Process Data set: LAPP ÖLFLEX CLASSIC 115 CY 2X0,75 BK Elnr 1025152 (en) en
Process information
| Key Data Set Information | |
| Location | FR |
| Geographical representativeness description | Norway |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | 1m LAPP ÖLFLEX CLASSIC 115 CY 2X0,75 BK Elnr 1025152 |
| Technical purpose of product or process | ÖLFLEX CLASSIC 115 CY BK cables are control cables for occasional flexible use and fixed installation under medium mechanical load conditions. They are also suitable for use in dry, damp or wet areas. They are suitable for outdoor use if the indicated temperature range is observed. They are largely resistant to acids, alkalis and certain oils at room temperature. ÖLFLEX CLASSIC 115 CY BK cables are suitable for occasional, non-automated movements. They meet the requirements for slow rotational movements, such as in the loop of a wind turbine. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and operation. Compulsory guidance is not permitted. The screening braid protects against interference from electrical fields. Application range: Control units for machine tools, conveyor systems, measurement and control technology, office machines and systems for data processing. This cable is suitable for torsion application in wind turbines (WTG). The torsional load is limited to applications, as they typically occur in the loop of a wind turbine. Design based on EN 50525-2-51 Certification EN 13501-6 and EN 50575 Classification of fire behaviour (article/dimension range see www.lappkabel.com/cpr) Conductor fine wire strands of bare copper acc. to IEC 60228 resp. EN IEC 60228, class 5 Insulation PVC compound TI2 acc. to EN 50363-3 with increased requirements acc. to Lapp specification Core identification code acc. to VDE 0293-1, with or without GN/YE ground conductor black cores with white numbers acc. to EN 50334 Cable assembly cores are stranded in layers Wrapping plastic foil Screen braid of tinned copper, coverage = 85 % (nominal value) Outer sheath PVC compound TM2 acc. to EN 50363-4-1 with increased requirements acc. to LAPP specification colour: black, similar RAL 9005 |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-04-30 - 2030-04-30 |
| Technological representativeness | |
| Technology description including background system | Electrical properties at 20 °C Specific volume resistivity > 20 G ? x cm Transfer impedance max. 250 m?/m (at 30 MHz) Nominal voltage U0/ U: 300 / 500 V Test voltage core / core: 4000 V AC core / screen: 2000 V AC Mechanical and thermal properties Minimum bending radius occasional flexing: 20 x outer diameter fixed installation: 6 x outer diameter Temperature range occasional flexing: - 5°C up to +70°C max. conductor temperature fixed installation: - 40°C up to +80°C max. conductor temperature Torsional stress Torsion movement in wind turbine generators TW-0 (5000 cycles at =+5 °C) TW-1 (2000 cycles at =-20 °C) ±150 °/m at 1 revolution per minute Flammability flame retardant acc. to IEC 60332-1-2 resp. EN 60332-1-2 UV resistance Acc. to EN 50525-1 cables with black sheath are suitable for permanent outdoor use. acc. to EN 50618 acc. to EN 50620 acc. to EN ISO 4892-2-2013, method A (change of colour allowed) . Tests acc. to IEC 60811 resp. EN 60811, EN 50395, EN 50396 General requirements These cables are conform to the EU-Directive 2014/35/EU (Low Voltage Directive). A part of these cables (see www.lappkabel.com/cpr) are classified in accordance with the EU-Regulation no. 305/2011 (CPR). Environmental information These cables meet the substance-specific requirements of the EU Directive 2011/65/EU (RoHS) |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-05-19T13:58:04 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 3294dd04-ef4c-4550-bcf6-83933f9a27e9 |
| Date of last revision | 2025-04-28T14:47:13.3727789Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-9902-9857 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle