Process Data set: Enamelled Triple Glazed Unit - 8mm/6mm/10,76 TL (en)

Process Data set: Enamelled Triple Glazed Unit - 8mm/6mm/10,76 TL (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Scandinavia and the UK
Reference year	2025
Name	Enamelled Triple Glazed Unit - 8mm/6mm/10,76 TL
Use advice for data set	Modules A1-A5 are included in the analysis. It includes the extraction and production of raw materials, transportation to the factory, the production process itself, transportation and assembly. C1-C4 are included in the analysis. It includes the end of life stage. Section D is also included it describes the Reuse-Recovery-Recycling-potential.
Technical purpose of product or process	The product is a triple-glazed insulating glass unit designed for use in facades, curtain walls, and windows where both durability and energy efficiency are required. The glazing combines toughened low-iron glass, an enamelled pane, and a toughened laminated float glass inner pane, ensuring high mechanical strength, safety performance, and thermal insulation. This configuration is suitable for applications in both commercial and residential buildings, providing long-term stability and design flexibility. The insulating glass unit consists of three panes with two 14 mm spacer cavities: Outer pane: 8 mm toughened low-iron glass with Magnetron® coating Middle pane: 6 mm toughened low-iron glass with enamel Inner pane: 10.76 mm toughened laminated float glass This assembly offers enhanced thermal insulation, solar control through coatings and enamel, as well as increased safety and acoustic performance from the laminated inner pane.
Classification	Class name : Hierarchy level EPDNorge: Construction
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Glaseksperten A/S
Quantitative reference
Reference flow(s)	Enamelled Triple Glazed Unit - 8mm/6mm/10,76 TL - 1.0 * 1.0 qm (Area)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.2480500002 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-11-30 - 2030-11-30
Publication date	2025-11-30
Technological representativeness
Technology description including background system	Complies with the requirements of EN 1279-5:2018 and EN 1279-6:2018 - Insulating floatglass units acc. To GTC Complies with the requirements of DS-EN 12150-1:2015 Glass in building. Thermally toughened soda lime silicate safety glass - Part 1. DS-EN 14449:2005 Glass in building - Laminated glass and laminated safety glass. DS-EN 12600:2003 Glass in building. Pendulum test - Impact test method for float glass.

Modelling and validation

Subtype

specific dataset

LCA methodology report

NS-EN 17074 Glass in building PCR

Data sources, treatment and representativeness

Documentation of data quality management

NS-EN 17074 Glass in building PCR

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-12599-12753_Enamelled-Triple-Glazed-Unit---8mm-6mm-10-76-TL.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-11-30T21:35:19
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	1d63816a-5c3f-4db9-a89b-473e0ef9f475
Date of last revision	2025-10-07T13:43:07.0811784Z
Data set version	00.02.001
Registration authority	EPD Norway
Registration number	NEPD-12599-12753
Owner of data set	Glaseksperten A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Production A1-A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	261.7	0.4784	0.003898	0.4884	0.1831	0.01867	-46.25
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	8.329	0	-8.329	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	270.1	0.4784	-8.325	0.4884	0.1831	0.01867	-46.25
Use of non renewable primary energy (PENRE)	Input	MJ	1444	33.42	0.1897	34.12	1.853	0.864	-582.6
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	66.48	0	0	0	-66.48	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	1511	33.42	0.1897	34.12	-64.63	0.864	-582.6
Use of secondary material (SM)	Input	kg	2.994	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	7.045	0.01712	0.0001137	0.01747	0.005266	0.0004867	-0.003401
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.2797	0.0612	0.001295	0.06248	0.001556	0.01567	-1.151
Use of net fresh water (FW)	Input	m3	0.9929	0.003574	0.0001381	0.003649	0.007474	0.0007847	-0.3239
Hazardous waste disposed (HWD)	Output	kg	0.05882	0.001724	0	0.00176	0.0004285	3.179	-0.2006
Non hazardous waste dispose (NHWD)	Output	kg	10.13	1.625	0.6	1.659	3.169	0.2143	-3.698
Radioactive waste disposed (RWD)	Output	kg	0.02183	0.0002277	0	0.0002324	0.000004079	0.000005227	-0.001916
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	3.84	0	0.00001408	0	57.54	0	0
Materials for energy recovery (MER)	Output	kg	0.06078	0	0.5951	0	4.643	0	0
Exported electrical energy (EEE)	Output	MJ	0.03612	0	0.414	0	2.067	0	0
Exported thermal energy (EET)	Output	MJ	0.5464	0	6.263	0	31.28	0	0

Core environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	1.47E+3	33.42	0.1897	34.12	1.848	0.8639	-582.5
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.002002	0.00006106	2.618E-7	0.00006233	7.796E-7	6.351E-7	-0.004643
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.4669	0.006352	0.0001298	0.006485	0.001186	0.0002721	-0.5759
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.8865	0.0009149	0.9096	0.000934	0.0007258	0.0000299	-0.5179
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	101.7	2.21	0.01615	2.257	4.859	0.04214	-54.61
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	102.5	2.212	0.9257	2.258	4.859	0.04218	-55.15
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.06186	0.0007867	0.000004141	0.0008032	0.0001893	0.00001152	-0.02225
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	109	2.212	0.01615	2.258	4.859	0.04258	-55.11
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001758	0.00001766	1.935E-7	0.00001803	0.000006742	4.439E-7	-0.0009778
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.09788	0.001257	0.00005571	0.001283	0.0003444	0.00009599	-0.09083
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	1.225	0.01406	0.0005967	0.01435	0.003816	0.001062	-1.114
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.2819	0.005386	0.0001534	0.005498	0.0009827	0.0003052	-0.2713
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000003713	5.007E-7	2.579E-9	5.112E-7	1.414E-8	1.159E-8	-0.01602
Water (user) deprivation potential (WDP)	m3 world eqv.	3822	32.33	0.2921	33	7.992	2.276	-538.9

Additional environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	2.271	0.1461	0.0006878	0	0.1491	0.00747	0.003527	-1.419
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001226	1.353E-7	1.587E-9	0	1.382E-7	1.188E-8	4.842E-9	-0.000005813
Potential Soil quality index (SQP)²	unitless	631.5	23.38	0.1064	0	23.87	0.3339	1.923	-297.9
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	4.738E-7	2.706E-8	1.153E-9	0	2.763E-8	4.636E-9	6.73E-10	-4.109E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.065E-8	0	2.4E-11	0	0	1.35E-10	2.3E-11	-1.266E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	642	24.77	0.216	0	25.29	10.68	0.5987	-1178