Process information
| Key Data Set Information | |
| Location | DK |
| Geographical representativeness description | Denmark, Sweden, Norway, Finland & UK |
| Reference year | 2024 |
| Name |
|
| Use advice for data set | Module A1: Packaging has been included by average use of packaging pr. 1 kg of product. Module A4: The transportation distances provided in this EPD are derived from precise data concerning the distances between production facility and and various sales departments in different countries. Subsequently, it is assumed that the distribution from each of these sales departments to the end customers an approximate distance of 300 km*. *Transportation by truck is assumed on a distributon of 80% EURO 6 and 20% EURO 5, based on data from the companys own logistics provider. Module C2: The estimated transportion distance to the waste handling facility in this EPD is 100 km, assuming the use of a truck as the transport method. |
| Technical purpose of product or process | Roth QuickBox®-red is developed to meet today’s requirements for corrosion-resistant installations. Roth QuickBox®-red can be used for wall or panel wall (additional accessories required) for 15 mm PEX pipes in a 25 mm corrugated pipe. Roth QuickBox®-red is made of transparent, molded plastic with a pre-mounted red brass elbow and pressure testing plug. The pre-mounted sealing nipple and lock are approved according to NT VVS 129 and meets the requirements of the SBI 252 guidelines. Roth’s QuickBox®-red is delivered as a single box with a push-fit coupling for 15 mm. The push-fit coupling ensures a quick and secure connection. Armaturfix can be used where a double box for the wall is desired. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | 2024-12-16 - 2029-12-16 |
| Technological representativeness | |
| Technology description including background system | The plastic housing is molded in transparent polycarbonate (PC). The sealing nipple is made of glass fiber reinforced PP with lips of TPR. The lock for the corrugated pipe is made of GF reinforced ABS. The gasket for the elbow is made of EPDM rubber. The push-fit elbow is made of red brass with a ½” internal thread. The integrated locking ring in the elbow is made of stainless steel, the O-ring is made of EPDM rubber, and the release ring and support ring are made of acetal plastic. The included liner is made of stainless steel AISI/SUS 316. |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-09-01T01:36:57 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 624f39eb-b560-4637-9436-9518ad71db42 |
| Date of last revision | 2024-12-12T11:09:26.656275Z |
| Data set version | 00.09.000 |
| Registration authority | |
| Registration number | NEPD-8514-8180 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle