Process Data set: AXQJ-TT Pure TSLI 24kV AL 1x50/16mm² AFR (en)

Process Data set: AXQJ-TT Pure TSLI 24kV AL 1x50/16mm² AFR (en) en

Process information

Key Data Set Information
Location	SE
Geographical representativeness description	Norway
Reference year	2024
Name	AXQJ-TT Pure TSLI 24kV AL 1x50/16mm² AFR
Technical purpose of product or process	AXQJ-TT Pure TSLI 24KV AL Halogen free and flame retardant on fire. Smoke generation at fire is small, low smoke density (makes evacuation easier) and is not harmful to electrical equipment. Distribution cable for indoor use in 3-phase installation. Can be placed in pipes and in the ground.The cable is axially and radially waterproof. Conductor material Aluminium Conductor surface Bare Longitudinal water blocking conductors Yes Inner semi-conducting layer Yes Core insulation material XLPE Outer semi-conducting layer Yes Drain wire Yes Longitudinal water blocking cable Yes Radial water blocking cable Yes Screen construction Aluminium tape and copper wire Screen Yes Screen material Copper, bare Concentric conductor Copper Material inner sheath Other Material outer sheath Halogenfree polymer Laminated sheath Yes Longitudinal water blocking screen Yes Protective barrier Al/PE Cable shape Round
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Prysmian Group Norge AS
Quantitative reference
Reference flow(s)	AXQJ-TT Pure TSLI 24kV AL 1x50/16mm² AFR - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	2024-09-06 - 2029-09-06
Publication date	2024-09-06
Technological representativeness
Technology description including background system	AXQJ-TT Pure TSLI 24KV AL 1x50/16mm² AFR SAP code: 20217589 El nr. 1060207 STANDARDS APPLIED: HD 620 Part 10, Section K and M, HD604 (halogen-free sheath) Design standard IEC 60332-3-24 (Cat. C) Flame retardant EN 60754-1 and EN 60754-2 Halogen free properties: EN 60754-1 (pH = 4,3, Conductivity = 10µS), EN 60754-2 ( < 0,5% Halogen) Low smoke IEC 61034

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-7462-6847_AXQJ-TT-Pure-TSLI-24kV-AL-1x50-16mm--AFR.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-03-04T10:19:40
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	819fef6d-bcc9-4c43-a2f9-bb27868ac6f9
Date of last revision	2024-09-04T05:20:40.0651582Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-7462-6847
Owner of data set	Prysmian Group Norge AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	8.768	0.02184	1.869	0.01084	0.2138	0.9364	0.008366	0.003009	0.007029	-7.092
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	8.768	0.02184	1.869	0.01084	0.2138	0.9364	0.008366	0.003009	0.007029	-7.092
Use of non renewable primary energy (PENRE)	Input	MJ	57.24	1.468	3.95	0.8613	1.285	0.07241	0.5929	0.06667	0.09136	-10.48
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	16.69	0	0	0	0.03373	0	0	-15	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	73.93	1.468	3.95	0.8613	1.319	0.07241	0.5929	-14.94	0.09136	-10.48
Use of secondary material (SM)	Input	kg	0.0533	0	0	0	0.001066	0	0	0	0	0.005322
Use of renewable secondary fuels (RSF)	Input	MJ	0.1122	0.0006817	0.007335	0.0003792	0.002422	0.0007354	0.0002994	0.00006988	0.0001463	-0.001548
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.02335	0.003134	0.02362	0.001271	0.001061	0.001832	0.001069	0	0.0005936	-0.201
Use of net fresh water (FW)	Input	m3	0.1118	0.0001729	0.004571	0.00009808	0.002344	0.006994	0.00006243	0.0004132	0.000115	-0.02393
Hazardous waste disposed (HWD)	Output	kg	0.03096	0.00008584	0.01887	0.00004715	0.00115	0.00004643	0.00003023	0	0.00751	0.002999
Non hazardous waste dispose (NHWD)	Output	kg	0.918	0.09181	0.02876	0.07492	0.02987	0.00557	0.02833	0	0.3515	-0.2449
Radioactive waste disposed (RWD)	Output	kg	0.0001438	0.000009911	0.00005874	0.00000588	0.000004459	6.474E-7	0.000004042	0	6.128E-7	-0.000043
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.001242	0	0.00358	0	0	0.1777	0.00002316	-0.0002083
Materials for energy recovery (MER)	Output	kg	0	0	0.07072	0	0.006578	0	0	0.2582	5.664E-7	-0.00002742
Exported electrical energy (EEE)	Output	MJ	0	0	0.04118	0	0.009849	0	0	0.4512	0.00003674	-0.00006719
Exported thermal energy (EET)	Output	MJ	0	0	0.623	0	0.149	0	0	6.826	0.0005559	-0.001016

