Process Data set: Inspire R 300 TW (en)

Process Data set: Inspire R 300 TW (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Inspire R 300 TW
Technical purpose of product or process	Inspire R TW is a rectangular recessed downlight for indoor use. With cubist black reflectors it has very low glare and harmonious non-flickering light with a well-defined light pattern.Inspire R TW is suitable for use in high-end residential and commercial environments.Tunable White from 2000-4000K or 2700-6500K. Controlled by TW LEDDim or DALI Type 8 (DALI Type 8 only version 300). System Wattage: 17.0 W. Luminous flux: 970lm (@4000K) . Efficacy: 57 lm/W. Colour temperature: 2000-4000K. Colour rendering: Ra>90. MacAdams factor: SDCM: 2. Lifetime: L90/B10>100,000, . Light distribution: Direct. Control/Dimming: Tunable White LEDDim. Luminiare class: Class II SELV. Housing: Aluminium. Optics: . Height: 40.0mm. Length: 303.0 mm. Width: 62.0 mm. EAN: 7021982124419 The EPD also covers the following products: EAN: 7021982124426 - INSPIRE R 300 BALCK 2000-4000K TW LEDDIM EAN: 7021982124501 - INSPIRE R 300 WHITE 2700-6500K TW LEDDIM EAN: 7021982124525 - INSPIRE R 300 BLACK 2700-6500K TW LEDDIM Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Inspire R 300 TW - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.072692085959 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-06-04 - 2030-06-04
Publication date	2025-06-04
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/inspire-r-tw/212441/pdf/specification_212441.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/702710_Inspire%20R%20TW%20LEDDim/50/702710_Inspire%20R%20TW.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11314-11268_Inspire-R-300-TW-.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-08-06T16:17:54
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	6b00e12e-4dae-466e-9adc-82426af0f71b
Date of last revision	2025-06-03T14:02:26.9890335Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11314-11268
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	16.21	0.001423	0.2575	0.04374	0.0005847	2419	0.005505	0.04671	0.0383	-1.244
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.9553	0	0	0	-0.9553	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	17.17	0.001423	0.2575	0.04374	-0.9547	2419	0.005505	0.04671	0.0383	-1.244
Use of non renewable primary energy (PENRE)	Input	MJ	130.8	0.1257	2.567	3.85	0.03552	187	0.4864	0.3294	0.1383	-5.468
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	4.34	0	0	0	0	0	0	-4.966	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	135.1	0.1257	2.567	3.85	0.03552	187	0.4864	-4.637	0.1383	-5.468
Use of secondary material (SM)	Input	kg	0.4067	0	0	0	0	0	0	0	0.0008877	0.004949
Use of renewable secondary fuels (RSF)	Input	MJ	0.1565	0.00002784	0.0002229	0.001441	0.00001939	1.899	0.0001077	0.000749	0.0001632	0.0007529
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.04236	0.0002364	0.002108	0.007722	0.00007994	4.732	0.0009143	-0.00002818	0.007714	-0.0408
Use of net fresh water (FW)	Input	m3	0.1128	0.00001406	0.006754	0.000331	0.00001676	18.07	0.00005439	0.0004085	0.0001056	-0.004387
Hazardous waste disposed (HWD)	Output	kg	0.05964	0.00001136	0.0003516	0.0001877	0	0.1199	0.00004396	0.00001356	0.04419	-0.002084
Non hazardous waste dispose (NHWD)	Output	kg	1.343	0.006036	0.02401	0.1189	0.1569	14.39	0.02335	0.01838	0.1483	-0.07512
Radioactive waste disposed (RWD)	Output	kg	0.0003436	8.253E-7	0.000002013	0.00002642	0	0.001672	0.000003192	6.854E-7	2.869E-7	-0.00001651
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.01664	0	0.146	0	0	0.1921	0.000006018	-0.000205
Materials for energy recovery (MER)	Output	kg	0	0	0.002729	0	0.0003148	0	0	0.06709	1.472E-7	-0.00002689
Exported electrical energy (EEE)	Output	MJ	0	0	0.002531	0	0.008976	0	0	0.1034	0.000009548	-0.00006995
Exported thermal energy (EET)	Output	MJ	0	0	0.03829	0	0.1358	0	0	1.565	0.0001445	-0.001058

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	135.1	0.1257	2.567	3.849	0.03551	186.7	0.4864	0.3294	0.1382	-5.467
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.002692	2.283E-7	8.916E-7	0.000005195	6.179E-8	0.00102	8.831E-7	2.403E-7	6.438E-8	-0.0006816
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.09258	0.00002546	0.001514	0.004202	0.00001202	0.1069	0.00009849	0.0001575	0.0000551	-0.03104
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.2093	0.000003314	0.0004429	0.00009668	0.2657	0.3782	0.00001282	0.00006403	0.00000837	-0.001114
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	11.51	0.008511	0.2872	0.2726	0.002539	13.68	0.03292	0.1905	0.01757	-0.4241
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	11.33	0.008517	0.2877	0.2727	0.2683	14.11	0.03295	0.1906	0.01765	-0.4252
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.02171	0.000003112	0.00004521	0.0001358	8.396E-7	0.05643	0.00001204	0.00007713	0.00007805	1.213E-7
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	11.59	0.008517	0.2716	0.2727	0.002539	14.09	0.03295	0.1906	0.01765	-0.4231
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001545	7.983E-8	0.000006411	0.00000174	2.084E-8	0.0009839	3.088E-7	0.00000104	4.187E-7	-0.0001765
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01254	0.000005013	0.0003136	0.001011	0.000003976	0.01175	0.00001939	0.00003868	0.00002129	-0.001546
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.1423	0.00005605	0.003452	0.01126	0.00004304	0.1529	0.0002168	0.0004201	0.0001451	-0.02156
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.04559	0.00002099	0.0009152	0.003042	0.00001237	0.04113	0.00008119	0.0001116	0.00006115	-0.006099
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00001216	1.846E-9	4.321E-9	6.007E-8	5.36E-10	9.381E-7	7.16E-9	2.197E-9	9.74E-10	-0.0007182
Water (user) deprivation potential (WDP)	m3 world eqv.	407.4	0.041	0.4121	2.549	0.04501	728.2	0.1586	3.009	0.8857	16.72

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.4423	0.0005226	0.002239	0.01669	0.000152	3.388	0	0.002022	0.001628	0.0003939	-0.01944
Potential incidence of disease due to PM emissions (PM)²	disease incidence	6.086E-7	5.55E-10	2.042E-8	9.637E-9	1.78E-10	7.664E-7	0	2.129E-9	9.98E-10	1.002E-9	-6.387E-8
Potential Soil quality index (SQP)²	unitless	36.64	0.08616	0.5445	1.857	0.02383	94.05	0	0.3333	0.07536	0.3491	-5.536
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	6.311E-7	9.5E-11	3.671E-9	1.923E-9	6E-11	9.566E-7	0	3.87E-10	2.758E-8	3.23E-10	-1.025E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.391E-8	0	8.1E-11	0	1E-12	4.061E-8	0	0	4.69E-10	4.1E-11	-1.31E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	774.8	0.1019	7.508	2.623	0.04736	850.8	0	0.3943	0.874	49.73	-230.2