Process Data set: Inspire R 300 TW Dali (en)

Process Data set: Inspire R 300 TW Dali (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Inspire R 300 TW Dali
Technical purpose of product or process	Inspire R TW is a rectangular recessed downlight for indoor use. With cubist black reflectors it has very low glare and harmonious non-flickering light with a well-defined light pattern.Inspire R TW is suitable for use in high-end residential and commercial environments.Tunable White from 2000-4000K or 2700-6500K. Controlled by TW LEDDim or DALI Type 8 (DALI Type 8 only version 300). System Wattage: 17.0 W. Luminous flux: 970lm (@4000K). Efficacy: 57 lm/W. Colour temperature: 2000-4000K. Colour rendering: Ra>90. MacAdams factor: SDCM: 2. Lifetime: L90/B10>100,000, . Light distribution: Direct. Control/Dimming: Tunable White DALI Type 8. Luminiare class: Class II SELV. Housing: Aluminium. Optics: . Height: 40.0mm. Length: 303.0 mm. Width: 62.0 mm. EAN: 7021982124457 The EPD also covers the following products: EAN: 7021982124464 - INSPIRE R 300 BLACK 2000-4000K TW DALI DT8 EAN: 7021982124518 - INSPIRE R 300 WHITE 2700-6500K TW DALI DT8 EAN: 7021982124532 - INSPIRE R 300 BLACK 2700-6500K TW DALI DT8 Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Inspire R 300 TW Dali - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.075261530404 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-06-04 - 2030-06-04
Publication date	2025-06-04
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/inspire-r-tw/212445/pdf/specification_212445.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/702710_Inspire%20R%20TW%20LEDDim/50/702710_Inspire%20R%20TW.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11313-11269_Inspire-R-300-TW-Dali.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-08-06T16:18:50
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	5bedef8d-cd1f-475a-8dc1-bb555d95bb3b
Date of last revision	2025-06-03T14:02:16.5421741Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11313-11269
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	23.09	0.001804	0.3153	0.05357	0.0006053	2556	0.006743	0.08773	0.06238	-2.183
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.9877	0	0	0	-0.9877	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	24.08	0.001804	0.3153	0.05357	-0.9871	2556	0.006743	0.08773	0.06238	-2.183
Use of non renewable primary energy (PENRE)	Input	MJ	197.7	0.1594	3.144	4.715	0.03677	197.6	0.5958	0.6388	0.2137	-11.84
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	6.438	0	0	0	0	0	0	-7.749	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	204.1	0.1594	3.144	4.715	0.03677	197.6	0.5958	-7.11	0.2137	-11.84
Use of secondary material (SM)	Input	kg	0.4657	0	0	0	0	0	0	0	0.001504	0.006833
Use of renewable secondary fuels (RSF)	Input	MJ	0.303	0.00003529	0.000273	0.001765	0.00002008	2.007	0.0001319	0.001453	0.0002248	0.001124
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.08819	0.0002996	0.002582	0.009458	0.00008277	5	0.00112	-0.00005702	0.01305	-0.05328
Use of net fresh water (FW)	Input	m3	0.1657	0.00001783	0.008273	0.0004054	0.00001735	19.09	0.00006662	0.0006868	0.0001521	-0.009394
Hazardous waste disposed (HWD)	Output	kg	0.0845	0.00001441	0.0004307	0.0002299	0	0.1267	0.00005384	0.00002779	0.07296	-0.003877
Non hazardous waste dispose (NHWD)	Output	kg	1.97	0.007653	0.02941	0.1456	0.1625	15.2	0.0286	0.03759	0.1827	-0.1608
Radioactive waste disposed (RWD)	Output	kg	0.0005311	0.000001046	0.000002466	0.00003236	0	0.001767	0.00000391	0.000001392	3.436E-7	-0.00003665
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.02038	0	0.1511	0	0	0.2111	0.000008565	-0.0002787
Materials for energy recovery (MER)	Output	kg	0	0	0.003342	0	0.0003148	0	0	0.09548	2.095E-7	-0.0000366
Exported electrical energy (EEE)	Output	MJ	0	0	0.0031	0	0.009293	0	0	0.147	0.00001359	-0.00009373
Exported thermal energy (EET)	Output	MJ	0	0	0.0469	0	0.1406	0	0	2.224	0.0002056	-0.001418

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	204.1	0.1594	3.144	4.715	0.03677	197.3	0.5958	0.6386	0.2135	-11.84
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.004422	2.894E-7	0.000001092	0.000006363	6.397E-8	0.001078	0.000001082	4.743E-7	1.022E-7	-0.001403
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1347	0.00003228	0.001854	0.005147	0.00001245	0.1129	0.0001206	0.0002923	0.00008638	-0.0622
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.1993	0.000004201	0.0005424	0.0001184	0.2751	0.3996	0.0000157	0.0001222	0.00001399	-0.002481
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	17.07	0.01079	0.3518	0.3339	0.002628	14.45	0.04032	0.2886	0.02697	-0.9133
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	16.9	0.0108	0.3524	0.334	0.2778	14.91	0.04035	0.2888	0.02711	-0.9167
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.03085	0.000003945	0.00005537	0.0001663	8.693E-7	0.05963	0.00001474	0.0001401	0.0001319	-0.0008302
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	17.17	0.0108	0.3326	0.334	0.002629	14.88	0.04035	0.2888	0.02711	-0.9145
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.002224	1.012E-7	0.000007853	0.000002131	2.158E-8	0.00104	3.783E-7	0.000002018	6.943E-7	-0.0003489
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01911	0.000006355	0.0003841	0.001238	0.000004117	0.01241	0.00002375	0.00006742	0.00003142	-0.003131
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.218	0.00007106	0.004229	0.01379	0.00004457	0.1616	0.0002656	0.0007377	0.0002179	-0.0434
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.07153	0.00002661	0.001121	0.003726	0.00001281	0.04345	0.00009945	0.0001985	0.00009522	-0.01233
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00001612	2.344E-9	5.292E-9	7.357E-8	5.54E-10	9.912E-7	8.769E-9	4.21E-9	1.391E-9	-0.0009989
Water (user) deprivation potential (WDP)	m3 world eqv.	598	0.05198	0.5047	3.123	0.0466	769.4	0.1943	5.949	1.039	2.369

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.6852	0.0006626	0.002743	0.02044	0.0001573	3.58	0	0.002476	0.003178	0.0005369	-0.04282
Potential incidence of disease due to PM emissions (PM)²	disease incidence	9.029E-7	7.02E-10	2.501E-8	1.18E-8	1.83E-10	8.097E-7	0	2.607E-9	1.894E-9	1.578E-9	-1.277E-7
Potential Soil quality index (SQP)²	unitless	58.74	0.1092	0.6669	2.275	0.02467	99.37	0	0.4082	0.1508	0.547	-10.54
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	8.928E-7	1.22E-10	4.497E-9	2.354E-9	6.2E-11	0.000001011	0	4.74E-10	5.615E-8	5.19E-10	-1.817E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.001E-8	0	9.9E-11	0	1E-12	4.291E-8	0	0	9.56E-10	6.8E-11	-2.459E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1191	0.1292	9.196	3.212	0.04904	899	0	0.483	1.553	53.54	-453