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	72.79	1.468	3.941	0.8613	1.596	0.0723	0.5928	0.06667	0.09136	-10.48
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0002433	0.000001723	0.000001395	9.456E-7	0.000004971	3.95E-7	0.000001065	4.607E-8	3.079E-8	-0.00001632
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.04639	0.0006674	0.0002517	0.0002328	0.0009569	0.00004138	0.0001607	0.0001148	0.00003091	-0.008573
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.03948	0.00004291	0.00865	0.00002273	0.0009645	0.0001464	0.00001603	0.000009616	0.000002773	-0.00369
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	5.02	0.09855	0.07498	0.05537	0.1204	0.005297	0.03931	0.6992	0.03104	-0.8243
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	5.081	0.09863	0.08579	0.05541	0.1218	0.005465	0.03934	0.6992	0.03104	-0.8439
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.02129	0.00003611	0.002156	0.00001617	0.0004702	0.00002185	0.00001374	0.000001663	0.000001116	-0.01595
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	5.046	0.09863	0.08395	0.05541	0.1211	0.005454	0.03934	0.6991	0.03166	-0.7978
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0003183	8.403E-7	0.000002452	4.222E-7	0.000006449	3.809E-7	3.087E-7	8.733E-8	5.349E-8	-0.00005375
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.00543	0.0002104	0.00006239	0.00006999	0.0001183	0.000004549	0.00004766	0.00005501	0.00004169	-0.0008871
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.06483	0.002324	0.0006178	0.0007741	0.001395	0.00005921	0.0005271	0.0005778	0.0001231	-0.01031
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.01995	0.0006717	0.000149	0.0002489	0.0004272	0.00001592	0.0001614	0.0001389	0.00004124	-0.003278
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	2.425E-7	2.178E-8	1.723E-8	1.279E-8	6.107E-9	3.63E-10	8.963E-9	9.44E-10	1.193E-9	-0.002883
Water (user) deprivation potential (WDP)	m3 world eqv.	655.4	1.164	393.5	0.6607	21.06	12.6	0.5655	0.3487	1.293	-445.5

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.1529	0.006369	0.1331	0.003764	0.005988	0	0	0	0	0	0.001312	0	0	0.002591	0.0001456	0.0004966	-0.04623
Potential incidence of disease due to PM emissions (PM)²	disease incidence	3.449E-7	8.057E-9	1.971E-9	4.874E-9	7.275E-9	0	0	0	0	0	2.97E-10	0	0	2.83E-9	4.79E-10	5.87E-10	-7.942E-8
Potential Soil quality index (SQP)²	unitless	13.27	1.332	1.778	0.988	0.3613	0	0	0	0	0	0.03641	0	0	0.4087	0.01053	0.2826	-4.224
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	4.367E-7	1.151E-9	1.844E-9	6.09E-10	8.839E-9	0	0	0	0	0	3.7E-10	0	0	4.72E-10	1.109E-9	9.9E-11	-5.955E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.069E-8	0	7.6E-11	0	2.16E-10	0	0	0	0	0	1.6E-11	0	0	0	2.7E-11	4E-12	-2.395E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	347.3	1.114	2.333	0.6299	8.159	0	0	0	0	0	0.3294	0	0	0.4366	0.6937	55.42	-42.75