Process information
| Key Data Set Information | |
| Location | DE |
| Geographical representativeness description | Germany |
| Reference year | 2024 |
| Name |
|
| Technical purpose of product or process | In order to prevent the spread of smoke in buildings through ventilation and air-conditioning systems, it is important to detect smoke at an early stage. The duct smoke detector RM-O-M is used to control and trigger fire dampers or smoke protection dampers. The duct smoke detector operates on the principle of light scattering and detects the smoke regardless of its temperature, so that fire dampers close before their release temperature is reached. The fire dampers or smoke control dampers are closed in the event of interrupting the supply voltage to the spring return actuator (alarm relay R1). For more information download the product data sheet. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Energy, water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | "2024-01-02" - "2029-01-02" |
| Technological representativeness | |
| Technology description including background system | Internal fuse: 500 mA, slow-blow. maximum cross-section of connection cable: 2.5 mm². Relay contact FD Alarm (fire alarm), motherboard: 230 V AC/24 V DC; 8A. Relay contact Sys Fail (system error), motherboard: 24 V DC; 1A. Relay contact Alarm BMS*, EM-RELAY: 24 V DC; 1A. Relay contact Airflow (airflow monitoring), EM-RELAY: 24 V DC; 1A. Relay contact Pollution (monitoring of pollution level), EM-RELAY: 24 V DC; 1A. IP protection level: IP 42. Protection class (230V AC/24 V DC): II (protective insulation) / III (protective extra-low voltage). Minimum length air guide profile: 90 mm (600 mm in scope of delivery). permissible airflow velocity: 1.0 3 20 m/s. Alarm threshold for volume flow rate: 0.8 m/s. Alarm threshold for increased contamination: > 70 %. Operating temperature: -10 to 65 °C. Relative humidity: 5 % to 90 %, no condensation. Storage temperature: -20 to 70 °C. Weight: maximum 1.1 kg (without air guide profile). Dimensions: 340 × 144 × 80 mm (L × W × H). EC conformity: Construction Products Regulation (EU) no. 305/2011. Approvals: EN 54-27:2015 Fire detection systems - Smoke detectors for monitoring ventilation ducts. General building inspectorate licence Z-78.6-252 VdS approval number G223017. *BMS: Building Management System = Management and control equipment (MCE). |
Modelling and validation
| Subtype | representative dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-09-14T14:06:47 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 7b432fa4-6697-4c13-b303-e1c83fbd63c7 |
| Date of last revision | 2023-12-19T08:47:12.9822414Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-5689-4949 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle