Process Data set: Sense 320 TW (en)

Process Data set: Sense 320 TW (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Sense 320 TW
Technical purpose of product or process	Sense luminaire used as replacement or alternative for a normal downlight. Very low profile and quick connection between luminaire and driver as well as tool-free connection in junction box with loop for easy and quick installation. High efficiency up to 105 lm/W and low glare rating makes Sense the obvious choise in many applications.Tunable White 2700-6500K LEDDim or DALI Type 8. System Wattage: 19.0 W. Luminous flux: 1830lm. Efficacy: 96 lm/W. Colour temperature: 2700-6500K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>50,000, L90>50,000. Light distribution: Direct. Control/Dimming: Tunable White LEDDim. Luminiare class: Class II SELV. Housing: Aluminium. Optics: Acrylic (PMMA). Diameter: 320.0mm. Cut-out: 285.0mm. EAN: 7021982123030 Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Sense 320 TW - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.402412648453 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-07-09 - 2030-07-09
Publication date	2025-07-09
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/sense-round-tw/212303/pdf/specification_212303.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/701576_Sense%20Round%20TW/50/701576_Sense%20Round%20TW.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11739-11691_Sense-320-TW-.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-09-25T18:23:39
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	7119ca0d-5cc9-479c-b7ba-a250c53768ae
Date of last revision	2025-07-07T11:56:46.5958146Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11739-11691
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	33.31	0.007368	0.5111	0.1439	0.003216	2703	0.01725	0.05029	0.03664	-6.484
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	7.641	0	0	0	-7.641	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	40.95	0.007368	0.5111	0.1439	-7.638	2703	0.01725	0.05029	0.03664	-6.484
Use of non renewable primary energy (PENRE)	Input	MJ	195.4	0.6511	5.986	12.67	0.1954	209	1.524	0.4111	0.1808	-15.81
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	10.61	0	0	0	0	0	0	-11.24	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	206	0.6511	5.986	12.67	0.1954	209	1.524	-10.83	0.1808	-15.81
Use of secondary material (SM)	Input	kg	0.9905	0	0	0	0	0	0	0	0.0006925	0.00625
Use of renewable secondary fuels (RSF)	Input	MJ	0.2877	0.0001441	0.0002359	0.004651	0.0001067	2.123	0.0003374	0.0009018	0.0002675	0.005567
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.5563	0.001224	0.002836	0.02534	0.0004398	5.288	0.002865	-0.00002707	0.006094	0.02648
Use of net fresh water (FW)	Input	m3	0.1602	0.0000728	0.002526	0.001105	0.00009218	20.19	0.0001704	0.0008123	0.0001756	-0.02408
Hazardous waste disposed (HWD)	Output	kg	0.1041	0.00005884	0.0005131	0.0006433	0	0.134	0.0001377	0.00001352	0.03871	-0.0002387
Non hazardous waste dispose (NHWD)	Output	kg	2.301	0.03125	0.07584	0.4017	0.8633	16.08	0.07317	0.01845	0.3862	-0.35
Radioactive waste disposed (RWD)	Output	kg	0.0004778	0.000004273	0.000009977	0.00008678	0	0.001869	0.00001	6.835E-7	7.188E-7	-0.00005257
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.0434	0	0.803	0	0	0.4982	0.000019	-0.0002446
Materials for energy recovery (MER)	Output	kg	0	0	0.00315	0	0.0219	0	0	0.2118	4.646E-7	-0.00003221
Exported electrical energy (EEE)	Output	MJ	0	0	0.004841	0	0.04938	0	0	0.3255	0.00003014	-0.00007891
Exported thermal energy (EET)	Output	MJ	0	0	0.07323	0	0.747	0	0	4.925	0.000456	-0.001194

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	198.4	0.651	5.986	12.67	0.1954	208.7	1.524	0.411	0.1807	-15.81
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.005106	0.000001182	0.000001549	0.00001739	3.399E-7	0.00114	0.000002767	2.836E-7	7.429E-8	-0.0006875
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1183	0.0001318	0.003415	0.01329	0.00006613	0.1195	0.0003086	0.0002461	0.00006755	-0.03739
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-1.322	0.00001716	0.00009859	0.000319	1.473	0.4227	0.00004017	0.00007792	0.00000816	-0.004345
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	15.87	0.04406	0.6648	0.8954	0.01397	15.29	0.1032	0.5354	0.0335	-1.294
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	14.59	0.0441	0.665	0.8958	1.487	15.78	0.1032	0.5356	0.03357	-1.312
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.04469	0.00001611	0.00007194	0.0004405	0.000004619	0.06307	0.00003772	0.00007448	0.00006186	-0.01355
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	16.06	0.0441	0.6322	0.8958	0.01397	15.74	0.1032	0.5355	0.03357	-1.272
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001342	4.133E-7	0.00001247	0.000005838	1.147E-7	0.0011	9.677E-7	0.000001253	3.716E-7	-0.0002198
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01756	0.00002595	0.0007759	0.003192	0.00002187	0.01313	0.00006076	0.00007689	0.00004435	-0.00239
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.2197	0.0002902	0.00855	0.03555	0.0002368	0.1709	0.0006794	0.000814	0.0002116	-0.03083
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.06309	0.0001087	0.003034	0.009635	0.00006807	0.04596	0.0002544	0.0002072	0.00007952	-0.00941
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000004032	9.584E-9	2.016E-8	1.972E-7	2.949E-9	0.000001048	2.243E-8	3.057E-9	1.694E-9	-0.002396
Water (user) deprivation potential (WDP)	m3 world eqv.	880.6	0.2123	0.4869	8.187	0.2476	813.8	0.497	3.475	1.938	-360.6

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.5471	0.002706	0.007671	0.05483	0.0008359	3.787	0	0.006335	0.001895	0.0007273	-0.05798
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001069	2.851E-9	4.134E-8	3.286E-8	9.75E-10	8.565E-7	0	6.669E-9	1.427E-9	1.243E-9	-1.379E-7
Potential Soil quality index (SQP)²	unitless	109.7	0.4461	1.188	6.238	0.1311	105.1	0	1.044	0.09097	0.4741	-8.016
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	6.223E-7	5.14E-10	2.45E-8	6.508E-9	3.27E-10	0.000001069	0	1.213E-9	2.862E-8	3.36E-10	-1.123E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.279E-8	0	1.77E-10	0	8E-12	4.539E-8	0	0	4.95E-10	3.6E-11	-3.948E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	934.4	0.5278	15.54	8.712	0.2605	950.9	0	1.236	1.649	106.4	-258.4