Process information
| Key Data Set Information | |
| Location | SE |
| Geographical representativeness description | World wide |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | Fabric used in the calculation is Camira Oceanic, a 100% post-consumer recycled polyester A3 Data Collection (Production Phase) Data for the A3 module, encompassing the production phase, was collected in 2024. This data includes all relevant inputs and outputs associated with manufacturing processes. A4 Data Collection (Transport to Customer) Transport data for the A4 module was sourced from Trafa.se and reflects operations during the years 2021-2022. According to statistics from Trafikanalys, the average distance covered by a Swedish heavy-duty truck transporting furniture in domestic traffic was approximately 143 kilometers in 2022, with an average of 153 kilometers for the period 2012–2022. These values are based on representative industry conditions and account for the most recent data on logistics efficiency and route optimization. A5 Data (Packaging Disposal) For the A5 module, it is assumed that packaging materials are automatically handled and disposed of in alignment with standard waste management practices at this stage. This assumption aligns with typical end-of-life scenarios for packaging in regulated waste systems. Maintenance Data (B2 Module) Maintenance requirements are calculated based on typical cleaning scenarios over the product's lifespan, assumed to be 15 years: For Cleaning with wet cloth, Assume 0,0005 m3 (½ liter) once a month for 15 years |
| Technical purpose of product or process | The Speed Table, designed by Johan Lindstén, is a minimalist and versatile table available in two heights – 47 cm and 57 cm – suitable for use either individually or in combination. The frame is made of powder-coated or chrome-plated steel, offering both strength and aesthetic appeal. Tabletops are available in a wide selection of laminate or veneer finishes, including oak, birch, ash, walnut, and colored laminates, with various edge profiles (Discus or Basic). The product is designed and manufactured by Johanson Design AB in Markaryd, Sweden, and is characterized by its soft, rounded frame and wide range of customization surface finishes – over 400 RAL color options are available for the metal parts. All metal components are recyclable, coatings are applied using electrostatic epoxy powder to minimize waste, and only water-based adhesives free from solvents are used. The Speed Table combines Scandinavian craftsmanship with sustainability and timeless design, making it suitable for a wide range of interior applications in both private and public environments This declaration focuses on an in-depth study of Speed table 47 with Ø50 tabletop The table on page 12 of this declaration provides the key environmental indicators for the other models within the product family |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-10-24 - 2030-10-24 |
| Technological representativeness | |
| Technology description including background system | Volume 0.14 m³ - (excluding packaging) Base: Volume 0.09 m³ - (including packaging) Tabletop: Volume 0.03 m³ - (including packaging) Total height 57 cm Total width 55 cm Total depth 55 cm Complied with technical standards: EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic tables. Test severity 2 Möbelfakta certified You can find all certifications and test results here: https://johansondesign.com/downloads/certificate |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-10-28T14:16:32 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 3154e47c-9fc9-478e-a14e-72639feb2cdd |
| Date of last revision | 2025-10-23T09:58:47.5750592Z |
| Data set version | 00.02.001 |
| Registration authority | |
| Registration number | NEPD-12733-12970 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle