Process Data set: Roth QuickTemp ClimaComfort® systemplate (en)

Process Data set: Roth QuickTemp ClimaComfort® systemplate (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Denmark, Sweden, Norway, Finland and UK
Reference year	2025
Name	Roth QuickTemp ClimaComfort® systemplate
Use advice for data set	Module A1: Packaging has been included by average use of packaging pr. 1 m2 of product. Module A4: The transportation distances provided in this EPD are derived from precise data concerning the distances between production facility and various sales departments in different countries. Distribution from each of the sales departments to the end customers a distance of 300 km* is assumed. *Transportation by truck is assumed on a distribution of 80% EURO 6 and 20% EURO 5, based on data from the company's own logistics provider. Module A5/C1: Manual installation and demolition has been assumed. Module C2: The estimated transportation distance to the waste handling facility in this EPD is 100 km, assuming the use of a truck as the transport method.
Technical purpose of product or process	With a structural height of only 17 mm, the Roth QuickTemp ClimaComfort® system is designed for installation on existing or new surfaces. The system is especially suitable for renovations, where the installation height is often crucial. The structure has a low weight, and the underfloor heating pipes are close to the surface. This creates a much faster response time in terms of underfloor heating than with a traditional screed/concrete underfloor heating structure.
Classification	Class name : Hierarchy level EPDNorge: Construction / Building boards
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included when specific information are missing. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Roth North Europe A/S
Quantitative reference
Reference flow(s)	Roth QuickTemp ClimaComfort® systemplate - 1.0 * 1.0 qm (Area)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.112576869319 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-07-07 - 2030-07-07
Publication date	2025-07-07
Technological representativeness
Technology description including background system	The Roth QuickTemp ClimaComfort® system is a quick-regulating underfloor heating system that is easy to install in all types of buil;ding. This is a result of the specially developed system plate and the special Roth QuickTemp ClimaComfort®FLOW self-levelling and fibre;reinforced filling compound.

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 010:2022 Part B for building boards

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 010:2022 Part B for building boards

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11667-11604_Roth-QuickTemp-ClimaComfort---systemplate.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-09-21T12:03:05
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	4ea8562e-9827-4ce8-9cc3-c9928250cc9e
Date of last revision	2025-07-01T15:19:58.5058006Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11667-11604
Owner of data set	Roth North Europe A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Production A1-A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	10.14	0.09352	0.06914	0.005874	0.1131	0.003827	-11.41
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	2.289	0	-1.566	0	-0.7229	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	12.43	0.09352	-1.497	0.005874	-0.6099	0.003827	-11.41
Use of non renewable primary energy (PENRE)	Input	MJ	114.7	6.42	0.7918	0.4163	0.8716	0.03948	-1.847
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	33.57	0	0	0	-33.57	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	148.3	6.42	0.7918	0.4163	-32.7	0.03948	-1.847
Use of secondary material (SM)	Input	kg	1.408	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	1.031	0.00346	0.02025	0.0002102	0.002538	0.00007543	-0.001998
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.05255	0.01204	0.0007193	0.0007505	0	0.005334	-0.6763
Use of net fresh water (FW)	Input	m3	0.06964	0.0006972	0.0002987	0.00004383	0.001096	0.00005682	-0.01374
Hazardous waste disposed (HWD)	Output	kg	0.06741	0.0003326	0.0001917	0.00002123	0	0.03829	-0.00008681
Non hazardous waste dispose (NHWD)	Output	kg	0.8688	0.3039	0.2028	0.01989	0.126	0.0276	-0.04364
Radioactive waste disposed (RWD)	Output	kg	0.0003494	0.00004372	0.000004169	0.000002838	0	1.123E-7	-0.000009669
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.05624	0	0.1792	0	0	0	0
Materials for energy recovery (MER)	Output	kg	0.02789	0	0.01412	0	1.465	0	0
Exported electrical energy (EEE)	Output	MJ	0.02404	0	0.01159	0	1.407	0	0
Exported thermal energy (EET)	Output	MJ	0.3637	0	0.1754	0	21.28	0	0

Core environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	117.5	6.42	0.7917	0.4162	0.8649	0.03947	-1.847
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00004407	0.0000115	6.761E-7	7.477E-7	6.365E-7	1.832E-8	-0.000001285
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.02186	0.00142	0.000259	0.0001128	0.0007465	0.00001613	-0.001064
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.1641	0.0001809	0.3247	0.00001125	0.08892	0.000002897	-0.0002667
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	7.365	0.4267	0.05792	0.0276	3.047	0.006809	-0.1292
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	7.209	0.4271	0.3827	0.02762	3.136	0.006813	-0.1339
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.007428	0.0001705	0.00003903	0.000009649	0.00004109	7.539E-7	-0.004449
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	7.607	0.427	0.06038	0.02762	2.978	0.007005	-0.1319
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0002942	0.000003456	0.000004115	2.168E-7	0.00000367	7.235E-8	-0.00001148
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.004764	0.0003447	0.0000532	0.00003346	0.0003253	0.000004508	-0.0003479
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.05246	0.003832	0.0006407	0.0003701	0.003317	0.00005219	-0.003761
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.01501	0.001305	0.0001738	0.0001133	0.0008158	0.00001449	-0.001037
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	9.141E-7	9.607E-8	7.771E-9	6.293E-9	1.961E-8	4.33E-10	-0.00941
Water (user) deprivation potential (WDP)	m3 world eqv.	491	6.301	3.884	0.3971	2.169	0.7706	-23

Additional environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.3281	0.02809	0.003027	0	0.001819	0.003126	0.0002068	-0.0118
Potential incidence of disease due to PM emissions (PM)²	disease incidence	1.955E-7	2.652E-8	3.145E-9	0	1.987E-9	5.996E-9	1.44E-10	-6.448E-8
Potential Soil quality index (SQP)²	unitless	48.57	4.491	0.2812	0	0.287	0.2618	0.111	-12.35
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	5.202E-8	5.048E-9	6.24E-10	0	3.31E-10	5.173E-9	1.89E-10	-9.629E-9
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.524E-9	0	1.4E-11	0	0	2.22E-10	5E-12	-1.85E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	101.7	4.755	0.6081	0	0.3066	3.704	0.09817	-10.05