Process Data set: RMC 16 MPa Kantsten CEM II/A-LL 42,5 R (en)

Process Data set: RMC 16 MPa Kantsten CEM II/A-LL 42,5 R (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Denmark
Reference year	2025
Name	RMC 16 MPa Kantsten CEM II/A-LL 42,5 R
Technical purpose of product or process	Specifik product EPD for concrete with CEM II/A-LL 42,5 R. Target strength 16 MPa The addition of steel and plastic fibres to the concrete is not covered by this EPD Ready mixed concrete
Classification	Class name : Hierarchy level EPDNorge: Construction / Finished concrete
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Heidelberg Materials Beton Danmark A/S
Quantitative reference
Reference flow(s)	RMC 16 MPa Kantsten CEM II/A-LL 42,5 R - 1.0 * 1.0 m3 (Volume)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-01-20 - 2030-01-20
Publication date	2025-01-20
Technological representativeness
Technology description including background system	Exposure classes: None Produced according to Heidelberg Materials own Quality Assurance system Workability type: Slump

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 020:2018 Part B for Concrete and concrete elements

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 020:2018 Part B for Concrete and concrete elements

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8780-8440_RMC-16-MPa-Kantsten-CEM-II-A-LL-42-5-R.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Jane Anderson

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-11T09:40:59
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	62ce8e03-0606-4157-a641-bb7fd29a0d29
Date of last revision	2025-01-17T12:43:01.1144691Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8780-8440
Owner of data set	Heidelberg Materials Beton Danmark A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	85.22	1.804	14.72	1.032	0.6957	1.032	25.47	0.1598	-20.35
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.6981	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	85.92	1.804	14.72	1.032	0.6957	1.032	25.47	0.1598	-20.35
Use of non renewable primary energy (PENRE)	Input	MJ	523.9	184.5	54.77	82.03	127.7	82.03	49.5	10.38	-91.73
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	2.259	0	0	0	0	0	0	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	526.1	184.5	54.77	82.03	127.7	82.03	49.5	10.38	-91.73
Use of secondary material (SM)	Input	kg	14.16	0	0.004098	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	1.69	0.06499	0.5296	0.03609	0	0.03609	0	0.003301	-0.4161
Use of non renewable secondary fuels (NRSF)	Input	MJ	243.1	0.2423	0.05956	0.121	0	0.121	0	0.009493	-0.4275
Use of net fresh water (FW)	Input	m3	2.826	0.0153	0.1279	0.009333	0.006573	0.009333	0.08477	0.01237	-3.192
Hazardous waste disposed (HWD)	Output	kg	0.05062	0.008496	0.02615	0.004488	0.003759	0.004488	0.004943	0	-0.02095
Non hazardous waste dispose (NHWD)	Output	kg	1.99	10.67	0.9932	7.129	0.1512	7.129	0.1562	75.14	-0.6353
Radioactive waste disposed (RWD)	Output	kg	0.003093	0.001276	0.0002805	0.00056	0.0008868	0.00056	0.0005233	0	-0.0006893
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.00854	0	83.96	0	0	0	2244	0	0
Materials for energy recovery (MER)	Output	kg	0.001205	0	0.0678	0	0	0	0	0	0
Exported electrical energy (EEE)	Output	MJ	0.003503	0	0.03819	0	0	0	0	0	0
Exported thermal energy (EET)	Output	MJ	0.01619	0	0.5777	0	0	0	0	0	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	507.8	184.4	54.75	82.02	127.7	82.02	49.48	10.38	-86.9
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	43.99	0.0001493	0.00004566	0.00008998	0.00001424	0.00008998	0.00002022	0.000002847	-0.0004561
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.3085	0.1798	0.01717	0.01626	0.09707	0.01626	0.0129	0.00314	-0.04624
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.1046	0.004094	-0.008178	0.002163	0.00174	0.002163	0.01376	0.0002737	-0.1025
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	107.3	12.69	3.92	5.049	9.276	5.049	1.593	0.3217	-5.137
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	107.4	12.7	3.928	5.053	9.276	5.053	1.616	0.3221	-5.243
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.01237	0.003694	0.01685	0.001538	0.0007314	0.001538	0.002205	0.0000631	-0.003473
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	107.2	12.7	4.424	5.053	9.276	5.053	1.595	0.3221	-5.496
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.00174	0.00007131	0.0001194	0.00004018	0.00003378	0.00004018	0.0001007	0.000002401	-0.0001365
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.08034	0.04296	0.005078	0.00356	0.04285	0.00356	0.00378	0.001177	-0.01604
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.8016	0.4794	0.05714	0.03971	0.4638	0.03971	0.04354	0.01297	-0.1885
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.2478	0.1307	0.01556	0.01559	0.1293	0.01559	0.01166	0.003712	-0.04975
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000002687	0.000002795	5.966E-7	0.000001217	0.000002004	0.000001217	3.141E-7	1.567E-7	-9.357E-7
Water (user) deprivation potential (WDP)	m3 world eqv.	1.151E+4	106.9	276.6	62.88	27.13	62.88	5461	21.86	-4075

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	5.574	0.8053	0.2245	0.3585	0.5566	0.3585	0.8302	0.04506	-0.7976
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002067	7.661E-7	2.528E-7	4.638E-7	0.00001175	4.638E-7	2.064E-7	6.687E-8	-9.851E-7
Potential Soil quality index (SQP)²	unitless	-86.37	147.7	49.27	94.02	15.51	94.02	27.98	37.85	197.3
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	8.905E-7	8.621E-8	4.278E-8	5.798E-8	6.493E-8	5.798E-8	3.141E-8	3.005E-9	-1.099E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.387E-8	0	1.466E-9	0	2.319E-9	0	2.244E-9	1.5E-10	-4.488E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2236	120.5	51.09	59.97	69.8	59.97	35.07	5.135	-89.47