Process Data set: Circuit breaker VD4/C 12-17.16-20.25-40 (pitch 210 mm, pole PT2-VG6) (en) en
Process information
| Key Data Set Information | |
| Location | CH |
| Geographical representativeness description | Europe |
| Reference year | 2024 |
| Name |
|
| Use advice for data set | The life cycle assessment is a “cradle-to-grave” analysis, and the system boundaries are defined according to EN 50693, as required by the PCR. For transparency reasons, the manufacturing stage is further divided into an upstream and core stage. |
| Technical purpose of product or process | This Environmental Product Declaration is a “specific product EPD” with extrapolation rules. A representative product configuration is declared as reference product, and the results can be extrapolated for other configurations according to the provided extrapolation rules. The EPD covers the following devices of the VD4/C 12-17.16-20.25-40 (pitch 210 mm, pole PT2-VG6), including related accessories and packaging: • VD4/C 12-17.16-20.25-40 (pitch 210 mm, pole PT2-VG6) Manual truck • VD4/C 12-17.16-20.25-40 (pitch 210 mm, pole PT2-VG6) Motorized truck The PT2 is an embedded pole which are used to provide dielectric strength and protection of the vacuum interrupter (VG6) The constituent materials of the reference Product are presented below. Type Material Weight [kg] Weight % Metals Steel, low-alloyed 67.66 62.91 Steel, stainless 0.32 0.30 Copper 18.58 17.27 Aluminum 5.85 5.44 Cables 2.56 2.38 Other metals 1.77 1.64 Plastics Polycarbonate 0.05 0.04 Polyamide 5.50 5.11 Other plastics 1.96 1.82 Others Ceramics 3.01 2.79 Others 0.29 0.26 Total 107.55 100 |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | The life cycle assessment is a “cradle-to-grave” analysis, and the system boundaries are defined according to EN 50693, as required by the PCR. For transparency reasons, the manufacturing stage is further divided into an upstream and core stage. The utility consumption and waste generation by ABB, in the core manufacturing stage, is allocated to the production of one reference product according to applicable rules. For the end-of-life allocation, the “Polluter Pays” principle is adopted according to what is defined in the CEN/TR 16970 standard. However, the potential benefits and avoided loads from recovery and recycling processes are not considered because it is not required by the PCR. According to PCR EPDItaly007 “Electronic and electrical products and systems, the cut-off criteria can be set to a maximum of 5% of the overall environmental impacts. According to PCR EPDItaly012, in this LCA, grease and stickers have been excluded as their weight is negligible. In addition, production, use and disposal of the packaging of components and semi-finished intermediates have been excluded for the same reason as stated before. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | 2024-09-20 - 2029-09-20 |
| Technological representativeness | |
| Technology description including background system | General technical information of the reference product is presented below. Description Config.1 (Ref. product) Config.2 Device Circuit Breaker VD4/C VD4/C Size Weight [Kg] 145.59 146.91 Ratings Rated voltage [kV] 12-17 12-17 Rated current [A] 1600-2000 1600-2000 Rated short circuit breaking current [kA] 25-40 25-40 Config. Manual/Motorized truck Manual Motorized The products are manufactured by ABB Dalmine located in Italy. The manufacturing site is certified according to the following standards: • ISO 9001:2015 – Quality Management Systems • ISO 14001:2015 – Environmental Management Systems • ISO 45001:2018 – Occupational Health and Safety Management Systems • ISO 50001:2018 – Energy management systems |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-10-07T18:33:12 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 7dfc744f-a194-4242-8310-d794c144a5d1 |
| Date of last revision | 2025-10-07T16:21:46.4490152Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-7619-6998 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle