Process information
| Key Data Set Information | |
| Location | DK |
| Geographical representativeness description | Denmark. |
| Reference year | 2024 |
| Name |
|
| Technical purpose of product or process | he EPD describes results for production of lightweight expanded clay aggregate, labelled Leca® 10-20 Plads Vest, from the factory in Hinge, Denmark. Lightweight expanded clay aggregate is a granular ceramic material made from natural clay (see process information below). The main characteristic of expanded clay is low density combined with high strength. Leca® 10-20 Plads Vest is used in lightweight blocks and slabs, insulation fill, water treatment, lightweight fillings and geotechnical fills for thermal and sound insulation purposes. Thus Leca® 10-20 Plads Vest is typically hidden in buildings or cast into concrete. The density of Leca® 10-20 Plads Vest is 0,365 tonnes per m3. The thermal insulation is 0,095 W/mK. Further information or explanatory material may be obtained by contacting Leca Danmark A/S. The water content of the Leca® 10-20 Plads Vest is 0 % when the Leca® 10-20 Plads Vest is produced at Leca Danmark A/S Hinge. The storage conditions can change the water content of the Leca® 10-20 Plads Vest up to 25%. Different waste are recovered in the production process both as fuels as clay additives. See additional Tech info. Leca® 10-20 Plads Vest is produced by using nearby clay and transported by using a conveyer belt to the factory. Furthermore the final product Leca® 10-20 Plads Vest is sold in bulk, so no packing is used. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804+A2. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | "2024-09-06" - "2029-09-06" |
| Technological representativeness | |
| Technology description including background system | Loose bulk density (Test method: EN 1097-3): 0,365 ton/m3 Compressibility and confined compressive strenght (Test method: EN 13055-1): 0,75 MPa Thermal conductivity (Test method: EN 12667): 0,095 W/mK Reaction to fire: A1 |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-11-27T14:21:36 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 72146de6-6594-4e1c-a1f8-bbb949938da0 |
| Date of last revision | 2024-09-05T10:59:34.5497427Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-7485-6860 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle