Process Data set: XnRUHKXS1 1x500 RMC/50 12/20kV (en)

Process Data set: XnRUHKXS1 1x500 RMC/50 12/20kV (en) en

Process information

Key Data Set Information
Location	CZ
Geographical representativeness description	Poland
Reference year	2025
Name	XnRUHKXS1 1x500 RMC/50 12/20kV
Technical purpose of product or process	Cables are designed for fixed installation in the ground, in the air, into building blocks and into pipes made of non-magnetic material. Copper conductor - round, stranded class 2 Inner semiconducting layer XLPE insulation Outer semiconducting layer Semiconducting water-blocking tape Cu wire screen and Cu tape counterhelix Semiconducting water-blocking tape Al foil PE sheath fire retardant
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	NKT headquarter Denmark A/S
Quantitative reference
Reference flow(s)	XnRUHKXS1 1x500 RMC/50 12/20kV - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-05-13 - 2030-05-13
Publication date	2025-05-13
Technological representativeness
Technology description including background system	Norm (standard): PN-HD 620 10-R Rated voltage Uo/U: 12/20 kV Maximal voltage: 24 kV Maximal operating conductor temperature: 90 °C Maximal short-circuit conductor temperature: 250 °C Test voltage: 42 kV Temperature range: from -35 up to 90 °C Minimal storage temperature: -35 °C Minimal temperature for laying and manipulation: -20 °C Colour of insulation: natural Colour of sheath: black Packaging: drum Certificate: SEP-BBJ Declaration of Conformity EU (CE): yes UV stability: yes Minimal radius of bend: 15 D mm CPR-Classification: Eca RoHS: yes REACH: yes Maximum pulling force: 50 N/mm²

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11034-9984_XnRUHKXS1-1x500-RMC-50-12-20kV.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-08-22T13:39:59
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	7560b9cd-3763-44b4-aaed-2a93f1e1f413
Date of last revision	2025-05-12T11:42:35.0547806Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11034-9984
Owner of data set	NKT headquarter Denmark A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	67.34	0.1049	45.4	0.1192	2.261	0.01538	0.06503	0.003272	0.1002	-25.38
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	67.34	0.1049	45.4	0.1192	2.261	0.01538	0.06503	0.003272	0.1002	-25.38
Use of non renewable primary energy (PENRE)	Input	MJ	494.8	7.35	4.269	8.329	10.31	0.1478	4.543	0.1045	0.8008	-45.68
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	44.77	0	0	0	0.04263	0	0	-42.63	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	539.6	7.35	4.269	8.329	10.36	0.1478	4.543	-42.53	0.8008	-45.68
Use of secondary material (SM)	Input	kg	1.148	0	0	0	0.02296	0	0	0	0	1.374
Use of renewable secondary fuels (RSF)	Input	MJ	0.3804	0.00375	0.002016	0.004265	0.007853	0.0007892	0.002327	0.00008936	0.00208	0.129
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.7631	0.01339	0.01065	0.01525	0.01609	0.001238	0.008319	0	0.001947	-0.1701
Use of net fresh water (FW)	Input	m3	0.7164	0.0007837	0.003028	0.0008907	0.01445	0.0004015	0.0004858	0.0003381	0.001039	-0.129
Hazardous waste disposed (HWD)	Output	kg	0.3915	0.0003786	0.01692	0.0004295	0.01	0.00001357	0.0002343	0	0.09095	-0.05245
Non hazardous waste dispose (NHWD)	Output	kg	12.73	0.3556	0.09166	0.4051	0.3234	0.0008868	0.2209	0	2.587	-2.35
Radioactive waste disposed (RWD)	Output	kg	0.00103	0.00005008	0.00001697	0.00005674	0.00002319	1.233E-7	0.00003095	0	0.00000554	-0.00006383
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.001619	0	0.06139	0	0	3.068	0.00004612	-0.05379
Materials for energy recovery (MER)	Output	kg	0	0	0.03435	0	0.01097	0	0	0.5142	0.000001128	-0.007082
Exported electrical energy (EEE)	Output	MJ	0	0	0.0193	0	0.02014	0	0	0.9877	0.00007318	-0.01735
Exported thermal energy (EET)	Output	MJ	0	0	0.2921	0	0.3047	0	0	14.94	0.001107	-0.2625

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	536	7.35	4.266	8.329	11.14	0.1478	4.543	0.1045	0.8008	-45.69
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.01183	0.00001338	0.000002594	0.00001522	0.0002373	4.1E-8	0.0000083	5.789E-8	2.665E-7	-0.004419
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	4.294	0.00149	0.005724	0.001583	0.08606	0.00009924	0.0008635	0.0001975	0.00027	-0.7909
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.9056	0.0002009	0.01251	0.000228	0.01837	0.00002049	0.0001244	0.00001318	0.000005741	-0.02292
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	42.38	0.4866	0.3327	0.5508	0.9075	0.01355	0.3005	1.536	0.08891	-4.98
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	43.32	0.487	0.3471	0.5513	0.9266	0.01357	0.3007	1.536	0.08892	-5.014
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.03653	0.000174	0.001916	0.0001961	0.0007766	0.000003167	0.0001069	0.000001983	0.00001266	-0.01166
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	43.15	0.4869	0.3432	0.5512	0.9231	0.01408	0.3007	1.536	0.0949	-2.508
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.04229	0.000003875	0.00001751	0.000004401	0.0008464	0.000001873	0.0000024	1.242E-7	5.956E-7	-0.005331
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.1399	0.0003	0.001706	0.0003132	0.002849	0.00001058	0.0001709	0.00009481	0.0001577	-0.0328
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	2.008	0.003354	0.02725	0.003504	0.04088	0.0001224	0.001911	0.001022	0.001086	-0.5068
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.6374	0.00125	0.004943	0.001342	0.01291	0.00003389	0.0007321	0.0002448	0.0003199	-0.1378
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00000237	1.101E-7	7.13E-8	1.248E-7	5.374E-8	2.08E-10	6.806E-8	1.254E-9	9.875E-9	-0.006312
Water (user) deprivation potential (WDP)	m3 world eqv.	150.8	7.079	1237	8.056	28.44	0.801	4.394	0.2744	18.55	129.5

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.024	0.03212	0.01111	0.0364	0.02218	0	0	0	0	0	0.0001441	0	0	0.01986	0.0001829	0.005131	-0.07088
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000007564	2.969E-8	7.9E-8	3.372E-8	1.542E-7	0	0	0	0	0	1.56E-10	0	0	1.84E-8	7.8E-10	4.767E-9	-0.000001634
Potential Soil quality index (SQP)²	unitless	410.3	5.119	204.9	5.826	12.56	0	0	0	0	0	0.05105	0	0	3.178	0.01314	1.639	-100.4
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.00007008	5.949E-9	1.7E-8	6.745E-9	0.000001402	0	0	0	0	0	2.47E-10	0	0	3.679E-9	1.387E-9	1.134E-9	-0.000008789
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	7.866E-7	0	6.38E-10	0	1.575E-8	0	0	0	0	0	6E-12	0	0	0	3.6E-11	6E-11	-1.03E-7
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	3.223E+4	5.442	50.7	6.174	671	0	0	0	0	0	0.1967	0	0	3.368	0.4066	1.26E+3	-7266