Process Data set: PP Cable pipe (en)

Process Data set: PP Cable pipe (en) en

Process information

Key Data Set Information
Location	NO
Geographical representativeness description	Mainly Norway.
Reference year	2024
Name	PP Cable pipe
Technical purpose of product or process	PP Cable pipes for cable protection. These pipes can be installed above ground and in trenches. The PP pipes are coloured according to national requirements. This EPD is for red pipes, and representative for 110 and 160 mm. Project specific EPD for other colours and dimensions can be provided. For more information: www.hallingplast.no The product standard is pr NS 2967.
Classification	Class name : Hierarchy level EPDNorge: Construction / Piping
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804:2012+A2:2019. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Hallingplast AS
Quantitative reference
Reference flow(s)	PP Cable pipe - 1.0 * 1.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-09-16" - "2029-09-16"
Publication date	2024-09-16
Technological representativeness
Technology description including background system	The material density for these products is 900 kg/m3. The dimensions given for these products, i.e. diameter and wall thickness, are based on the dimensions given in SBC NO 085:2020. For additional technical information: www.hallingplast.no

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 028 Part B for Cable pipes

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 028 Part B for Cable pipes

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-7553-6935_PP-Cable-pipe.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-09-01T01:05:41
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	78db8b48-095a-4e7c-a131-8355fba30fdb
Date of last revision	2024-09-13T11:22:11.5972744Z
Data set version	00.07.000
Registration authority	EPD Norway
Registration number	NEPD-7553-6935-EN
Owner of data set	Hallingplast AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Production A1-A3	Transport A4	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	3.102	0.01087	0.00308	0.002096	0.003891	-5.443
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	3.102	0.01087	0.00308	0.002096	0.003891	-5.443
Use of non renewable primary energy (PENRE)	Input	MJ	45.47	0.7595	0.2152	0.06903	0.09663	-17.58
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	33.52	0	0	-32.7	0	-13.11
Total use of non renewable primary energy resource (PENRT)	Input	MJ	78.99	0.7595	0.2152	-32.63	0.09663	-30.69
Use of secondary material (SM)	Input	kg	0.0002967	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.06482	0.0003889	0.0001102	0.00005769	0.00008215	-0.0233
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.01657	0.001391	0.000394	0	0.001574	-0.3014
Use of net fresh water (FW)	Input	m3	0.03652	0.00008122	0.00002301	0.0001906	0.0001175	-0.01436
Hazardous waste disposed (HWD)	Output	kg	0.002182	0.00003917	0.0000111	0	0.01007	-0.0005054
Non hazardous waste dispose (NHWD)	Output	kg	0.2105	0.03693	0.01046	0	0.4055	-0.04303
Radioactive waste disposed (RWD)	Output	kg	0.00004971	0.000005173	0.000001466	0	3.527E-8	-0.00001643
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.001752	0	0	1	0	-0.0002227
Materials for energy recovery (MER)	Output	kg	0.003859	0	0	0.4	0	-0.0009643
Exported electrical energy (EEE)	Output	MJ	0.002501	0	0	0.6511	0	-0.001684
Exported thermal energy (EET)	Output	MJ	0.03783	0	0	9.85	0	-0.02547

Core environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	76.2	0.7594	0.2152	0.06903	0.09663	-29.56
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00002395	0.000001387	3.931E-7	3.737E-8	3.334E-8	-0.000007409
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.00868	0.0001444	0.0000409	0.0001285	0.00003191	-0.003221
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.01025	0.00002079	0.00000589	0.000008415	0.000004344	-0.003703
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	2.202	0.05023	0.01423	1.019	0.05028	-0.8509
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	2.213	0.05027	0.01424	1.019	0.05028	-0.8568
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0006519	0.00001788	0.000005065	0.000001286	9.319E-7	-0.002161
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	2.085	0.05026	0.01424	1.019	0.05031	-0.8044
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.00003264	4.013E-7	1.137E-7	8.556E-8	4.733E-8	-0.00001625
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.001525	0.00002856	0.000008093	0.00006145	0.00002012	-0.0006125
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.01691	0.0003195	0.00009052	0.0006648	0.0001285	-0.006745
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.007371	0.0001224	0.00003468	0.0001599	0.00004744	-0.002892
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	6.845E-8	1.138E-8	3.224E-9	8.02E-10	1.313E-9	-0.004161
Water (user) deprivation potential (WDP)	m3 world eqv.	92.56	0.7346	0.2081	0.1606	0.6858	-33.63

Additional environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.05137	0.003319	0	0	0.0009405	0.0001202	0.0004497	-0.01936
Potential incidence of disease due to PM emissions (PM)²	disease incidence	7.492E-8	3.075E-9	0	0	8.71E-10	6.02E-10	6.52E-10	-5.241E-8
Potential Soil quality index (SQP)²	unitless	4.103	0.5312	0	0	0.1505	0.008711	0.364	-6.204
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	1.446E-8	6.15E-10	0	0	1.74E-10	8.68E-10	6.9E-11	-8.868E-9
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	5.13E-10	0	0	0	0	2.4E-11	3E-12	-2.43E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	12.14	0.563	0	0	0.1595	0.2042	0.06896	-8.134