Close Go back Collapse all sections
Process Data set: SEACARE OSD-2 25 LTR (en) en

Key Data Set Information
Location NO
Geographical representativeness description Global maritime market
Reference year 2025
Name
SEACARE OSD-2 25 LTR
Use advice for data set This EPD covers the life cycle modules A1–A3 (raw material extraction, transport to factory, and production), module A4 (transport to storage and further to Norwegian port). In addition it includes module A5 (waste treatment of packaging), module C3 (product waste processing/biogenic carbon) and module D (reuse, recovery, recycling of potential of waste). In cases where the product does not contain biogenic carbon, the data in module C3 will be zero. The system boundaries are defined according to EN 15804+A2.
Technical purpose of product or process Seacare OSD-2 is a biodegradable hydrocarbon-based Type I oil spill dispersant with high dispersing efficiency and low toxicity, approved as a Type I dispersant according to LR448 specifications by the UK Department for Environment, Food & Rural Affairs (DEFRA). It is intended primarily for undiluted use on sea, beaches and rocks, where permitted, to disperse mineral oils, crude oils, residual fuel oils, diesel fuel oil, kerosene, white spirit and lubricant oils. The product is suitable for treating oil spills during loading or discharging of cargo or bunkers, and for cleaning spills on decks, ship sides, piers and wharfs where local regulations allow. • Approved Type I dispersant according to LR448 specifications by DEFRA, covering efficiency and toxicity requirements • Disperses mineral oils, crude oils, residual fuel oils, diesel fuel oil, kerosene, white spirit and lubricant oils • Intended for undiluted use on oil spills in marine and coastal environments, including sea, beaches and rocks, where permitted by local regulations • Can be used to clean spills on decks, ship sides, piers and wharfs where allowed
General comment on data set Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Biogenic carbon content
  • Carbon content (biogenic): 1.0 kg
  • Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until 2030
Time representativeness description 2025 - 2030-12-03
Technological representativeness
Technology description including background system Appearance: Amber Density: 0,8 g/ml Form: Liquid Flash Point: > 61 °C

Indicators of life cycle

IndicatorDirectionUnit Production
A1-A3
 Transport
A4
 Installation
A5
 Waste processing
C3
 Recycling Potential
D
Input
  • 13.96
  • 0.02223
  • 0.0006494
  • 0
  • -0.8626
Input
  • 0.4777
  • 0
  • -0.4777
  • 0
  • -0.3099
Input
  • 14.44
  • 0.02223
  • -0.477
  • 0
  • -1.173
Input
  • 21.47
  • 0.8227
  • 0.03472
  • 0
  • -0.1443
Input
  • 31.62
  • 0
  • -0.1479
  • -31.5
  • -0.03856
Input
  • 53.1
  • 0.8227
  • -0.1131
  • -31.5
  • -0.1828
Input
  • 0.06605
  • 0
  • 0
  • 0
  • -0.02529
Input
  • 0.01647
  • 0.000002074
  • 2.191E-7
  • 0
  • -0.01041
Input
  • 0.0004561
  • 0
  • 0
  • 0
  • -6.359E-8
Input
  • 0.009664
  • 0.0001504
  • 0.00001114
  • 0
  • -0.002814
Output
  • 0.6839
  • 0.001592
  • 0.00009473
  • 0
  • -0.2255
Output
  • 19.1
  • 0.03376
  • 0.01637
  • 0
  • -0.5747
Output
  • 0.00002584
  • 0.00005573
  • 1.041E-8
  • 0
  • -0.000004905
Output
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0.0025
  • 0
  • 0.1286
  • 0
  • 0
Output
  • 5.6E-11
  • 0
  • 3.5E-11
  • 0
  • 0
Output
  • 7.777E-7
  • 0
  • 9.512E-7
  • 0
  • 0
Output
  • 0.000001326
  • 0
  • 0.00000212
  • 0
  • 0

IndicatorUnit Production
A1-A3
 Transport
A4
 Installation
A5
 Waste processing
C3
 Recycling Potential
D
Abiotic depletion potential - fossil resources (ADPF)
  • 52.55
  • 0.8225
  • 0.03472
  • 0
  • -0.2029
Abiotic depletion potential - non-fossil resources (ADPE)
  • 0.00003505
  • 1.109E-7
  • 8.203E-9
  • 0
  • -0.000008255
Acidification potential, Accumulated Exceedance (AP)
  • 0.01583
  • 0.0004851
  • 0.000009941
  • 0
  • -0.001414
Global Warming Potential - biogenic (GWP-biogenic)
  • -0.3676
  • 0.0001064
  • 0.05457
  • 0.3398
  • 0.02953
Global Warming Potential - fossil fuels (GWP-fossil)
  • 2.097
  • 0.06519
  • 0.006298
  • 0
  • -0.2576
Global Warming Potential - total (GWP-total)
  • 2.21
  • 0.06535
  • 0.06087
  • 0.3398
  • -0.2283
Global Warming Potential - land use and land use change (GWP-luluc)
  • 0.4805
  • 0.00006025
  • 8.703E-7
  • 0
  • -0.0002986
  • 2.584
  • 0.06527
  • 0.0063
  • 0
  • -0.2582
Eutrophication potential - freshwater (EP-freshwater)
  • 0.0005772
  • 0.000005357
  • 2.201E-7
  • 0
  • -0.0000876
Eutrophication potential - marine (EP-marine)
  • 0.007335
  • 0.0002149
  • 0.000004561
  • 0
  • -0.0002595
Eutrophication potential - terrestrial (EP-terrestrial)
  • 0.03831
  • 0.002349
  • 0.00004037
  • 0
  • -0.002797
Photochemical Ozone Creation Potential (POCP)
  • 0.01155
  • 0.000687
  • 0.00001487
  • 0
  • -0.0009143
Depletion potential of the stratospheric ozone layer (ODP)
  • 2.666E-8
  • 1.301E-9
  • 5E-11
  • 0
  • -3.194E-9
Water (user) deprivation potential (WDP)
  • 1.457
  • 0.004994
  • 0.0007971
  • 0
  • -0.09552

IndicatorUnit Production
A1-A3
 Transport
A4
 Installation
A5
 Waste processing
C3
 Recycling Potential
D
1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
2The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP) 1
  • 0.1048
  • 0.00204
  • 0.00004646
  • 0
  • -0.01968
Potential incidence of disease due to PM emissions (PM) 2
  • 1.705E-7
  • 1.953E-9
  • 2.05E-10
  • 0
  • -2.06E-8
Potential Soil quality index (SQP) 2
  • 42.19
  • 0.5395
  • 0.02017
  • 0
  • -4.089
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc) 2
  • 3.103E-8
  • 1.31E-10
  • 5.2E-11
  • 0
  • -4.777E-9
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c) 2
  • 2.281E-9
  • 0
  • 0
  • 0
  • -3.45E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw) 2
  • 49.33
  • 0.0849
  • 0.0137
  • 0
  • -1.053