)	Output	kg	0.1016	0.03603	0.004592	0.0002134	0.01262	0.00004872	0.3	-0.0001982
Radioactive waste disposed (RWD)	Output	kg	0.00001679	0.000005047	1.915E-7	6.952E-7	0.000002157	1.632E-7	0	-2.15E-7
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.008389	0	0.004185	0	0	0.7	0	0
Materials for energy recovery (MER)	Output	kg	0.00964	0	0.0003146	0	0	0	0	0
Exported electrical energy (EEE)	Output	MJ	0.0005676	0	0.0002574	0	0	0	0	0
Exported thermal energy (EET)	Output	MJ	0.008588	0	0.003894	0	0	0	0	0

Core environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	4.416	0.7409	0.02768	0.09882	0.3197	0.01544	0.04145	-0.02711
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00001438	0.000001354	1.225E-8	2.169E-8	7.727E-7	6.308E-9	1.137E-8	-1.423E-7
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.00333	0.0001408	0.000007876	0.00005424	0.00006153	0.000004023	0.00001254	-0.00001443
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.001053	0.00002028	0.007866	0.00001566	0.000009905	0.000004294	0.000001093	-0.00003197
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	0.3244	0.049	0.00136	0.00612	0.02141	0.000497	0.001285	-0.001603
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.3258	0.04904	0.00923	0.00614	0.02143	0.000504	0.001286	-0.001636
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0002885	0.00001744	0.000003006	0.000005247	0.000009261	6.878E-7	2.519E-7	-0.000001083
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.3212	0.04904	0.001466	0.006296	0.02143	0.0004977	0.001286	-0.001714
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.00002232	3.915E-7	1.375E-7	2.41E-7	1.963E-7	3.141E-8	9.588E-9	-4.26E-8
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.001008	0.00002787	0.000001074	0.00002005	0.00001165	0.000001179	0.000004701	-0.000005003
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.01121	0.0003117	0.00001306	0.0002194	0.0001308	0.00001358	0.0000518	-0.00005879
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.0009955	0.0001194	0.000003363	0.00006065	0.00004995	0.000003637	0.00001482	-0.00001552
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	5.878E-8	1.11E-8	1.25E-10	1.044E-9	4.7E-9	9.8E-11	6.26E-10	-2.92E-10
Water (user) deprivation potential (WDP)	m3 world eqv.	16.17	0.7166	0.4429	0.6694	0.3824	1.704	0.08726	-1.271

Additional environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.01663	0.003238	0.0002406	0.0006232	0.001398	0.000259	0.0001799	-0.0002488
Potential incidence of disease due to PM emissions (PM)²	disease incidence	2.648E-8	3E-9	2.5E-11	5.098E-9	1.2E-9	6.4E-11	2.67E-10	-3.07E-10
Potential Soil quality index (SQP)²	unitless	7.46	0.5183	0.007137	0.01725	0.1901	0.008729	0.1511	0.06154
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	8.813E-9	6E-10	2.1E-11	5.8E-11	3E-10	1E-11	1.2E-11	-3.4E-11
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	3.25E-10	0	1E-12	2E-12	0	1E-12	1E-12	-1E-12
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	9.425	0.5492	0.02014	0.06075	0.2493	0.01094	0.0205	-0.02791