Process information
| Key Data Set Information | |
| Location | DE |
| Geographical representativeness description | The main markets are Germany, Italy and Scandinavia. |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | The scope of this EPD is cradle to gate with options, modules C1-C4 and module D. No actions are necessary during User stage. |
| Technical purpose of product or process | StoColor Opticryl Satin is a silk gloss interior acrylate paint, with wet-scrub resistance 1 and hiding power 2 in accordance with EN 13300 and tested for harmful substances. The area of application is interior for texture-retaining and hard-wearing wall and ceiling surfaces, especially for StoTap/StoTex wall coverings. The application process can be done manually or using machinery. StoColor Opticryl Satin is produced in a plant in Weizen, Germany. StoColor Opticryl Satin has the following properties: - resistance to surface disinfectants in accordance with the test report - solvent- and plasticiser-free - TÜV SÜD - testing for health-relevant ingredients and emissions, regular product and process monitoring, inspection of input materials (www.tuvsud.com/schadstoffpruefung-bauprodukte) - not harmful for food, TÜV SÜD certified - free from substances that contribute to 'black dust' on walls For the use and application of the product the respective national provisions at the place of use apply, in Germany for example the building codes of the federal states and the corresponding national specifications. The following data is required by the corresponding PCR B. Further information can be found on the Safety Data Sheet on www.sto.de. 1) This product contains substances listed in the candidate list (date: 18.03.2025) exceeding 0.1 percentage by mass: no. 2) This product contains other CMR substances in categories 1A or 1B which are not on the candidate list, exceeding 0.1 percentage by mass: yes titanium dioxide, pigment, >=20 - < 30 CAS-nr.: 13463-67-7 3) Biocide products were added to this construction product or it has been treated with biocide products (this then concerns a treated product as defined by the (EU) Ordinance on Biocide Products No. 528/2012): yes 1,2-Benzisothiazol-3(2H)-on, in-can preservative, >= 0,0025 - < 0,025 CAS-nr.: 2634-33-5 reaction mass of 5-Chlor-2-methyl-4-isothiazolin-3-on and 2-Methyl-2H;isothiazol-3-on (3:1), in-can preservative, >= 0,0002 - < 0,0015 CAS-nr.: 55965-84-9 The material composition of the declared mixed product is as stated below: |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-03-24 - 2030-03-24 |
| Technological representativeness | |
| Technology description including background system | The technical data stated here is relevant for the use of the declared product. Further information regarding the technical properties can be found on the Technical Data Sheet on www.sto.de. |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-06-13T09:42:47 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 7913515c-530b-4c71-bc3c-7c8d40097559 |
| Date of last revision | 2025-03-20T09:44:37.0203127Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-9445-9056 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle