Process Data set: Sense Basic 300x600 (en)

Process Data set: Sense Basic 300x600 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Sense Basic 300x600
Technical purpose of product or process	The Sense Basic 300x600 LED panel is ideal both for new installations and remodelling projects. It can directly replace 2x14W T5 and 2x18W T8 luminaires. It has a lightweight steel housing and is based on backlight, yet it is only 35 mm height. High quality non-yellowing PMMA micro prismatic front optics. Easy tool-free installation, twist connector between driver and panel and junction box with automatic strain relief for cables or plastic tubing. System Wattage: 20.0 W. Luminous flux: 2180 lm. Efficacy: 109 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, . Light distribution: Direct. Control/Dimming: On/Off. Luminiare class: Class II. Housing: Steel. Optics: Acrylic (PMMA). Height: 36.0mm. Length: 595.0 mm. Width: 295.0 mm. EAN: 7021982121463 The EPD also cowers the following products: EPD: 7021982121470 - SENSE BASIC 300X600 4000K EPD: 7021982121494 - SENSE BASIC 300X600 3000K DALI Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Sense Basic 300x600 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.357795248105 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-03-31 - 2030-03-31
Publication date	2025-03-31
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/sense-basic-300x600/212146/pdf/specification_212146.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/701589_Sense%20Basic%20300x600/50/701589_Sense%20Basic.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

Sense-Basic-300x600.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-06-09T15:52:33
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	78240218-b4f4-468b-ae26-7c88cf294ea8
Date of last revision	2025-03-28T13:29:19.4007884Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-9520-9177
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	43.25	0.01764	0.4945	0.1324	0.002878	3119	0.01587	0.09404	0.1064	-4.011
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	4.624	0	0	0	-4.624	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	47.88	0.01764	0.4945	0.1324	-4.621	3119	0.01587	0.09404	0.1064	-4.011
Use of non renewable primary energy (PENRE)	Input	MJ	344.8	1.558	6.078	11.66	0.1749	241.2	1.402	0.5511	0.3606	-12.09
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	13.14	0	0	0	0	0	0	-14.07	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	357.9	1.558	6.078	11.66	0.1749	241.2	1.402	-13.51	0.3606	-12.09
Use of secondary material (SM)	Input	kg	1.1	0	0	0	0	0	0	0	0.002621	0.003785
Use of renewable secondary fuels (RSF)	Input	MJ	0.2768	0.000345	0.0002737	0.004278	0.00009547	2.45	0.0003104	0.001161	0.0003429	0.009112
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.7699	0.002929	0.002984	0.02331	0.0003936	6.103	0.002635	-0.00004559	0.02276	0.1085
Use of net fresh water (FW)	Input	m3	0.2681	0.0001743	0.00379	0.001017	0.0000825	23.3	0.0001568	0.0009945	0.0002491	-0.0121
Hazardous waste disposed (HWD)	Output	kg	0.1239	0.0001408	0.0005065	0.0005918	0	0.1547	0.0001267	0.0000249	0.125	-0.004604
Non hazardous waste dispose (NHWD)	Output	kg	3.547	0.07481	0.06323	0.3695	0.7726	18.55	0.0673	0.03636	0.2919	-0.2636
Radioactive waste disposed (RWD)	Output	kg	0.000862	0.00001023	0.00001181	0.00007982	0	0.002157	0.000009201	0.000001407	5.133E-7	-0.00003116
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.03123	0	0.7187	0	0	0.3547	0.00001787	-0.0001481
Materials for energy recovery (MER)	Output	kg	0	0	0.002943	0	0.0008819	0	0	0.1993	4.372E-7	-0.0000195
Exported electrical energy (EEE)	Output	MJ	0	0	0.004522	0	0.04419	0	0	0.3062	0.00002836	-0.00004779
Exported thermal energy (EET)	Output	MJ	0	0	0.06842	0	0.6685	0	0	4.632	0.0004291	-0.000723

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	349.2	1.558	6.078	11.66	0.1748	240.8	1.402	0.551	0.3602	-12.08
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.007108	0.000002829	0.00000156	0.00001599	3.042E-7	0.001316	0.000002545	4.353E-7	1.743E-7	-0.001049
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.2403	0.0003155	0.003426	0.01223	0.00005918	0.1379	0.0002839	0.0002976	0.0001466	-0.05526
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-1.155	0.00004107	0.0001038	0.0002934	1.31	0.4878	0.00003695	0.0001077	0.00002472	-0.002483
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	27.99	0.1055	0.669	0.8236	0.0125	17.64	0.09489	0.5235	0.04992	-1.032
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	26.89	0.1056	0.6691	0.824	1.322	18.2	0.09496	0.5238	0.05017	-1.036
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.05478	0.00003856	0.00007289	0.0004052	0.000004133	0.07278	0.00003469	0.0001767	0.0002296	-0.002216
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	28.19	0.1056	0.6376	0.824	0.0125	18.17	0.09496	0.5237	0.051	-1.156
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.004538	9.894E-7	0.00001213	0.00000537	1.026E-7	0.001269	8.901E-7	0.000001549	0.000001198	-0.0003426
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.03108	0.00006212	0.0007984	0.002936	0.00001957	0.01515	0.00005589	0.00008488	0.00005724	-0.002995
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.3835	0.0006947	0.008799	0.0327	0.0002119	0.1972	0.0006249	0.000908	0.0003635	-0.04094
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1116	0.0002601	0.003317	0.008862	0.00006091	0.05304	0.000234	0.0002369	0.0001622	-0.01202
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000004406	2.294E-8	2.46E-8	1.814E-7	2.639E-9	0.00000121	2.063E-8	4.3E-9	2.297E-9	-0.002239
Water (user) deprivation potential (WDP)	m3 world eqv.	830.1	0.5082	0.5675	7.531	0.2216	939.1	0.4572	6.041	1.373	-10.65

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.136	0.006477	0.008779	0.05043	0.0007481	4.37	0	0.005827	0.002862	0.0008423	-0.03601
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001449	6.814E-9	4.019E-8	3.023E-8	8.74E-10	9.884E-7	0	6.135E-9	1.787E-9	2.691E-9	-1.443E-7
Potential Soil quality index (SQP)²	unitless	81.75	1.068	1.183	5.738	0.1173	121.3	0	0.9606	0.1281	0.9484	-11.03
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001526	1.24E-9	2.919E-8	5.986E-9	2.93E-10	0.000001234	0	1.115E-9	5.484E-8	8.91E-10	-2.166E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	3.554E-8	0	1.84E-10	0	7E-12	5.237E-8	0	0	9.28E-10	1.19E-10	-4.35E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1948	1.263	15.14	8.014	0.2332	1097	0	1.137	1.893	57.08	-430.8