Process information
| Key Data Set Information | |
| Location | SE |
| Geographical representativeness description | Mainly Europe, but is available worldwide. |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | The upholstering and certain plastic components are manufactured at Kinnarps' production site in Skillingaryd, where the fabric is also processed. The mechanism and certain steel components are manufactured at Kinnarps' production site in Jönköping and some are purchased as premanufactured components. Final assembly of the product is done at Kinnarps' production site in Kinnarp. The flow chart below illustrates the system boundaries of the analysis. |
| Technical purpose of product or process | Capella X task chair, CFM110, black edition with plastic starbase and 100 % recycled polyester fabric. The data in this EPD applies for castors for soft flooring as well as for hard flooring. Armrests and headrest available as options. Capella X is a family of ergonomic chairs that contributes to sustainable working environments and the well-being of employees. Sitting properly and feeling good is a matter of not sitting still. These task chairs therefore keep you moving. The seat does not lock, which provides well-balanced micro-movements that allow you to move even while sitting down. The seat and back also move independently of each other, encouraging active sitting. This increases blood circulation for more energy and better health. The controls are easy to reach and intuitive to set, so you can easily customise your task chair. Capella X is a complete family of chairs that offers different functionality and areas of use depending on which version you choose. There are two different mechanisms available – FreeMotion®, where seat and back move independently, or SyncMotion™, where the seat and back move synchronously. Choose between low or high back, and two different variants of armrests (4D Ax armrest or 5D armrest). The chair is available in black, beige or a polished finish. This EPD includes the following variants: Capella X, CFM110, beige edition with aluminium starbase and 100% recycled polyester fabric Capella X, CFM120, black edition with plastic starbase and 100 % recycled polyester fabric Capella X, CFM110, black edition with plastic starbase and wool-blend fabric Included options are: Armrest 4D Armrest 5D Headrest with 100% recycled polyester fabric |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-03-03 - 2030-03-03 |
| Technological representativeness | |
| Technology description including background system | Fulfilled technical standards: EN 1335-1 Dimensions EN 1335-2 Safety requirements, tested for 130 kg user weight Fulfilled fire requirements: EN 1021-1 Assessment of the ignitability of upholstered furniture – part 1: Ignition source smouldering cigarette, with Kinnarps' standard fabrics EN 1021-2 Assessment of the ignitability of upholstered furniture – part 2: Ignition source match flame equivalent, with Kinnarps' standard fabrics |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-03-22T14:46:23 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 242ed374-a7a1-4c9e-91f5-06cf7b1c6251 |
| Date of last revision | 2025-02-20T07:23:05.2833623Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-9216-8804 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle