Process Data set: AXQJ 4x95/29-AS 0.6/1kV (en)

Process Data set: AXQJ 4x95/29-AS 0.6/1kV (en) en

Process information

Key Data Set Information
Location	SE
Geographical representativeness description	Sweden
Reference year	2024
Name	AXQJ 4x95/29-AS 0.6/1kV
Use advice for data set	The analysis is a cradle-to-grave study made for 1 m of cable manufactured , installed and used outdoor over the lifetime 40 years. Modules A1-A5 are included in the analysis. It includes the extraction and production of raw materials, transportation to the factory, the production process itself, transportation to market and installation of the product. Modules B1-B7 describe the use phase and are declared for an outdoor cable. B6 is the operational energy usage based on a normal use. C1-C4, D are mandatory modules which include end of life treatment of materials and the benefits from recycling. The flowchart below illustrates the system boundaries of the analysis:
Technical purpose of product or process	1 kV AXQJ is a halogen-free and flame-retardant cable, 0.6/1kV, suitable for open fixed installations both indoors and outdoors, in soil, air, water, and in conduits. It features copper sector-shaped cores ranging from 50mm² to 300mm², and a screen of annealed copper wire with counter helix.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Amokabel AB
Quantitative reference
Reference flow(s)	AXQJ 4x95/29-AS 0.6/1kV - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.135000000108 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-12-06" - "2029-12-06"
Publication date	2024-12-06
Technological representativeness
Technology description including background system	1Maximum Conductor Temperature: -20°C to +90°C Voltage Rating U0/U: 0.6/1kV Stranded, sector-shaped, annealed aluminum according to EN 60228 Class 2

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8382-7999_AXQJ-4x95-29-AS-06-1kV.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-12-31T01:55:43
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	30927af5-0775-43dd-8d5c-e8e9ce1e7dc3
Date of last revision	2024-12-03T07:46:50.9778432Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8382-7999
Owner of data set	Amokabel AB
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	56.72	0.04777	1.446	0.02662	0.002339	0.3197	0.006486	0.003928	0.02129	-26.37
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	4.533	0	0	0	-4.533	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	61.26	0.04777	1.446	0.02662	-4.53	0.3197	0.006486	0.003928	0.02129	-26.37
Use of non renewable primary energy (PENRE)	Input	MJ	214.3	3.337	3.029	1.86	0.1138	0.6664	0.4596	0.07986	0.1971	-62.96
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	17.32	0	0	0	0	0	0	-16.98	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	231.7	3.337	3.029	1.86	0.1138	0.6664	0.4596	-16.9	0.1971	-62.96
Use of secondary material (SM)	Input	kg	0.5548	0	0.000001011	0	0.36	0	0	0	0	0.07475
Use of renewable secondary fuels (RSF)	Input	MJ	0.461	0.001709	0.005612	0.0009524	0.00006823	0.001239	0.0002321	0.00008823	0.0004419	-0.002425
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.0461	0.006111	0.01773	0.003405	0.0007771	0.003914	0.0008287	0	0.000483	-0.172
Use of net fresh water (FW)	Input	m3	0.3391	0.0003569	0.00329	0.0001989	0.00008288	0.0007261	0.0000484	0.0005644	0.0002535	-0.1295
Hazardous waste disposed (HWD)	Output	kg	0.1663	0.0001721	0.0003415	0.00009591	0	0.00003479	0.00002344	0	0.01785	0.017
Non hazardous waste dispose (NHWD)	Output	kg	4.238	0.1623	0.06911	0.09044	0.36	0.002196	0.02197	0	0.6844	-1.51
Radioactive waste disposed (RWD)	Output	kg	0.0008355	0.00002273	0.00004537	0.00001267	0	0.00001003	0.000003134	0	0.00000135	-0.0002513
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.0628	0	0.000008516	0	0	0.83	0.00002553	-0.002925
Materials for energy recovery (MER)	Output	kg	0	0	0.00156	0	0.36	0	0	0.2847	6.245E-7	-0.0003852
Exported electrical energy (EEE)	Output	MJ	0	0	0.002118	0	0.2503	0	0	0.4775	0.00004051	-0.0009438
Exported thermal energy (EET)	Output	MJ	0	0	0.03205	0	3.787	0	0	7.225	0.0006129	-0.01428

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	230.9	3.337	3.023	1.86	0.1138	0.665	0.4596	0.07985	0.1971	-62.96
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0008563	0.000006096	0.000001053	0.000003397	1.571E-7	2.271E-7	8.256E-7	5.839E-8	6.551E-8	-0.0002334
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.163	0.0006343	0.0001717	0.0003535	0.00007789	0.00003695	0.0001246	0.0001336	0.00006647	-0.07524
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.3152	0.00009135	0.0006027	0.00005091	0.4939	0.0001153	0.00001243	0.00001194	0.000003009	-0.02299
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	16.81	0.2207	0.02958	0.123	0.009687	0.005675	0.03048	0.7387	0.03835	-5.021
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	16.69	0.2209	0.03185	0.1231	0.5036	0.006158	0.0305	0.7387	0.03835	-5.136
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.1948	0.00007855	0.001668	0.00004378	0.000002484	0.0003685	0.00001065	0.000002131	0.000002857	-0.09147
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	17.15	0.2209	0.03181	0.1231	0.00969	0.006151	0.0305	0.7386	0.04002	-4.779
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001173	0.000001763	0.000001744	9.826E-7	1.161E-7	3.837E-7	2.394E-7	1.074E-7	1.341E-7	-0.0004755
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01776	0.0001255	0.00003008	0.00006994	0.00003342	0.000006293	0.00003695	0.00006396	0.00005759	-0.005912
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.2113	0.001404	0.0003909	0.0007823	0.000358	0.00008284	0.0004087	0.0006658	0.0002666	-0.07297
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.0659	0.0005378	0.00009008	0.0002997	0.00009202	0.00001887	0.0001251	0.0001602	0.00008251	-0.02274
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00000132	4.999E-8	1.28E-8	2.786E-8	1.547E-9	2.782E-9	6.949E-9	1.182E-9	2.485E-9	-0.003052
Water (user) deprivation potential (WDP)	m3 world eqv.	6133	3.228	305.3	1.799	0.1752	67.48	0.4384	0.4787	3.936	-2702

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.888	0.01459	0.1032	0.008128	0.0004127	0	0	0	0	0	0.0228	0	0	0.002009	0.0001846	0.001195	-0.2681
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001134	1.351E-8	1.273E-9	7.53E-9	9.52E-10	0	0	0	0	0	2.66E-10	0	0	2.194E-9	5.68E-10	1.21E-9	-4.367E-7
Potential Soil quality index (SQP)²	unitless	47.57	2.334	1.342	1.301	0.06382	0	0	0	0	0	0.2944	0	0	0.3169	0.01337	0.4778	-9.525
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001447	2.703E-9	1.122E-9	1.506E-9	6.92E-10	0	0	0	0	0	2.43E-10	0	0	3.66E-10	1.406E-9	2.54E-10	-6.198E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	4.425E-8	0	4.6E-11	0	1.4E-11	0	0	0	0	0	1E-11	0	0	0	3.2E-11	1.3E-11	-1.759E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1078	2.474	1.605	1.379	0.1296	0	0	0	0	0	0.3509	0	0	0.3385	0.9835	242.8	-469.2