Process information
| Key Data Set Information | |
| Location | SE |
| Geographical representativeness description | Mainly Europe, but is available world wide |
| Reference year | 2024 |
| Name |
|
| Use advice for data set | The upholstering takes place at Kinnarps' production site in Skillingaryd, where the fabric is also beeing processed. Certain steel components are manufactured at Kinnarps' production site in Jönköping and some are purchased as premanufactured components. Final assembly of the product is done at Kinnarps' production site in Kinnarp. The flow chart below illustrates the system boundaries of the analysis. |
| Technical purpose of product or process | Soon 2 section sofa with upholstered seat and back and 100% recycled polyester fabric. Steel underframe. Armrests are available in wood or completely upholstered as options. From a simple bench or easy chair as starting point, Soon can be configured in infinite sofa combinations – the only limits are space and imagination. Combine bench sections, one-, two- and three-seater sections and straight, arched or round table sections. Armrests are available in wood finish or upholstered. In addition, the back can be supplied in wood. The seat has removable fabric that makes it easy to keep clean and facilitates the extension of the product's lifespan. Read more: https://www.kinnarps.com/products/seating/soft-seating/soon-module/?pr=Soon%20module Upholstered seat and back with polyether padding. Steel construction with Nozag springs. Back is available in wood. Replaceable seat upholstery. Moulded armrest in wood (beech, birch, oak) or fully upholstered endpiece. Underframe in powder-coated steel with plastic glide. Wooden tabletops as middle or end sections. This EPD includes the following variants: Soon SO2W: 2 section sofa with seat upholstered with 100% recycled polyester and wood back in beech, birch or oak. Soon SOB1: 1 section bench with seat upholstered with 100% recycled polyester. Soon SO1: 1 section sofa with seat and back upholstered with 100% recycled polyester. Soon SO1: 1 section sofa with seat and back upholstered with wool fabric. Soon SO1W: 1 section sofa with seat upholstered with 100% recycled polyester and wood back in beech, birch or oak. Soon SO1W: 1 section sofa with seat upholstered with wool fabric and wood back in beech, birch or oak. Soon SOC12: Corner section with seat and back upholstered with 100% recycled polyester. Included options are: E1: End-piece of silver steel section with wooden stopper. C1: Attachment end-piece of silver steel section with wooden stopper. For attaching to tables or a further section. E2: End-piece of silver steel section with armrest in laminated wood. C2: Attachment end-piece of silver steel section with armrest in laminated wood. For attaching to tables or a further section. E4: Fully upholstered end-piece with silver runner. SO E35: Table fitted to the end of a sofa/bench with an attachment end-piece. SO C55: Straight table for fitting between two sofas/benches with an attachment end-piece. SO C95: Corner table at straight angle for fitting between two sofas/benches with an attachment end-piece. SO FIX: Fittings for screwing sofa/bench/table to floor. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Specific data for the manufacturing processes (product stage A3) refers to the year 2020. All other specific data is from year of study. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | "2024-02-07" - "2029-02-07" |
| Technological representativeness | |
| Technology description including background system | Fulfilled technical standards: EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating Fulfilled fire requirements: EN 1021-1 Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette, with Kinnarps standard fabrics EN 1021-2 Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent, with Kinnarps standard fabrics |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-02-09T18:51:10 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 2aae74f2-5f61-4fc2-9d46-299a73d8b86c |
| Date of last revision | 2023-11-30T11:16:13.8812052Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-5506-4803-EN |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle