Process Data set: EST170-C43L (en) - EPD Global Digi Node

Process Data set: EST170-C43L (en) en

Process information

Key Data Set Information
Location	CZ
Geographical representativeness description	Norway
Reference year	2024
Name	EST170-C43L
Use advice for data set	The system includes the production of raw materials (A1), the transport of these raw materials to manufacturing facility (A2), manufacturing with raw material preparation, cold pressing, drying, firing, and glazing (A3), transport to market (A4), installation (A5), and end-of-life stages (C1-C4, D).
Technical purpose of product or process	With the new EST dry outdoor termination, PFISTERER offers a self-supporting, dry and compact termination up to 170 kV. It reliably connects cable systems with overhead lines and busbars in maintenance-free long-term use. The EST self-supporting outdoor termination meets all criteria of the highest pollution class according to IEC 60815-3. Expected service life after installation 40 years. EST170-C43L weight approx 152 kg During the transportation, the product will weigh approximately 185 kg.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Maxeta AS
Quantitative reference
Reference flow(s)	EST170-C43L - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 12.50000001 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-11-08" - "2029-11-08"
Publication date	2024-11-08
Technological representativeness
Technology description including background system	Datasheet: https://catalogue.pfisterer.com/en/est170-c43l/ General information: https://catalogue.pfisterer.com/en/connections-52-550-kv/cable-accessories/cable-terminations/

Modelling and validation

Subtype

specific dataset

LCA methodology report

PCR EPD Italy 10 - Insulators

Data sources, treatment and representativeness

Documentation of data quality management

PCR EPD Italy 10 - Insulators

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-7994-7658_EST170-C43L.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-27T13:13:44
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	47132844-185b-4cc9-8794-9a29ad404cd6
Date of last revision	2024-11-04T08:45:27.9640904Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-7994-7658
Owner of data set	Maxeta AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Production A1-A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	3.68E+3	8.565	0.1949	0.4608	1	0.7123	-2067
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	419.7	0	-419.7	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	4.1E+3	8.565	-419.5	0.4608	1	0.7123	-2067
Use of non renewable primary energy (PENRE)	Input	MJ	1.333E+4	606.9	9.487	32.65	17.68	5.113	-4133
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	943.4	0	0	0	-857.6	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	1.428E+4	606.9	9.487	32.65	-839.9	5.113	-4133
Use of secondary material (SM)	Input	kg	0	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	19.86	0.3065	0.005686	0.01649	0.02173	0.01478	-0.7028
Use of non renewable secondary fuels (NRSF)	Input	MJ	3.745	1.094	0.06476	0.05887	0.1829	0.006395	-33.76
Use of net fresh water (FW)	Input	m3	31.06	0.06391	0.006907	0.003438	0.1411	0.00669	-8.709
Hazardous waste disposed (HWD)	Output	kg	4.389	0.03095	0	0.001665	1.351	0.6213	1.333
Non hazardous waste dispose (NHWD)	Output	kg	169.5	29.01	3E+1	1.561	1.294	15.58	-94.54
Radioactive waste disposed (RWD)	Output	kg	0.05787	0.004138	0	0.0002226	0.000006707	0.00003568	-0.01701
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.1135	0	0.0007097	0	35.74	0	0
Materials for energy recovery (MER)	Output	kg	0.2153	0	3E+1	0	50.88	0	0
Exported electrical energy (EEE)	Output	MJ	0.1436	0	20.86	0	78.18	0	0
Exported thermal energy (EET)	Output	MJ	2.172	0	315.6	0	1183	0	0

Core environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	1.427E+4	606.9	9.486	32.65	17.68	5.113	-4133
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.01919	0.00109	0.00001309	0.00005865	0.00001382	0.000001696	0.0004195
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	5.374	0.1645	0.006491	0.008851	0.02686	0.001724	-2.206
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-34.85	0.01641	45.84	0.0008829	0.00269	0.000002574	-1.473
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	925.8	40.25	0.8073	2.165	120.6	0.225	-324.2
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	900.4	40.28	46.64	2.167	120.6	0.2251	-331.9
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	9.444	0.01407	0.000207	0.0007569	0.0005083	0.0000863	-6.265
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	945.5	40.28	0.8075	2.167	124.8	0.4151	-317
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.04311	0.0003161	0.000009675	0.000017	0.00002523	0.000004058	-0.01288
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.7611	0.04879	0.002785	0.002625	0.01276	0.0006166	-0.2896
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	8.439	0.5396	0.02983	0.02903	0.131	0.006947	-3.184
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	2.87	0.1652	0.007668	0.008888	0.03164	0.001965	-1.061
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.0002239	0.000009176	1.289E-7	4.936E-7	2.744E-7	6.193E-8	-0.4996
Water (user) deprivation potential (WDP)	m3 world eqv.	2.044E+5	579	14.6	31.15	133.8	132	-1.831E+5

Additional environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	62.8	2.653	0.03439	0	0.1427	0.0472	0.03421	-18.18
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.00005022	0.000002898	7.935E-8	0	1.559E-7	1.206E-7	2.969E-8	-0.00002559
Potential Soil quality index (SQP)²	unitless	4829	418.4	5.318	0	22.51	6.36	8.91	-690.1
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.00002495	4.829E-7	5.766E-8	0	2.598E-8	3.223E-7	7.794E-9	-0.000009873
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	0.000001706	0	1.2E-9	0	0	7.074E-9	4.33E-10	-8.134E-7
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1.885E+4	447	10.8	0	24.05	257	9483	-5325